What's more, part of that ExamDiscuss H12-891_V1.0 dumps now are free: https://drive.google.com/open?id=1Jz_wvNMJo-vCrAjCldjP3HCV_CqS9MT3
Most of our clients found our H12-891_V1.0 exam questions and answers amazing. All they learned from ExamDiscuss is that the Huawei H12-891_V1.0 practice test questions were accurately similar to the actual questions they faced on their HCIE-Datacom V1.0 exam. It made them utterly confident to go through the whole process of the HCIE-Datacom V1.0.Feel free to compare our quality of Huawei H12-891_V1.0 Exam Questions dumps with other courses. Nothing can help people pass their Huawei H12-891_V1.0 certification exam more than we do. Even people who were on their first time taking Huawei Target H12-891_V1.0 certification can pass their HCIE-Datacom V1.0 exam with ExamDiscuss's help.
| Section | Objectives |
|---|---|
| Topic 1: Routing and Switching Technologies | - IP routing protocols
|
| Topic 2: Data Center and Virtualization Technologies | - VXLAN and overlay networks
|
| Topic 3: Network Automation and Programmability | - SDN and automation
|
| Topic 4: WAN and VPN Technologies | - MPLS fundamentals
|
| Topic 5: Enterprise Network Architecture | - Network design principles
|
| Topic 6: IPv6 and Advanced IP Technologies | - IPv6 deployment
|
| Topic 7: Network Security and QoS | - QoS mechanisms
|
>> H12-891_V1.0 Valid Test Answers <<
There may be a lot of people feel that the preparation process for exams is hard and boring, and hard work does not necessarily mean good results, which is an important reason why many people are afraid of examinations. Today, our H12-891_V1.0 study materials will radically change this. High question hit rate makes you no longer aimless when preparing for the exam, so you just should review according to the content of our H12-891_V1.0 Study Materials prepared for you. Instant answer feedback allows you to identify your vulnerabilities in a timely manner, so as to make up for your weaknesses.
NEW QUESTION # 321
/ifm/interfaces/interface in Huawei Open Programmability System (OPS) is the URL used to identify a device's managed object.
Answer: B
Explanation:
Comprehensive and Detailed In-Depth Explanation:
InHuawei Open Programmability System (OPS), theURL structureis used to specify managed objects in a standardized way.
The URL path/ifm/interfaces/interfaceis used inNETCONF/YANG-based APIsto representinterface-related dataon a device.
This path allows users toquery, configure, or manage network interfacesthrough programmatic means.
TheIFM (Interface Management)model is commonly used for managing network interfaces, and this URL path correctly follows the convention.
Therefore, the statement isTRUE.
NEW QUESTION # 322
Regarding BGP's recognized arbitrary attributes, which of the following descriptions is correct?
Answer: B,D
NEW QUESTION # 323
Node segments in SR-MPLS must be manually configured.
Answer: B
Explanation:
Node segments in SR-MPLS (Segment Routing over MPLS) are typically automatically generated and distributed via IGP protocols (such as IS-IS or OSPF) using SR extensions. There is no need to manually configure node segments on every router.
Exact Extract - Huawei HCIE-Datacom Study Guide - Segment Routing:
"Node SIDs are automatically generated and advertised by IGPs with SR extensions. Manual configuration is not required except in special cases like adjacency SIDs." Reference:
Huawei SR-MPLS Configuration Guide
HCIE-Datacom v1.0 - Segment Routing (SR-MPLS) Module
NEW QUESTION # 324
OSPF is deployed on a campus network to implement network interconnection. An engineer configures R2 as shown in the figure. Which of the following statements is incorrect about LSAs on the OSPF network?
Answer: B
Explanation:
# Analyze the Configuration:
[R2] acl 2000
[R2-acl-basic-2000] rule deny
[R2] ospf
[R2-ospf-1] area 1
[R2-ospf-1-area-0.0.0.1] filter 2000 import
[R2-ospf-1-area-0.0.0.1] quit
[R2-ospf-1] default-route-advertise always
# Understanding Key Concepts:
Type 3 LSAs (Inter-Area Routes):
Generated by ABRs to advertisesummary routesbetween areas.
Filtering Type 3 LSAsis possible using import filters (like in Area 1).
Type 5 LSAs (External Routes):
Flooded only within the same ASbutdo not enter stub or NSSA areas.
#Breakdown of the Options:
A). Type 5 LSAs are flooded in Area 1##Incorrect
If Area 1 is astub or NSSA, thenType 5 LSAs are not allowed.
Although the diagram does not explicitly say Area 1 is a stub/NSSA,real deployments often use stub areas at the edge (like Area 1).
More importantly,the filter is applied to Area 1, and there isno redistributionof external routes into Area 1 in the config.
Therefore, Type 5 LSAs wouldnot be floodedthere.
B). Type 3 LSAs are not flooded in Area 1##Correct
The command filter 2000 import with ACL rule deny meansType 3 LSAs are filtered from Area 0 into Area 1.
C). Type 3 LSAs are not flooded in Area 2##Correct
There isno filter applied to Area 2, so thiscould be false,butsince the question asks for the incorrect statement, this is not the answer.
D). Type 5 LSAs are flooded in Area 2##Correct
Area 2 is not shown to be stub or NSSA, and there's no filter or restriction configured.
Hence,Type 5 LSAs are allowedandflooded in Area 2.
#Correct answer: A. Type 5 LSAs are flooded in Area 1.
Reference:Huawei HCIE-Datacom V1.0 Study GuideChapter:OSPF Advanced ConfigurationSection:LSA Types and Filtering (Type 3 and Type 5)
NEW QUESTION # 325
In a scenario where SR Policies are dynamically established through the controller, which of the following statements about the SR Policy solution architecture is incorrect?
Answer: B
Explanation:
Comprehensive and Detailed
✔ SR Policies are dynamically computed and delivered by the SDN controller in an SR-MPLS or SRv6 network.
✔ Correct Statements:
✅ (A) NETCONF is used for delivering configurations like routing policies and service interfaces.
✅ (B) BGP-LS (Link-State) is used to collect topology and compute SR Policies.
✅ (D) BGP IPv6 SR Policy distributes SR policy attributes like color, headend, and endpoints.
✔ Why Is (C) Incorrect?
❌ (C) The controller does not use telemetry to deliver SID entries-telemetry is used for real-time monitoring, not path computation.
📖 Reference: Huawei HCIE Datacom - SR Policy and Controller-Based Path Computation
NEW QUESTION # 326
......
In today’s society, many enterprises require their employees to have a professional H12-891_V1.0 certification. It is true that related skills serve as common tools frequently used all over the world, so we can realize that how important an H12-891_V1.0 certification is, also understand the importance of having a good knowledge of it. The rigorous world force us to develop ourselves, thus we can't let the opportunities slip away. Being more suitable for our customers the H12-891_V1.0 Torrent question complied by our company can help you improve your competitiveness in job seeking, and H12-891_V1.0 exam training can help you update with times simultaneously.
H12-891_V1.0 Premium Files: https://www.examdiscuss.com/Huawei/exam/H12-891_V1.0/
BONUS!!! Download part of ExamDiscuss H12-891_V1.0 dumps for free: https://drive.google.com/open?id=1Jz_wvNMJo-vCrAjCldjP3HCV_CqS9MT3