SRAN-Radio-Network-Performance-Optimization資格トレーリング、SRAN-Radio-Network-Performance-Optimization全真模擬試験

完全版を購入する前に、SRAN-Radio-Network-Performance-Optimization練習問題ダウンロードの無料PDFデモを提供しています。購入後、SRAN-Radio-Network-Performance-Optimization学習教材で1年間の無料アップデートと1年間のカスタマーサービスを提供します。また、SRAN-Radio-Network-Performance-Optimizationトレーニングブレインダンプで「パス保証」をお約束します。私たちの目的は、合格率を最高100%にすることであり、顧客満足度の比率も100%です。有効なSRAN-Radio-Network-Performance-Optimization準備資料をお探しの場合は、お気軽に私たちを選んでください。

Nokia SRAN-Radio-Network-Performance-Optimization Exam Syllabus Topics:

SectionWeightObjectives
Topic 1: Mobility and Handover Optimization20%- Handover parameters and algorithms
- Inter-RAT mobility and optimization
- Mobility robustness and optimization
Topic 2: Coverage and Capacity Optimization30%- Coverage analysis, tuning and optimization
- Capacity planning, load balancing and optimization
- Interference analysis and mitigation techniques
Topic 3: Advanced Optimization and SON Features10%- Energy saving and advanced features
- Self-Organizing Networks (SON) use cases and optimization
Topic 4: SRAN Performance Optimization Fundamentals25%- Performance optimization principles and methodology
- Network performance monitoring and analysis tools
- Key performance indicators (KPIs) definition and measurement
Topic 5: Quality of Service and Resource Management15%- QoS parameters, scheduling and admission control
- Radio resource management and optimization

>> SRAN-Radio-Network-Performance-Optimization資格トレーリング <<

SRAN-Radio-Network-Performance-Optimization全真模擬試験、SRAN-Radio-Network-Performance-Optimization勉強時間

我々Topexamはお客様の立場でお客様に最高のサービスを提供します。全日でのオンライン係員、NokiaのSRAN-Radio-Network-Performance-Optimization試験資料のデモ、豊富なバーション、NokiaのSRAN-Radio-Network-Performance-Optimization試験資料を購入した後の無料更新、試験に失敗した後の全額の返金…これら全部は我々Topexamが信頼される理由です。あなたは我々のソフトを通してNokiaのSRAN-Radio-Network-Performance-Optimization試験に順調に合格したら、私たちの共同の努力を覚えられると希望します。

Nokia MN: NCSS NPS - SRAN Radio Network Performance Optimization Certification Exam | GS40-NPS-SRPER-E-S03-2510 認定 SRAN-Radio-Network-Performance-Optimization 試験問題 (Q31-Q36):

質問 # 31
At which mark are all conditions fulfilled for energy saving , so the cell will be switched off? Refer to the image below.

正解:C

解説:
The correct answer is B , which corresponds to mark C in the diagram.
In the diagram, the energy-saving process follows these stages:
Before mark B , the cell is entering the power-saving period, but the required load condition has not yet been satisfied for the required duration.
At mark B , the measured load has gone below the configured threshold, but the cell is not switched off immediately. The system must confirm that the load remains below the required threshold for the configured time.
At mark C , the load has stayed below the required threshold for the required duration, shown as 5 minutes in the diagram. At this point, all conditions are fulfilled, and the cell can be switched off. The diagram also shows the state becoming:
energySavingState = energySaving
Marks D and E are already inside or near the later part of the power-saving period. Mark E is associated with operator suspension/exit behavior, not the initial moment when all switch-off conditions are first fulfilled.


質問 # 32
In the case of 5G SA, which of the following triggers the Radio Link Failure, or RLF, handling mechanism?

