Since inception, our company has been working on the preparation of H35-581_V2.0 learning guide, and now has successfully helped tens of thousands of candidates around the world to pass the exam. As a member of the group who are about to take the H35-581_V2.0 Exam, are you worried about the difficulties in preparing for the exam? Maybe this problem can be solved today, if you are willing to spend a few minutes to try our H35-581_V2.0 actual exam.
Huawei H35-581_V2.0 (HCIP-5G-RNP&RNO V2.0) Certification Exam is a comprehensive exam that covers a wide range of topics related to 5G RAN and RNO solutions. H35-581_V2.0 exam consists of multiple-choice questions and requires candidates to demonstrate their understanding of the concepts and principles of 5G technologies. H35-581_V2.0 Exam is conducted online and can be taken at any time.
>> Latest H35-581_V2.0 Exam Labs <<
The three formats of Huawei H35-581_V2.0 practice material that we have discussed above are created after receiving feedback from thousands of professionals around the world. You can instantly download the Huawei H35-581_V2.0 Real Questions of the Itcertmaster right after the payment. We also offer our clients free demo version to evaluate the of our HCIP-5G-RNP&RNO V2.0 (H35-581_V2.0) valid exam dumps before purchasing.
The Huawei H35-581_V2.0 exam covers a range of topics, including 5G network planning and optimization, 5G network architecture and protocols, 5G network deployment and maintenance, and 5G network security. It is a comprehensive exam that requires an in-depth understanding of 5G technology and its applications. With the Huawei H35-581_V2.0 Certification, individuals can demonstrate their expertise in 5G technologies, which is becoming increasingly important as the world moves towards the widespread adoption of 5G networks.
NEW QUESTION # 60
Which of the following layers is responsible for concatenating RLC PDUs?
Answer: A
Explanation:
The Medium Access Control (MAC) layer is responsible for multiplexing multiple RLC PDUs into a MAC PDU for transmission over the physical transport channel.
In the 5G NR protocol architecture, the Radio Link Control (RLC) layer processes data received from upper protocol layers and constructs RLC PDUs.
RLC supports segmentation and reassembly of RLC Service Data Units (SDUs), depending on the configured RLC operating mode.
However, the NR RLC layer does not perform concatenation of multiple independent RLC SDUs into one RLC PDU in the manner associated with earlier LTE RLC processing.
Instead, each RLC SDU is used to construct an RLC PDU, or is segmented into multiple RLC PDUs when necessary.
These RLC PDUs are subsequently delivered to the MAC layer.
From the MAC perspective, an RLC PDU is received as a MAC SDU. The MAC multiplexing procedure can combine MAC SDUs belonging to one or several logical channels into a single MAC PDU.
The MAC PDU is then transferred to the physical layer through the corresponding transport channel.
PDCP performs functions such as sequence numbering, ciphering, and header compression where applicable.
PHY performs physical-channel processing, modulation, and transmission.
Therefore, option C correctly identifies the layer responsible for combining multiple RLC PDUs for transmission.
Official Reference: 3GPP TS 38.321, Section 4.4, MAC Functions ; TS 38.322, Sections 4.2 and 5, RLC Sublayer and Data Transfer Procedures .
NEW QUESTION # 61
After a UE has accessed an LTE network, which of the following conditions must be satisfied for the eNodeB to send 5G B1 measurement configuration messages?
Select All that Apply
Answer: A,B,D
Explanation:
Options A, B, and C describe the principal eligibility and configuration requirements for initiating NR inter- RAT measurements in an E-UTRA-NR Dual Connectivity (EN-DC) deployment.
In NSA architecture, the LTE eNodeB operates as the Master Node and controls the initial measurement and secondary-node addition procedures.
Option A: The core network must permit the UE to use the applicable dual-connectivity service. Subscription restrictions and network indications can prevent the eNodeB from enabling NR secondary connectivity.
Option B: The UE must report capabilities compatible with EN-DC operation. The relevant capability framework was introduced in 3GPP Release 15, although the precise supported band combinations and EN- DC capability fields determine actual eligibility.
Option C: The LTE network must have the necessary dual-connectivity functionality enabled, together with appropriate neighboring NR frequency and measurement configurations. Incorrect frequency information can prevent the UE from measuring the intended NR cells.
Option D: The UMPTa is a Huawei hardware-board designation. The standardized B1 measurement configuration procedure does not require this specific board model. Hardware compatibility depends on the actual Huawei product and software release.
Therefore, A, B, and C represent the intended operational conditions, while D incorrectly introduces a specific hardware model as a universal requirement.
