With the help of our VNX301 practice dumps, you will be able to feel the real exam scenario. It is better than VNX301 dumps questions. If you want to pass the Versa Networks VNX301 exam in the first attempt, then don’t forget to go through the VNX301 practice testprovided by the TestInsides. It will allow you to assess your skills and you will be able to get a clear idea of your preparation for the real Versa Networks VNX301 Exam. It is the best way to proceed when you are trying to find the best solution to pass the VNX301 exam in the first attempt.
| Certification Vendor: | Versa Networks |
|---|---|
| Exam Name: | Versa Certified SD-WAN Specialist |
| Exam Number: | VNX301 |
| Related Certifications: | Versa Certified SD-WAN Expert |
| Exam Format: | Multiple Select, Multiple Choice |
| Exam Price: | USD 250 |
| Exam Duration: | 90 minutes |
| Real Exam Qty: | 60 |
| Passing Score: | 70% |
| Available Languages: | English |
| Certificate Validity Period: | 3 years |
| Sample Questions: | Versa Networks VNX301 Sample Questions |
| Exam Way: | Online proctored exam at Pearson VUE test centers |
| Pre Condition: | Recommended: Basic networking knowledge (CCNA/equivalent), familiarity with WAN technologies and enterprise network design |
| Official Syllabus URL: | https://www.versa-networks.com/partners/training-certification.html |
>> VNX301 Reliable Braindumps Questions <<
The VNX301 PDF dumps are suitable for smartphones, tablets, and laptops as well. So you can study actual VNX301 questions in PDF easily anywhere. TestInsides updates Versa Certified SD-WAN Specialist (VNX300) PDF dumps timely as per adjustments in the content of the actual Versa Networks VNX301 Exam. The Desktop Versa Certified SD-WAN Specialist (VNX300) practice exam software is created and updated in a timely by a team of experts in this field. If any problem arises, a support team is there to fix the issue.
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
NEW QUESTION # 48
A tenant has two internet circuits and one LTE backup circuit. The forwarding profile lists the internet circuits with priority 1 and LTE with priority 2. The next-hop selection method is Load Balance. What is the expected behavior while both internet circuits are healthy?
Answer: D
Explanation:
The correct answer is A . In Versa SD-WAN forwarding profiles, next-hop priorities define which circuits are preferred. When the Load Balance next-hop selection method is used and two circuits share the same priority, sessions can be distributed across those equal-priority paths as long as they are usable and SLA- compliant. A lower priority number represents a more preferred group than a higher priority number.
Therefore, two circuits with priority 1 are preferred over LTE with priority 2 .
In this scenario, both internet circuits are healthy and both have priority 1. The VOS device should load- balance sessions across those two circuits. LTE remains available as a lower-priority backup path and would normally be considered only when the preferred internet circuits are unavailable, fail path checks, or no longer meet the applicable policy conditions.
Traffic is not replicated because replication is a separate feature and not implied by Load Balance. The branch does not drop traffic while valid paths exist. LTE is not preferred merely because its priority number is higher; in path selection, priority 1 is preferred over priority 2.
NEW QUESTION # 49
You configured a Versa speed-test server on a VOS device, but the client cannot start the bandwidth test. A firewall exists between the client and server. Which port must be allowed through the firewall?
Answer: D
Explanation:
The correct answer is A . Versa link-bandwidth troubleshooting documentation explains that a VOS device can be configured as a Versa speed-test client, a Versa speed-test server, or both simultaneously. After the server is configured, the client starts the test by initiating a TCP-based connection toward the speed-test server. The server listens on port 5201 . The documentation includes an explicit note that if the VOS device is behind a firewall, port 5201 must be open .
This is different from the SD-WAN overlay data path, which commonly uses UDP-based transport encapsulation, and different from internet speed-test traffic, which uses other ports depending on the specific test type. In this scenario, the question states that a Versa speed-test server was configured, so the relevant requirement is TCP 5201 reachability from the client to the server.
TCP 443 may be used for management or web access, UDP 4790 is associated with SD-WAN transport encapsulation, and UDP 53 is DNS. None of those replace TCP 5201 for Versa speed-test server operation.
NEW QUESTION # 50
You are troubleshooting a branch that cannot form SD-WAN overlay tunnels. The branch has WAN interfaces up, but you suspect remote endpoint objects were not learned. Which VSM command should you use to verify whether remote site objects were learned from BGP or from configuration?
Answer: A
Explanation:
The correct answer is A . Versa data-path troubleshooting documentation gives a specific VSM control-plane workflow for checking SD-WAN tunnel objects. After connecting to the VSM daemon, administrators can use show vsm p2mp local-tunnel-sites 0 to inspect local site objects. To check whether remote site objects were learned from BGP or from configuration , Versa instructs administrators to issue show vsm p2mp tunnel-remote-endpoint tenant < tenant-id > on the VSM control plane.
This command is highly relevant when local WAN interfaces are operational, but overlay tunnel formation is incomplete. It shows remote endpoints such as Controllers, hubs, or branches, along with site type, site name, branch ID, tenant ID, remote WAN link information, and tunnel state-related fields.
show interfaces brief confirms interface state and IP addresses, but it does not show learned remote SD- WAN endpoint objects. CGNAT summary is unrelated to tunnel endpoint learning. System storage is useful for disk checks, but not for SD-WAN overlay endpoint troubleshooting.
NEW QUESTION # 51
During onboarding, Versa Director shows the first branch-connect notification for a new CPE, but no later staged branch-connect notification appears. Which troubleshooting area should be investigated first?
Answer: D
Explanation:
The correct answer is B . Versa branch lifecycle notifications are generated at different stages of onboarding.
The first notification indicates that the branch connected using factory-default configuration. After that notification, Versa Director pushes the staging configuration to the branch and requests a reboot. After rebooting with staging configuration, the branch should connect again to the Controller, and a later branch- connect notification should appear.
If this later staged connection notification does not appear, Versa's troubleshooting guidance says to debug either the data path or IPsec connectivity from the branch to the Controller. This makes sense because the branch must have working transport reachability and IKE/IPsec establishment toward the Controller before it can continue the SD-WAN lifecycle.
Analytics disk usage, LDAP authentication, and URL filtering are not part of the branch staging control path. They may affect monitoring, user identity, or security inspection after the site is operational, but they do not explain why the branch stops after the initial factory-default onboarding notification.
NEW QUESTION # 52
Examine the exhibit below.
Spoke1 and Spoke2 are part of Spoke-to-Hub-Only spoke group, the hub is advertising a default route to both the spokes.
Referring to the exhibit, which statement is true?
Answer: C
Explanation:
In Versa SD-WAN, a Spoke-to-Hub-Only topology is specifically designed for deployments where spoke branches communicate only with hub resources and not with other spokes. Versa's SD-WAN design documentation states that in a spoke-to-hub-only topology, the default behavior is that only hub routes are advertised, and spoke routes are not re-advertised by the hub branch. It also explains that this topology is used when spokes do not have to communicate with each other.
Even though the hub in the exhibit advertises a default route, that does not change the topology behavior into spoke-to-spoke communication. The default route can attract unknown traffic from the spokes toward the hub, but the Spoke-to-Hub-Only policy prevents the spoke prefixes from being redistributed or imported in a way that allows spoke-to-spoke reachability. Versa documentation further shows that spoke routes are filtered using BGP communities and import policies, and that the spoke route table contains only destinations behind the hubs, not other spoke routes.
NEW QUESTION # 53
......
VNX301 Free Updates: https://www.testinsides.top/VNX301-dumps-review.html