P.S. Free & New JN0-352 dumps are available on Google Drive shared by Itcertking: https://drive.google.com/open?id=1uMd9O64qUltQgljAP9-L4fp1QGP01Muc
We are dedicated to providing our clients with the most current and accurate Enterprise Routing and Switching, Specialist (JNCIS-ENT) study material. That is why we provide 1 year of free JN0-352 questions updates if the Juniper certification test content changes after your purchase. With this option, our clients can confidently use the most up-to-date and dependable JN0-352 preparatory material.
| Section | Weight | Objectives |
|---|---|---|
| Topic 1: IS-IS | 10-15% | - Configuration and route exchange - Adjacency establishment, levels and metrics - Scalable enterprise deployment and troubleshooting |
| Topic 2: Layer 2 Security | 10-15% | - DHCP snooping, Dynamic ARP Inspection and IP Source Guard - Layer 2 firewall filters and security features - Port security, MAC limiting and storm control |
| Topic 3: High Availability and Resiliency | 5-10% | - Redundancy protocols and failover mechanisms - Network resiliency design and troubleshooting - Graceful restart and non-stop routing |
| Topic 4: Tunnels and Overlays | 5-10% | - Tunnel types, encapsulation and operation - Overlay network design and connectivity - GRE, IP-IP and dynamic tunnel configuration |
| Topic 5: Protocol Independent Routing | 10-15% | - Routing instances and route selection criteria - Basic routing policy and filter operation - Routing tables, static routes and route preference |
| Topic 6: BGP | 15-20% | - Neighbor relationships and session establishment - Route advertisement, attributes and path selection - Routing policies, filtering and common troubleshooting |
| Topic 7: OSPF | 15-20% | - Neighbor formation, area design and LSA types - Configuration, verification and troubleshooting - Route summarization and redistribution |
| Topic 8: Layer 2 Switching and VLANs | 15-20% | - Link Aggregation Groups (LAG) and Virtual Chassis - VLAN concepts, configuration, trunking and tagging - Spanning Tree Protocol (STP, RSTP, MSTP) operation and configuration |
| Topic 9: IP Multicast | 5-10% | - Multicast routing monitoring and troubleshooting - IGMP operation and configuration - PIM Dense Mode, Sparse Mode and RP mechanisms |
>> Test JN0-352 Simulator Free <<
Almost everyone is trying to pass the Enterprise Routing and Switching, Specialist (JNCIS-ENT) (JN0-352) certification exam to upgrade their CVs and land desired jobs. Every applicant of the Enterprise Routing and Switching, Specialist (JNCIS-ENT) (JN0-352) exam faces just one problem and that is not finding real and Latest JN0-352 Exam Questions. Applicants are always confused about where to buy actual JN0-352 Exam Questions and prepare successfully for the Enterprise Routing and Switching, Specialist (JNCIS-ENT) (JN0-352) exam in a short time.
NEW QUESTION # 12
You have DHCP snooping enabled but no entries are automatically created in the snooping database for an interface on your EX Series switch. What are two reasons for the problem?
(Choose two.)
Answer: A,C
Explanation:
If the device connected to the interface has performed a DHCPRELEASE, it releases its IP address back to the DHCP server, resulting in the removal of the corresponding DHCP snooping entry.
If the device connected to the interface is using a static IP address, it will not send DHCP requests, and therefore no entries will be created in the DHCP snooping database for that device.
NEW QUESTION # 13
A host connected to interface ge-0/0/3 on your Juniper Networks EX Series Switch cannot reach another device in the same VLAN. The administrator wants to confirm that the switch has learned the MAC address of the host. Which command should be used to accomplish this task?
