참고: Pass4Test에서 Google Drive로 공유하는 무료 2026 CWNP CWNA-109 시험 문제집이 있습니다: https://drive.google.com/open?id=14M_PzTWoSdIZbf70BjY3DKYKCkESse53
우리 Pass4Test 에는 최신의CWNP CWNA-109학습가이드가 있습니다. Pass4Test의 부지런한 IT전문가들이 자기만의 지식과 끊임없는 노력과 경험으로 최고의CWNP CWNA-109합습자료로CWNP CWNA-109인증시험을 응시하실 수 있습니다.CWNP CWNA-109인증시험은 IT업계에서의 비중은 아주 큽니다. 시험신청하시는분들도 많아지고 또 많은 분들이 우리Pass4Test의CWNP CWNA-109자료로 시험을 패스했습니다. 이미 패스한 분들의 리뷰로 우리Pass4Test의 제품의 중요함과 정확함을 증명하였습니다.
| Certification Vendor: | CWNP |
|---|---|
| Exam Name: | CWNP Wireless Network Administrator (CWNA) |
| Exam Number: | CWNA-109 |
| Exam Duration: | 90 minutes |
| Related Certifications: | CWNE CWAP CWDP CWSP |
| Exam Format: | Multiple Answer, Multiple Choice |
| Passing Score: | 70% |
| Real Exam Qty: | 60 |
| Available Languages: | English |
| Certificate Validity Period: | 3 years |
| Exam Price: | $274.99 USD |
| Recommended Training: | CWNA-109 Official Study Guide CWNA-109 eLearning Course |
| Exam Registration: | Prometric Testing Centers CWNP Official Registration |
| Sample Questions: | CWNP CWNA-109 Sample Questions |
| Exam Way: | Online remote proctored or in-person at Prometric testing centers |
| Pre Condition: | No formal prerequisites; basic networking knowledge recommended |
| Official Syllabus URL: | https://www.cwnp.com/certifications/cwna |
Pass4Test의 CWNP인증 CWNA-109덤프를 구매하여 공부한지 일주일만에 바로 시험을 보았는데 고득점으로 시험을 패스했습니다.이는Pass4Test의 CWNP인증 CWNA-109덤프를 구매한 분이 전해온 희소식입니다. 다른 자료 필요없이 단지 저희CWNP인증 CWNA-109덤프로 이렇게 어려운 시험을 일주일만에 패스하고 자격증을 취득할수 있습니다.덤프가격도 다른 사이트보다 만만하여 부담없이 덤프마련이 가능합니다.구매전 무료샘플을 다운받아 보시면 믿음을 느낄것입니다.
| 주제 | 소개 |
|---|---|
| 주제 1 |
|
| 주제 2 |
|
| 주제 3 |
|
| 주제 4 |
|
질문 # 62
Return Loss is the decrease of forward energy in a system when some of the power is being reflected back toward the transmitter. What will cause high return loss in an RF transmission system, including the radio, cables, connectors and antenna?
정답：B
설명：
Return loss is a measure of how well the components of an RF system are matched in terms of their impedance. Impedance is the opposition to the flow of alternating current in a circuit, and it depends on the frequency, resistance, capacitance, and inductance of the components. When the impedance of the source, the transmission line, and the load are not equal, some of the power is reflected back to the source, causing a loss of forward power. This loss is expressed in decibels (dB) as return loss. The higher the return loss, the lower the reflection and the better the impedance matching. Conversely, the lower the return loss, the higher the reflection and the worse the impedance matching.
VSWR (Voltage Standing Wave Ratio) is another way of expressing the same concept. It is the ratio of the maximum voltage to the minimum voltage along a transmission line due to the interference of the incident and reflected waves. A VSWR of 1:1 means that there is no reflection and perfect impedance matching. A VSWR higher than 1:1 means that there is some reflection and impedance mismatch. The higher the VSWR, the higher the reflection and the lower the return loss.
Therefore, a significant impedance mismatch between components in an RF system will cause high reflection, high VSWR, and low return loss.
질문 # 63
Three access points are used within a facility. One access point is on channel 11 and the other two are on channel 1. The two access points using channel 1 are on either side of the access point using channel 11 and sufficiently apart so that they do not interfere with each other when they transmit frames. Assuming no other APs are in the vicinity, is CCI still a possibility in this network and why?
