We have applied the latest technologies to the design of our SRAN-Radio-Network-Performance-Optimization exam prep not only on the content but also on the displays. As a consequence you are able to keep pace with the changeable world and remain your advantages with our SRAN-Radio-Network-Performance-Optimization training braindumps. Besides, you can consolidate important knowledge for you personally and design customized study schedule or to-do list on a daily basis. As long as you follow with our SRAN-Radio-Network-Performance-Optimization Study Guide, you are doomed to achieve your success.
| Section | Weight | Objectives |
|---|---|---|
| SRAN Optimization Tools and Reports | 10-15% | - Configuration management for optimization - Report generation and interpretation - Automated optimization features - Nokia NetAct and performance tools |
| SRAN Architecture and Fundamentals | 15-20% | - SRAN network architecture overview - SRAN solution components and functions - Radio access concepts and principles - Single RAN integration principles |
| Performance Troubleshooting | 20-25% | - Troubleshooting tools utilization - Common performance issues diagnosis - Network failure identification and resolution - Root cause analysis methodologies - Optimization case studies |
| Radio Network Optimization Techniques | 25-30% | - Capacity optimization strategies - Parameter tuning best practices - Handover optimization - Load balancing techniques - Interference analysis and mitigation - Coverage optimization methods |
| Radio Network Performance Monitoring | 20-25% | - KPI definition and measurement - Threshold configuration and alerting - Performance monitoring tools and dashboards - Performance data collection and analysis - Real-time network monitoring techniques |
>> SRAN-Radio-Network-Performance-Optimization Valid Real Exam <<
There have been tens of thousands of our loyal customers who chose to buy our SRAN-Radio-Network-Performance-Optimization exam quetions and get their certification. These people have already had a good job opportunity and are running on their way to fulfilling their dreams after using SRAN-Radio-Network-Performance-Optimization practice quiz! Want to be like them, you must also act! Time and tide wait for no man. And you can free download the demos of the SRAN-Radio-Network-Performance-Optimization study guide, you can have a try before purchase.
NEW QUESTION # 29
In a 5G cell , the following parameter has been modified: lowLatencyReservation = 15 .
Which percentage of UEs will be reallocated to a higher SR periodicity group whenever the threshold for moving to a higher SR periodicity group is reached?
Answer: B
Explanation:
The correct answer is C .
In 5G uplink scheduling, SR , or Scheduling Request , is used by the UE to request uplink resources when it has data to send. SR periodicity affects uplink latency and PUCCH capacity: shorter SR periodicity gives lower latency but consumes more control-channel resources, while longer SR periodicity saves resources but increases delay.
The parameter lowLatencyReservation = 15 means 15% of the UE/resource share is reserved for the low- latency SR periodicity group. When the load threshold is reached, the remaining portion can be moved to a higher SR periodicity group.
Calculation:
100% # 15% = 85%
So the percentage of UEs that can be reallocated to a higher SR periodicity group is:
0.85 , or 85% .
NEW QUESTION # 30
Consider that the UE is performing handover from LTE to NR with the help of features CB007742 / CB008731 . Referring to the picture below, at what stage can the handover be triggered from LTE to NR?
Answer: C
Explanation:
The correct answer is C: From Stage 3 .
In LTE-to-NR mobility, the handover or redirection decision is normally based on a combination of:
LTE serving-cell signal level becoming weak enough, and
NR neighbor-cell signal level becoming strong enough.
From the diagram:
In Stage 1 , LTE is still good and NR is still weak, so LTE-to-NR HO should not be triggered.
In Stage 2 , the NR neighbor signal is improving, but the required combined LTE/NR mobility condition is not yet fully satisfied.
In Stage 3 , the NR neighbor signal has crossed the required NR threshold, while the LTE serving-cell signal has degraded enough to justify moving the UE from LTE to NR. This is the first valid stage where LTE-to- NR HO can be triggered.
In Stage 4 , NR is already clearly strong, but the handover could already have been triggered earlier in Stage 3.
