It is a challenging exam and not a traditional exam. But complete Fortinet NSEI_OTS_AR-7.6 exam preparation can enable you to crack the Fortinet NSEI_OTS_AR-7.6 exam easily. For the quick and complete Fortinet NSE I - OT Security 7.6 Architect (NSEI_OTS_AR-7.6) exam preparation you can trust NSEI_OTS_AR-7.6 Exam Practice test questions. The Fortinet NSEI_OTS_AR-7.6 exam practice test questions have already helped many Fortinet NSEI_OTS_AR-7.6 exam candidates in their preparation and success.
| Section | Weight | Objectives |
|---|---|---|
| Topic 1: Network Security | 25% | - Virtual patching for legacy OT systems - Deep inspection for industrial protocols (Modbus, DNP3, OPC) - Security automation and threat response |
| Topic 2: Network Access Control | 25% | - OT Ethernet and industrial communication models - Authentication and access policies for OT devices - Purdue Model and secure network segmentation |
| Topic 3: Monitoring and Risk Assessment | 25% | - Event handling and logging with FortiAnalyzer 7.6 - Threat detection using FortiSIEM 7.4 - OT-focused risk assessment and management |
| Topic 4: Asset Management | 25% | - Device detection and inventory using FortiGate & FortiNAC - OT security standards and compliance (IEC 62443, NIST) - Fortinet Security Fabric for OT environments |
>> Fortinet NSEI_OTS_AR-7.6 Exam Introduction <<
Unlike some products priced heavily and too heavy to undertake, our NSEI_OTS_AR-7.6 practice materials are reasonable in price. So our NSEI_OTS_AR-7.6 guide dumps are financially desirable. On the other side, Products are purchasable, knowledge is not, and our NSEI_OTS_AR-7.6 practice materials can teach you knowledge rather than charge your money. As well as free demos of NSEI_OTS_AR-7.6 real exam for your reference, you can download them before purchase.
NEW QUESTION # 14
Refer to the exhibit.
A Virtual Patching profile is shown. You have recently updated your SCADA system and would like to apply the SCADA virtual patching profile. Which two statements about this profile are correct? (Choose two answers)
Answer: C,D
Explanation:
The correct answers are B and D .
Option B is correct because the profile has Medium , High , and Critical selected, while Low severity is not selected. That means low-severity virtual patching signatures are not enforced by this profile. So for the device with MAC address 12:12:12:12:12 , low-severity signatures are not blocked. The study guide explains virtual patching as device-specific protection where "FortiGate caches the signatures and mitigation rules that apply to each device" and applies them when the related traffic matches the firewall policy.
Option D is correct because the Virtual Patching Exemptions table shows a row with the MAC address 11:
11:11:11:11 and no specific signature listed. The study guide states that in the Virtual Patching profile you can "Exempt a specific device with the MAC address or a specific signature." A MAC-only exemption means that specific device is excluded from virtual patching enforcement, so in practical terms it is treated as having no applicable vulnerabilities in this profile.
Option C is incorrect because the profile does not block critical signatures for all devices. The exemptions list proves that at least one device can be excluded by MAC address, and a specific signature can also be exempted. Therefore, enforcement is not universal across all devices.
Option A is incorrect because the entry Schneider.Electric.ClearSCADA.HTTP.Interface.XSS appears as a specific signature exemption , not as the only remaining vulnerability. The profile display is showing exemptions, not a statement that only one vulnerability is still present.
NEW QUESTION # 15
What is the main OT component for monitoring and controlling industrial processes? (Choose one answer)
Answer: B
Explanation:
The correct answer is C. Industrial Control System (ICS) . The study guide states that "ICS is a main component of OT" and "consists of systems used for monitoring and controlling industrial processes." It also explains that ICS includes various devices, systems, controls, and networks that manage industrial processes, and that the most common types are SCADA and distributed control systems (DCS) . This makes ICS the primary OT component for monitoring and controlling industrial processes.
The other options are related OT components, but they are not the best answer to this wording. SCADA collects real-time data and helps visualize and control the OT environment, but it is described as a system within the broader ICS structure. PLC devices collect and transmit real-time data and connect sensors and RTUs to SCADA, while IIoT refers to sensors, actuators, and other connected field devices. Therefore, the overarching main OT component for monitoring and controlling industrial processes is ICS .