Answer: D
Explanation:
The show ethernet-switching table command displays the Layer 2 forwarding database (the bridge or MAC table) that an EX Series switch builds dynamically by inspecting the source MAC address of every frame it receives. Each entry records the learned MAC address, the VLAN it was learned on, the type of entry (dynamic, static, or persistent), and the specific interface through which that address was seen, which is precisely the information needed to confirm whether the switch has learned the host connected to ge-0/0/3. If the host's MAC address is absent from the table, that immediately points to a Layer 1/2 issue -- no frames have been received from the host, a cabling or port problem exists, or the interface is administratively down or blocked by spanning tree -- rather than a Layer 3 routing or VLAN membership problem. show interfaces terse only reports administrative and link state along with any assigned protocol family addresses, offering no MAC-learning visibility. show vlans lists VLAN definitions and their member interfaces but does not display learned host addresses. show interfaces extensive provides detailed physical-layer counters and error statistics, useful for diagnosing frame loss or interface errors, but it does not expose the switching table. For intra-VLAN reachability troubleshooting, verifying MAC learning is always the first and most direct Layer 2 checkpoint.
NEW QUESTION # 14
You need to block SSH (TCP port 22) traffic from the 192.168.10.0/24 network.
Which firewall filter term is correct in this scenario?
Answer: C
Explanation:
Correctly blocking SSH traffic originating from a specific network requires matching three precise conditions simultaneously in the from clause: the traffic's source-address must equal the 192.168.10.0/24 network, since the requirement is to block traffic coming from that network rather than traffic destined to it; the protocol must be explicitly set to tcp, since SSH operates exclusively over TCP; and the destination-port must be set to
22, because an inbound SSH connection request is always directed at the well-known SSH listening port 22 on the receiving side, regardless of which ephemeral source port the initiating client happens to use. The first option satisfies all three conditions correctly and pairs them with a discard action, cleanly dropping matching traffic. The second option incorrectly substitutes destination-address for source-address, which would match traffic heading toward that /24 rather than traffic originating from it, inverting the intended match direction.
The third option incorrectly uses source-port 22 instead of destination-port 22; since the SSH client's source port is a randomly assigned ephemeral value rather than a fixed 22, this term would almost never match real SSH session-initiation traffic. The fourth option relies on a service ssh match condition, which is not valid syntax within the standard Junos firewall filter grammar for family inet; there is no such application-based keyword available at that hierarchy, making the term invalid regardless of the reject action chosen. Reference topics: Junos Enterprise Switching - Firewall Filters, Matching on Address, Protocol, and Port Conditions.
NEW QUESTION # 15
Which three actions are required for filter-based forwarding? (Choose three.)
Answer: B,D,E
NEW QUESTION # 16
Two routers share the same highest priority and start time. In this situation, what is evaluated next when determining the designated router?
Answer: C
Explanation:
According to the OSPF protocol, the designated router (DR) is the router that acts as the focal point for exchanging routing information on a multi-access network segment, such as a LAN. The DR election process is based on the following criteria, in order of precedence:
The router with the highest OSPF priority becomes the DR. The default priority is 1, and a priority of 0 means the router will not participate in the election.
If there is a tie in priority, the router with the highest router ID becomes the DR. The router ID is a
32-bit number that uniquely identifies a router in an OSPF domain. It can be manually configured or automatically derived from the highest IP address of a loopback interface or a physical interface. If there is a tie in router ID, the router that was first to become an OSPF neighbor becomes the DR. In your scenario, two routers share the same highest priority and start time.
This means that they have equal chances of becoming the DR based on the first and third criteria. Therefore, the second criterion will be used to break the tie, which is the router ID. The router with the highest router ID will become the DR, and the other router will become the backup designated router (BDR), which is ready to take over the role of DR if it fails.
NEW QUESTION # 17
......
The purchase process of our JN0-352 question torrent is very convenient for all people. In order to meet the needs of all customers, our company is willing to provide all customers with the convenient purchase way. The PDF version of our JN0-352 study tool is very practical, which is mainly reflected on the special function. As I mentioned above, our company are willing to provide all people with the demo for free. You must want to know how to get the trial demo of our JN0-352 question torrent; the answer is the PDF version. You can download the free demo form the PDF version of our JN0-352 exam torrent. Maybe you think it does not prove the practicality of the PDF version, do not worry, we are going to tell us another special function about the PDF version of our JN0-352 study tool.
JN0-352 Interactive EBook: https://www.itcertking.com/JN0-352_exam.html
P.S. Free & New JN0-352 dumps are available on Google Drive shared by Itcertking: https://drive.google.com/open?id=1uMd9O64qUltQgljAP9-L4fp1QGP01Muc