DOWNLOAD the newest Pass4guide JN0-364 PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=1nKQqjutOPepTbnpNn2A-hDcmM8SV6gKz
It is well known that certificates are not versatile, but without a Juniper JN0-364 certification you are a little inferior to the same competitors in many ways. Compared with the people who have the same experience, you will have the different result and treatment if you have a Service Provider Routing and Switching, Specialist (JNCIS-SP) JN0-364 Certification.
| Section | Weight | Objectives |
|---|---|---|
| Topic 1: Multiprotocol Label Switching (MPLS) | 12-18% | - Labels and LIB - Segment routing basics - Terminology and forwarding - Configuration and monitoring - LDP and RSVP |
| Topic 2: Open Shortest Path First (OSPF) | 15-20% | - Areas and router types - Link-state database - Configuration and troubleshooting - LSA types and operation |
| Topic 3: IPv6 | 8-12% | - Autoconfiguration - Address types and format - Static and dynamic routing - OSPFv3 and BGP for IPv6 |
| Topic 4: High Availability | 5-8% | - Nonstop active routing - NSR and GRES concepts - Graceful restart |
| Topic 5: Protocol-Independent Routing | 10-15% | - Routing instances and RIB groups - Load balancing - Static, aggregate, and generated routes - Martian addresses - Filter-based forwarding |
| Topic 6: Tunnels | 5-8% | - GRE and IP-IP tunnels - Tunnel configuration and usage |
| Topic 7: Spanning Tree Protocols | 8-12% | - Configuration and convergence - Port roles and states - STP, RSTP, MSTP, VSTP - BPDU and protection features |
| Topic 8: Border Gateway Protocol (BGP) | 20-25% | - Policy and route filtering - Path selection and attributes - Configuration and troubleshooting - IBGP and EBGP - Basic operation and message types |
| Topic 9: Intermediate System to Intermediate System (IS-IS) | 10-15% | - PDUs and TLVs - Adjacencies and levels - Metrics and wide metrics - Configuration and monitoring |
| Topic 10: Layer 2 Bridging and VLANs | 8-12% | - VLANs and trunking - Service provider switching features - Bridging concepts |
Although the Juniper JN0-364 exam prep is of great importance, you do not need to be over concerned about it. With scientific review and arrangement from professional experts as your backup, and the most accurate and high quality content of our Juniper JN0-364 Study Materials, you will cope with it like a piece of cake. So Juniper JN0-364 learning questions will be your indispensable practice materials during your way to success.
NEW QUESTION # 60
Click the Exhibit button.
Referring to the exhibit, R1 and R2 are configured to run IS-IS. The IS-IS adjacency between R1 and R2 is up.
What does the output of the show isis interfacecommand tell you about R1?
Answer: D
Explanation:
The interface output shows Level 1 is disabled on ge-0/0/0.0 while Level 2 is operating as point- to-point. This indicates R1 is forming only a Level 2 IS-IS adjacency with R2 on that link.
NEW QUESTION # 61
Which two statements are correct about IS-IS? (Choose two.)
Answer: A,C
Explanation:
A Level 1 router can become adjacent with the Level 1 and Level 1-2 (L1/L2) router. A Level 2 router can become adjacent with Level 2 or Level 1-2 (L1/L2) router. There is no adjacency between L1 only and L2 only router. HOWEVER: If two routers are in different areas, they can only form a Level 2 adjacency. As such, two routers in different areas can NOT form a Level 1 adjacency. If you want two routers to form a Level 1 adjacency, they have to be in the same area.
IS-IS (Intermediate System to Intermediate System) operates at two levels: Level 1 and Level 2.
Level 1 routers are only aware of their own area's topology, while Level 2 routers have knowledge of the topology across areas. A Level 1 router cannot form an adjacency with a Level 2 router unless the Level 2 router is also operating as a Level 1 router (Level 1-2 router). Level 2 routers can form adjacencies regardless of their area IDs because Level 2 operates at the domain level and is used to interconnect different IS-IS areas.
NEW QUESTION # 62
You are evaluating BGP between two Juniper routers and the BGP session is stuck in the Idle state. What would cause this behavior?
Answer: B
Explanation:
In the BGP Finite State Machine (FSM), theIdlestate is the first stage of any BGP connection. When a BGP session is "stuck" in Idle, it typically indicates that the router is unable to even begin the process of establishing a TCP connection with its neighbor. According to Juniper Networks documentation, before BGP can transition to theConnectorActivestates, it must have a valid route to the neighbor's IP address in the routing table and be able to initiate a three-way TCP handshake on port 179.
If thepeer IP address is incorrect(Option D), the router may not have a route to that destination, or it may be attempting to connect to a non-existent or unreachable host. In many Junos configurations, if the underlying IGP (OSPF/IS-IS) or static routing cannot provide reachability to the neighbor address defined in the BGP configuration, the BGP process will remain in the Idle state and periodically retry the connection.
Regarding the other options:
* The local AS number is missing (Option C):In Junos, you cannot commit a BGP configuration if the local autonomous system is not defined at either the [edit routing-options] level or within the BGP group itself. The commit check would fail before the session could even attempt to start.
* The BGP group type (Option B):Having a mismatch in group type (internal vs. external) usually results in the session reaching theOpenSentorOpenConfirmstate before failing due to an
"unacceptable AS" error in the OPEN message.
* BGP hold time (Option A):Issues with hold timers or keepalives generally cause a session that is already in theEstablishedstate to drop; they do not prevent the session from leaving the Idle state.
NEW QUESTION # 63
Referring to the exhibit, what must be included in the Route1 configuration when establishing an EBGP session with the ISP?
Answer: A
Explanation:
When establishing an EBGP session, it's necessary to specify both the local AS number and the local address that the session will use. The local address is required for establishing the TCP connection for BGP. The local AS must be specified to identify the autonomous system of the router.
NEW QUESTION # 64
When considering BGP route propagation, which two statements are correct? (Choose two.)
Answer: B,C
NEW QUESTION # 65
......
You can adjust the speed and keep vigilant by setting a timer for the simulation test. At the same time online version of JN0-364 test preps also provides online error correction— through the statistical reporting function, it will help you find the weak links and deal with them. Of course, you can also choose two other versions. The contents of the three different versions of JN0-364 learn torrent is the same and all of them are not limited to the number of people/devices used at the same time.
Online JN0-364 Training: https://www.pass4guide.com/JN0-364-exam-guide-torrent.html
DOWNLOAD the newest Pass4guide JN0-364 PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=1nKQqjutOPepTbnpNn2A-hDcmM8SV6gKz