NEW QUESTION # 16
Refer to the exhibit.
A partial OT network is shown. In this OT network, you must add additional security measures to detect OT protocols and, therefore, increase the traffic visibility. Which security sensor must you implement to detect the OT protocols in this network? (Choose one answer)
Answer: B
Explanation:
The correct answer is C. Application sensor set to monitor on all the FortiGate devices .
The study guide clearly explains that application control is the feature used to identify OT protocols. It states that "application control detects the protocols used in applications like Modbus, IEC 104, and the contents of the telecontrol messages" and also says "You can use application control signatures to detect OT protocols." It further shows an example where a Modbus application control profile is enabled on a firewall policy "for OT protocol visibility in the monitor status." This directly matches the requirement in the question, which is to detect OT protocols and increase traffic visibility .
The other options do not fit the requirement as precisely. Device detection is for identifying devices and collecting endpoint information, not for detecting industrial protocols. Inline IDS and IPS are focused more on detecting or blocking attacks, exploits, protocol abnormalities, and known vulnerabilities. While IPS can inspect some OT traffic, the study guide distinguishes it from application control by stating that IPS signatures tend to detect exploits, whereas application control signatures tend to provide protocol detection at various levels . Therefore, the required security sensor for OT protocol detection and traffic visibility is the application sensor in monitor mode .
NEW QUESTION # 17
Refer to the exhibit.
A partial OT network is shown. You must improve the security of this OT network and implement internal segmentation between network 1 and network 2. How can you achieve the segmentation? (Choose one answer)
Answer: C
Explanation:
The correct answer is D. You can configure forward domain IDs for each network .
The study guide explains that in FortiGate transparent mode, all interfaces belong to the same broadcast domain, even interfaces with different VLAN IDs , and then states that you can "subdivide into multiple broadcast domains" by configuring set forward-domain < domain_ID > . It also states that "interfaces with the same domain ID belong to the same broadcast domain" and, with multiple forward domains,
"traffic arriving on one interface is broadcast only to interfaces in the same forward domain ID." That is the mechanism used to separate internal networks and confine traffic between network segments.
The other options do not fit this requirement. Universal ZTNA is for application access control, not segmentation between two OT networks. One traffic VDOM does not create segmentation by itself; multiple VDOMs would be needed for that type of isolation. An explicit software switch controls intraswitch traffic inside the same software-switch domain, not segmentation between separate networks like network 1 and network 2. Therefore, the correct way to implement the internal segmentation asked in the question is to assign different forward domain IDs to each network.
NEW QUESTION # 18
During layer 2 polling , which two pieces of information are gathered by FortiNAC to identify a device?
(Choose two answers)
Answer: B,C
Explanation:
According to the OT Security 7.6 Architect study guide section on Asset Management , specifically regarding FortiNAC Visibility :
* Layer 2 Polling Data : Because each physical address is unique, FortiNAC identifies hosts as they connect to the network. The information gathered during this process fills in the physical address and location information in the database.
* Visibility Components : The guide states that the physical address learned , the time it was learned , and where it was learned from provide the foundation of endpoint visibility in the form of " what, where, and when " information. This confirms that Where it was learned (Option A) and The time it was learned (Option D) are correct.
* Exclusions :
* Layer 3 Polling : The MAC-to-IP correlation (Option B) is explicitly defined as a function of Layer 3 polling , where the correlated IP address is added to the database record for the corresponding MAC address.
* DHCP Fingerprinting : The host name or system name (Option C) and the operating system are gathered via DHCP fingerprinting , not layer 2 polling.
NEW QUESTION # 19
......
Candidates who don't find actual NSEI_OTS_AR-7.6 Questions remain unsuccessful in the Fortinet NSEI_OTS_AR-7.6 test and lose their resources. That's why TorrentVCE is offering real NSEI_OTS_AR-7.6 Questions that are real and can save you from wasting time and money. Hundreds of applicants have studied successfully from our NSEI_OTS_AR-7.6 Latest Questions in one go.
NSEI_OTS_AR-7.6 Online Test: https://www.torrentvce.com/NSEI_OTS_AR-7.6-valid-vce-collection.html