NEW QUESTION # 31
In the context of mmWave deployments , what is the primary benefit of analog beamforming ?
Answer: C
Explanation:
The correct answer is A .
In mmWave systems, beamforming is essential because FR2 signals suffer from high path loss and blockage.
Analog beamforming uses fewer RF chains than fully digital beamforming, so it is cheaper and less complex in terms of RF hardware, power consumption, and implementation. Research and industry references explain that analog and hybrid beamforming architectures reduce the number of required ADCs/RF chains compared with fully digital beamforming, lowering cost and power complexity.
However, analog beamforming has limitations. It usually forms one beam, or a limited number of beams, at a time from a panel. Supporting multiple independent simultaneous beams and more UEs per sector is more associated with digital or hybrid beamforming, not pure analog beamforming.
Therefore, the primary benefit is:
Low cost and low complexity for coverage at higher mmWave bands.
NEW QUESTION # 32
In a 5G NSA Option 3x deployment, why should we not define 5G neighbors in LTE sectors where there is no 5G coverage ?
Answer: D
Explanation:
The correct answer is A .
In 5G NSA Option 3x , LTE acts as the Master Cell Group , and NR acts as the Secondary Cell Group , usually added through EN-DC . If 5G NR neighbors are configured in an LTE sector where there is actually no 5G coverage , the LTE eNB may still configure the UE to perform NR measurements.
To perform NR inter-RAT or inter-frequency measurements, the UE may require measurement gaps .
During these gaps, the UE stops normal LTE reception/transmission activities to measure NR frequencies. If there is no real 5G coverage, those gaps become wasted measurement time and can reduce LTE user throughput.
Option B is not the best answer because if there is no 5G coverage, the main issue is not successful SCG addition or handover degradation, but unnecessary measurement activity. Option C is also not correct because redirection from 5G to 4G normally occurs when the UE is already on or connected to 5G coverage, which is not the case here.
Therefore, the main reason is:
LTE throughput degradation due to unnecessary measurement gap configuration.
NEW QUESTION # 33
At which mark are all conditions fulfilled for energy saving , so the cell will be switched off? Refer to the image below.
Answer: B
Explanation:
The correct answer is B , which corresponds to mark C in the diagram.
In the diagram, the energy-saving process follows these stages:
Before mark B , the cell is entering the power-saving period, but the required load condition has not yet been satisfied for the required duration.
At mark B , the measured load has gone below the configured threshold, but the cell is not switched off immediately. The system must confirm that the load remains below the required threshold for the configured time.
At mark C , the load has stayed below the required threshold for the required duration, shown as 5 minutes in the diagram. At this point, all conditions are fulfilled, and the cell can be switched off. The diagram also shows the state becoming:
energySavingState = energySaving
Marks D and E are already inside or near the later part of the power-saving period. Mark E is associated with operator suspension/exit behavior, not the initial moment when all switch-off conditions are first fulfilled.
NEW QUESTION # 34
......
It is generally acknowledged that candidates who earn the MN: NCSS NPS - SRAN Radio Network Performance Optimization Certification Exam | GS40-NPS-SRPER-E-S03-2510 (SRAN-Radio-Network-Performance-Optimization) certification ultimately get high-paying jobs in the tech market. Success in the MN: NCSS NPS - SRAN Radio Network Performance Optimization Certification Exam | GS40-NPS-SRPER-E-S03-2510 (SRAN-Radio-Network-Performance-Optimization) exam not only validates your skills but also helps you get promotions. To pass the MN: NCSS NPS - SRAN Radio Network Performance Optimization Certification Exam | GS40-NPS-SRPER-E-S03-2510 test in a short time, you must prepare with SRAN-Radio-Network-Performance-Optimization Exam Questions that are real and updated. Without studying with SRAN-Radio-Network-Performance-Optimization actual questions, candidates fail and waste their time and money.
SRAN-Radio-Network-Performance-Optimization Practice Exams: https://www.validtorrent.com/SRAN-Radio-Network-Performance-Optimization-valid-exam-torrent.html