정답：C
설명：
CCI is still a possibility in this network because the client devices connected to one of the channel 1 APs will transmit frames that reach the other channel 1 AP as well as clients connected to the other channel 1 AP. CCI stands for co-channel interference, which is a type of interference that occurs when two or more devices transmit on the same channel within range of each other. CCI reduces performance and capacity because it causes contention and collisions on the wireless medium, which leads to retransmissions and delays. CCI can be mitigated by increasing physical separation between devices using the same channel or by reducing transmit power levels to limit coverage area. In this scenario, three access points are used within a facility.
One access point is on channel 11 and the other two are on channel 1. The two access points using channel 1 are on either side of the access point using channel 11 and sufficiently apart so that they do not interfere with each other when they transmit frames. However, this does not prevent CCI from occurring between their client devices that are connected on channel 1. For example, if a client device connected to one of the channel
1 APs sends a frame to another device on the wired network or on another wireless network (such as an Internet server or a VoIP phone), that frame will be heard by both channel 1 APs as well as any other client devices connected to either of them on channel 1. This will cause CCI because these devices will have to wait for the channel to be clear before they can transmit their own frames. The answer that CCI only occurs in the
5 GHz frequency band is incorrect; CCI can occur in any frequency band where devices use the same channel.
The answer that channel 11 loops around and causes CCI with channel 1 is also incorrect; channel 11 does not loop around and it operates in a different frequency band than channel 1. References: CWNA-109 Study Guide, Chapter 5: Radio Frequency Signal and Antenna Concepts, page 147
질문 # 64
What can an impedance mismatch in the RF cables and connectors cause?
정답：D
설명：
VSWR stands for Voltage Standing Wave Ratio, which is a measure of how well the impedance of the RF cable and connectors matches the impedance of the transmitter and the antenna. Impedance is the opposition to the flow of alternating current in an RF circuit, and it depends on the frequency, resistance, capacitance, and inductance of the components. A perfect impedance match would have a VSWR of 1:1, meaning that all the power is transferred from the transmitter to the antenna, and none is reflected back. However, in reality, there is always some degree of mismatch, which causes some power to be reflected back to the transmitter, creating standing waves along the cable. This reduces the efficiency and performance of the wireless system, and can also damage the transmitter. Excessive VSWR can be caused by using poor quality or damaged cables and connectors, or by using components that have different impedance ratings123. References: CWNA-
109 Study Guide, Chapter 2: Radio Frequency Fundamentals, page 90; CWNA-109 Study Guide, Chapter 2:
Radio Frequency Fundamentals, page 86; CWNP website, CWNA Certification.
질문 # 65
You are troubleshooting a controller-based AP that is unable to locate the controller. DHCP is not use and the controller is located at 10.10.10.81/24 while the AP is on the 10.10.16.0/24 network. What should be inspected to verify proper configuration?
정답：C
설명：
What should be inspected to verify proper configuration is DNS. DNS stands for Domain Name System and is a service that resolves hostnames to IP addresses. In a controller-based AP deployment, DNS can be used to help the AP locate the controller by using a predefined hostname such as CISCO-CAPWAP-CONTROLLER or aruba-master. The AP sends a DNS query for this hostname and receives an IP address of the controller as a response. Therefore, if DNS is not configured properly or if there is no DNS entry for the controller hostname, the AP may not be able to locate the controller. NTP, BOOTP, and AP hosts file are not relevant for this scenario. References: [CWNP Certified Wireless Network Administrator Official Study Guide:
ExamCWNA-109], page 374; [CWNA: Certified Wireless Network Administrator Official Study Guide:
ExamCWNA-109], page 364.
질문 # 66
What cipher suite is specified by the 802.11-2016 standard and is not deprecated?
정답：C
설명：
The cipher suite specified by the 802.11-2016 standard and is not deprecated is Counter Mode with CBC-MAC Protocol (CCMP). CCMP is an encryption protocol that uses Advanced Encryption Standard (AES) as the underlying cipher and provides confidentiality, integrity, and origin authentication for wireless data. CCMP is the mandatory encryption protocol for WPA2 and WPA3. References: [CWNP Certified Wireless Network Administrator Official Study Guide: ExamCWNA-109], page 295; [IEEE Standard for Information technology-Telecommunications and information exchange between systems Local and metropolitan area networks-Specific requirements - Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications], page 1560.
질문 # 67
......
CWNA-109퍼펙트 덤프자료: https://www.pass4test.net/CWNA-109.html
2026 Pass4Test 최신 CWNA-109 PDF 버전 시험 문제집과 CWNA-109 시험 문제 및 답변 무료 공유: https://drive.google.com/open?id=14M_PzTWoSdIZbf70BjY3DKYKCkESse53