DOWNLOAD the newest ExamCost 350-101 PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=1n988-HcWKDNmAkeDNtMV_0M5RRMBQLPp
To save the clients' time, we send the products in the form of mails to the clients in 5-10 minutes after they purchase our 350-101 practice guide and we simplify the information to let the client only need dozens of hours to learn and prepare for the test. To help the clients solve the problems which occur in the process of using our 350-101 Guide materials, the clients can consult about the issues about our study materials at any time. So we can say that our 350-101 training materials are people-oriented and place the clients’ experiences in the prominent position.
| Section | Objectives |
|---|---|
| Mobility and Roaming | - Mobility groups and handoff mechanisms - Client roaming behavior |
| Wireless Fundamentals | - WLAN components and architecture basics - RF principles and radio frequency behavior - 802.11 standards overview |
| Wireless Security | - 802.1X and authentication methods - WPA/WPA2/WPA3 security mechanisms |
| Cisco Wireless Architecture | - Wireless LAN Controller (WLC) concepts - Lightweight Access Point (LAP) operation |
| Wireless Deployment and Design | - Channel planning and interference mitigation - Site survey and RF planning |
| Troubleshooting and Monitoring | - Performance monitoring and diagnostics - Wireless connectivity troubleshooting |
>> Reliable 350-101 Test Objectives <<
Cisco 350-101 practice test software is compatible with windows and the web-based software will work on these operating systems: Android, IOS, Windows, and Linux. Chrome, Opera, Internet Explorer, Microsoft Edge, and Firefox also support the web-based 350-101 Practice Test software.
NEW QUESTION # 32
What is a characteristic of 20 MHz channel width in a wireless network?
Answer: D
Explanation:
In wireless networks, the 20 MHz channel width is the standard and narrowest channel allocation in the 2.4 GHz frequency band. Using narrower channels reduces adjacent-channel interference and allows for better coexistence in high-density environments, which is particularly important in the crowded 2.4 GHz spectrum. A 20 MHz channel uses less RF bandwidth than 40 MHz or 80 MHz channels, providing more non-overlapping channels (channels 1, 6, and 11 in 2.4 GHz) to reduce co- channel interference.
NEW QUESTION # 33
Refer to the exhibit. A Cisco 9800 WLC is deployed at a branch location to facilitate secure client connectivity. A network engineer configures a WLAN using WPA2 Enterprise authentication and activates the RADIUS server-based method to align with company security policies. Which CLI command must be added to the box in the configuration to enable client authentication for this WLAN?
Answer: C
Explanation:
The correct command is security dot1x authentication-list RADIUS_AUTH_LIST. On a Catalyst
9800 WLC, the WLAN configuration must bind the WLAN's 802.1X authentication process to an AAA authentication method list. Cisco's Catalyst 9800 802.1X configuration workflow shows the WLAN entered with wlan <profile-name> <wlan-id> <ssid-name>, followed by the command security dot1x authentication-list <dot1x-list-name>. Cisco configuration guide examples also show the same syntax under WLAN configuration mode as Device(config-wlan)# security dot1x authentication-list auth-list- name.
In the exhibit, security wpa akm dot1x enables 802.1X as the key-management method, while security wpa wpa2 and security wpa wpa2 ciphers aes establish WPA2/AES security. These statements define the WLAN security framework, but they do not identify which AAA method list will be used to reach the RADIUS backend. The missing command must therefore attach the named authentication list RADIUS_AUTH_LIST to dot1x authentication. Options A, B, and C are parser-invalid or incorrectly ordered IOS XE syntax.
NEW QUESTION # 34
How does U-NII-1 operate with regards to the common frequency bands supported in enterprise wireless networks?
Answer: C
Explanation:
U-NII-1 (Unlicensed National Information Infrastructure-1) is a segment of the 5 GHz band commonly used in enterprise wireless deployments. It is specifically designated for indoor use to help minimize interference with other devices and reduce regulatory conflicts. U-NII-1 operates in the lower 5 GHz range (5.150?.250 GHz in the U.S.) and imposes power and indoor restrictions, which prevents outdoor deployment that could interfere with radar and other critical communications. This band supports 802.11a/n/ac/ax Wi-Fi clients, providing multiple non- overlapping channels that facilitate high-density enterprise deployments. By restricting usage to indoor environments, U-NII-1 helps maintain predictable coverage and mitigates interference from outdoor sources, making it ideal for office and campus environments where controlled radio propagation is critical. The access points and wireless controllers dynamically handle channel assignment and power levels to ensure efficient spectrum usage while conforming to these regulatory limitations. Option C accurately reflects these operational parameters by highlighting indoor restriction and interference minimization, whereas the other options mischaracterize the frequency range, power, or permitted use.
NEW QUESTION # 35
An engineer troubleshooting AP join failures notices DTLS negotiation errors between APs and the controller. Which issue is MOST likely responsible?
Answer: A
Explanation:
DTLS relies on valid certificates and accurate time synchronization. Significant clock mismatches or certificate validation problems frequently prevent secure CAPWAP tunnels from forming between APs and controllers. RF profiles and multicast conditions generally do not affect DTLS establishment directly.
NEW QUESTION # 36
A network engineer must isolate all guest users connected to the WLAN on a Cisco 9800 WLC so they cannot communicate with each other but can access the internet. The WLAN must meet these requirements:
*SSID named VisitorAccess assigned to VLAN 30
*guests prohibited from sharing files with other guests
*must be scalable to multiple access points in the building
Which action must the network engineer take to meet the requirements?
Answer: D
Explanation:
The requirement is guest client isolation, not merely guest authentication or internet breakout. On a Catalyst
9800 WLC, peer-to-peer blocking is the correct control because it prevents wireless clients associated to the same WLAN from communicating directly with one another. Cisco defines peer-to-peer blocking as a WLAN security feature applied to individual WLANs, where each client inherits the WLAN's P2P blocking behavior, and traffic can be bridged locally, dropped, or forwarded upstream. For this scenario, the appropriate action is thedropbehavior, because guest-to-guest file sharing must be prohibited while upstream internet access remains available.
The dedicated guest VLAN, VLAN 30, provides traffic segmentation from production networks and creates a clean policy boundary for VisitorAccess. Cisco's Catalyst 9800 configuration model maps WLANs to policy profiles, and the policy profile defines client network and switching policy, including VLAN association.
Options B, C, and D do not solve client isolation: local authentication validates users, FlexConnect/local switching changes traffic forwarding behavior, and multicast/RADIUS does not block unicast guest-to-guest traffic. Reference topics:Client Connectivity Configuration - guest WLAN design, P2P blocking, VLAN segmentation, and Catalyst 9800 WLAN-to-policy mapping.
NEW QUESTION # 37
......
Our products are the accumulation of professional knowledge worthy practicing and remembering. There are so many specialists who join together and contribute to the success of our 350-101 guide quiz just for your needs. Our responsible and patient staff who has being trained strictly before get down to business and interact with customers. Once you have practiced and experienced the quality of our 350-101 Exam Preparation, you will remember the serviceability and usefulness of them. It explains why our 350-101 practice materials helped over 98 percent of exam candidates get the certificate you dream of successfully. Believe me you can get it too.
350-101 Valid Exam Sims: https://www.examcost.com/350-101-practice-exam.html
P.S. Free 2026 Cisco 350-101 dumps are available on Google Drive shared by ExamCost: https://drive.google.com/open?id=1n988-HcWKDNmAkeDNtMV_0M5RRMBQLPp