正解:A

解説:
The correct answer is C.
In 5G SA, Radio Link Failure handling is mainly UE-driven. The UE monitors the radio link quality using lower-layer indications such as in-sync and out-of-sync indications. If the UE receives enough out-of-sync indications, it starts the relevant RLF timer, commonly associated with T310 behavior. If the link does not recover before the timer expires, the UE declares Radio Link Failure and starts recovery, such as RRC re- establishment.
The gNodeB can detect uplink problems and may release or reconfigure the UE, but the classical RLF handling mechanism is triggered at the UE side.
So the correct answer is:
UE indication timer only.


質問 # 33
In the context of mmWave deployments , what is the primary benefit of analog beamforming ?

正解:D

解説:
The correct answer is A .
In mmWave systems, beamforming is essential because FR2 signals suffer from high path loss and blockage.
Analog beamforming uses fewer RF chains than fully digital beamforming, so it is cheaper and less complex in terms of RF hardware, power consumption, and implementation. Research and industry references explain that analog and hybrid beamforming architectures reduce the number of required ADCs/RF chains compared with fully digital beamforming, lowering cost and power complexity.
However, analog beamforming has limitations. It usually forms one beam, or a limited number of beams, at a time from a panel. Supporting multiple independent simultaneous beams and more UEs per sector is more associated with digital or hybrid beamforming, not pure analog beamforming.
Therefore, the primary benefit is:
Low cost and low complexity for coverage at higher mmWave bands.


質問 # 34
In NR SA Option 2, the UE is camped on an SA serving cell. An IRAT handover is triggered for a multi-QCI call, QCI 1 and QCI 6, due to weak coverage of the serving cell. What will happen to both QCIs during the IRAT handover toward LTE?

正解:B

解説:
The correct answer is D.
In 5G SA Option 2, NR works independently with the 5G Core, but interworking with LTE/EPC can be supported for mobility continuity. When IRAT handover toward LTE is triggered due to weak NR coverage, the goal is to preserve the active services during mobility.
For a multi-QCI service:
QCI 1 normally represents the voice bearer, such as VoLTE/IMS voice continuity after movement to LTE.
QCI 6 normally represents a non-GBR data bearer.
During a supported IRAT handover from NR SA to LTE, both the voice bearer and data bearer can be transferred to LTE, assuming proper interworking, bearer mapping, and LTE coverage availability.
Option C is incorrect because IRAT mobility from NR SA to LTE is supported in properly configured networks. Option A is incorrect because the voice bearer is the most critical bearer to preserve. Option B is also not the best answer because the data bearer does not necessarily need to be released during IRAT handover.
Therefore, the expected result is:
Both QCI 1 voice and QCI 6 data continue on LTE.


質問 # 35
The slice type SST value for Extreme Broadband is typically:

正解:D

解説:
The correct answer is B .
In 5G network slicing, SST means Slice/Service Type . It identifies the high-level service category of a network slice.
Typical standardized SST values are:
SST = 1 # eMBB, enhanced Mobile Broadband
SST = 2 # URLLC, Ultra-Reliable Low-Latency Communication
SST = 3 # MIoT/mMTC, Massive IoT or massive Machine Type Communication
SST = 4 # V2X-related slice type
"Extreme Broadband" is normally aligned with eMBB , because it refers to high data rate, high capacity, and broadband user experience.
Therefore, the SST value for Extreme Broadband is:
1.


質問 # 36
......

今日、知識は精神労働よりも多くの富を生み出すことができるため、知識能力と精神労働は肉体労働よりも価値があります。ある分野で専門知識の能力を高めれば、多くの価値を生み出し、高収入で良い仕事を得ることができます。 SRAN-Radio-Network-Performance-Optimization認定試験に合格すると、その達成に役立ちます。SRAN-Radio-Network-Performance-Optimizationトレーニング資料は、SRAN-Radio-Network-Performance-Optimizationテストの準備に最適な学習資料です。 SRAN-Radio-Network-Performance-Optimizationガイド資料では、重要な情報を組み合わせて、クライアントが基盤を固め、時代とともに前進するのを支援します。

SRAN-Radio-Network-Performance-Optimization全真模擬試験: https://www.topexam.jp/SRAN-Radio-Network-Performance-Optimization_shiken.html