Official Reference: 3GPP TS 37.340, E-UTRA and NR Multi-Connectivity , EN-DC Architecture and Secondary Node Addition; TS 36.331, Inter-RAT Measurement Configuration .
Technical warning / qualification: The precise Huawei NSA feature-switch and board-compatibility conditions require the relevant equipment-version documentation; 3GPP establishes the general signaling requirements.
NEW QUESTION # 62
Which of the following modules assigns QFIs during PDU session establishment?
Answer: A
Explanation:
The Session Management Function (SMF) is responsible for controlling QoS flows within a PDU session and allocating the associated QoS Flow Identifiers (QFIs).
In the 5G QoS architecture, a QoS flow is the smallest unit of QoS differentiation within a PDU session.
Each QoS flow is identified by a QFI, which is unique within the scope of that PDU session.
The SMF manages the establishment, modification, and release of QoS flows according to subscription information, policy decisions, and service requirements.
During PDU session establishment, the SMF determines the applicable QoS configuration and provides QoS- related information to the User Equipment (UE), access network, and User Plane Function (UPF).
The assigned QFI allows packets belonging to the same QoS flow to receive the appropriate forwarding treatment.
The UPF applies packet detection, forwarding, and QoS enforcement rules supplied through session management procedures, but it does not serve as the principal QFI allocation function.
The AMF manages access and mobility signaling and transports relevant session-management signaling between the UE and SMF.
The UDM supplies subscription and user-related data.
Although QFIs may be dynamically assigned or derived from standardized QoS identifiers in applicable configurations, QoS-flow control remains an SMF responsibility.
Therefore, option B is correct.
Official Reference: 3GPP TS 23.501, Sections 5.7.1.1 and 6.2.2, QoS Flow and Session Management Function .
NEW QUESTION # 63
What is the broadcast periodicity of the MIB in 5G?
Answer: C
Explanation:
The NR Master Information Block (MIB) has a nominal broadcast scheduling periodicity of 80 milliseconds, with repetitions transmitted within the applicable MIB scheduling period.
The MIB is an essential component of 5G NR system-information acquisition. It is carried on the Broadcast Channel (BCH), physically transmitted through the Physical Broadcast Channel (PBCH) within a Synchronization Signal/PBCH Block (SSB).
The MIB contains information required for the UE to acquire System Information Block 1 (SIB1), including essential system-frame and control-channel configuration parameters.
Its information elements include the system frame number components, subcarrier spacing indication, SSB subcarrier offset, and parameters associated with the initial PDCCH configuration.
A distinction must be made between the MIB's nominal 80 ms scheduling periodicity and the repetition periodicity associated with SSB transmission.
An SSB burst may repeat at intervals such as 5, 10, 20, 40, 80, or 160 ms, depending on the applicable configuration and operating procedure.
For typical deployments, the UE may therefore receive repeated PBCH transmissions more frequently than every 80 ms.
The question concerns the standardized nominal MIB scheduling period rather than the interval between every PBCH transmission.
Therefore, 80 ms is the correct answer.
Official Reference: 3GPP TS 38.331, Section 5.2.1.2, System Information Scheduling ; TS 38.212, Section
7.1, Broadcast Channel .
NEW QUESTION # 64
Which of the following timers is specific to 5G networks?
Answer: A
Explanation:
T319 is the correct answer because it is defined in the 5G New Radio (NR) Radio Resource Control (RRC) specification to supervise the RRC connection resume procedure.
5G NR supports three principal RRC states: RRC_IDLE, RRC_CONNECTED, and RRC_INACTIVE. The RRC_INACTIVE state allows a UE to retain its Access Stratum (AS) context while reducing signaling overhead and power consumption.
When a UE in RRC_INACTIVE needs to resume communication, it initiates the RRC connection resume procedure by transmitting an RRCResumeRequest or RRCResumeRequest1 message. Timer T319 supervises this procedure.
If the UE receives an appropriate RRCResume message, T319 is stopped, and the UE restores the relevant radio-bearer configuration and transitions to RRC_CONNECTED.
If T319 expires before successful completion, the UE performs RRC resume failure handling and enters RRC_IDLE.
The remaining timers are also present in LTE:
T300: Supervises RRC connection establishment.
T310: Supports radio-link failure detection.
T311: Supervises cell selection during RRC connection reestablishment.
Therefore, among the listed options, T319 is specifically associated with the NR RRC connection resume procedure.
Official Reference: 3GPP TS 38.331, Sections 5.3.13.3-5.3.13.5, RRC Connection Resume , and Section
7.1.1, RRC Timers .
NEW QUESTION # 65
......
H35-581_V2.0 Study Materials Review: https://www.itcertmaster.com/H35-581_V2.0.html