Pass Guaranteed Quiz Juniper - The Best Accurate JN0-364 Answers

DOWNLOAD the newest DumpTorrent JN0-364 PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=1CgTs7rVhUD6jGOFqz582dLRmaPA4gJr7

This is how not only you can make your success certain in the Service Provider Routing and Switching, Specialist (JNCIS-SP) exam in a single attempt but you can also score high marks by properly following Juniper JN0-364 Dumps provided. Now you don't need to collect outdated and irrelevant Juniper JN0-364 dumps from several sources and spend money on expensive books. Because the DumpTorrent follows every bit of the official Service Provider Routing and Switching, Specialist (JNCIS-SP) exam syllabus to compile the most relevant Juniper JN0-364 Pdf Dumps questions and answers with 100% chance of appearing in the actual exam. The Juniper JN0-364 PDF dumps file does not require any installation and is equally suitable for PCs, mobile devices, and tablets.

Juniper JN0-364 Exam Syllabus Topics:

Section	Objectives
Topic 1: Spanning Tree Protocols	- Identify the concepts, operation, or functionality of STP 1. RSTP 2. STP 3. MSTP 4. VSTP - Demonstrate knowledge of how to configure, monitor, or troubleshoot Spanning Tree Protocols 1. RSTP 2. STP 3. MSTP 4. VSTP
Topic 2: Open Shortest Path First (OSPF)	- Identify the concepts, operation, or functionality of OSPF 1. Designated router and backup designated router 2. OSPF packet types 3. Router ID 4. OSPF area and router types 5. Link-state advertisement (LSA) packet type 6. Link-state database 7. Adjacencies and neighbors - Demonstrate knowledge of how to configure, monitor, or troubleshoot OSPF 1. Troubleshooting tools 2. Interfaces and neighbor 3. Routing policy application
Topic 3: IPv6	- Demonstrate knowledge of how to configure, monitor, or troubleshoot IPv6 - Identify the concepts, operation, or functionality of IPv6 1. Static routes 2. Dynamic routing - OSPFv3, IS-IS, BGP 3. IPv6 over IPv4 tunneling
Topic 4: Protocol-Independent Routing	- Demonstrate knowledge of how to configure, monitor, or troubleshoot various protocol-independent routing components 1. Load balancing 2. Static, aggregate, and generated routes 3. Filter-based forwarding - Identify the concepts, operation, or functionality of various protocol-independent routing components 1. Load balancing 2. Static, aggregate, and generated routes 3. Martian addresses 4. Routing instances, including routing information base (RIB) (also known as routing table) group 5. Filter-based forwarding
Topic 5: Multiprotocol Label Switching (MPLS)	- Demonstrate knowledge of how to configure, monitor, or troubleshoot MPLS 1. Shortest path segment-routing LSPs 2. LDP-signaled Label-Switched Paths (LSPs) 3. RSVP-signaled Label-Switched Paths (LSPs) 4. MPLS forwarding - Identify the concepts, operation, or functionality of MPLS CoS processing on Junos devices 1. MPLS packet header 2. MPLS terminology 3. End-to-end packet flow and forwarding 4. MPLS and routing tables 5. Labels and the label information base 6. Segment routing with MPLS 7. LDP 8. RSVP
Topic 6: Layer 2 Bridging or VLANs	- Identify the concepts, operation, or functionality of Layer 2 bridging for the Junos OS 1. Service provider switching platforms 2. Provider bridging (Q-in-Q tunneling) 3. Bridging elements and terminology 4. Frame processing 5. Virtual Switches - Demonstrate knowledge of how to configure, monitor, or troubleshoot Layer 2 bridging or VLANs 1. IRB 2. Interfaces and ports 3. VLANs 4. Provider bridging - Identify the concepts, benefits, or functionality of VLANs 1. Port modes 2. Tagging 3. Integrated Routing and Bridging (IRB)
Topic 7: Border Gateway Protocol (BGP)	- Identify the concepts, operation, or functionality of BGP 1. Attributes 2. BGP basic operation 3. IBGP and EBGP functionality and interaction 4. BGP message types 5. BGP route reflection and confederations 6. Route selection process - Demonstrate knowledge of how to configure, monitor, or troubleshoot BGP 1. Troubleshooting tools 2. Peers and peer groups 3. Routing policy application
Topic 8: Intermediate System to Intermediate System (IS-IS)	- Identify the concepts, operation, or functionality of IS-IS 1. Type, length, values (TLVs) 2. Levels and areas 3. Metrics 4. Link-state database 5. IS-IS protocol data units (PDUs) 6. Adjacencies and neighbors 7. Designated intermediate system (DIS) - Demonstrate knowledge of how to configure, monitor, or troubleshoot IS-IS 1. Troubleshooting tools 2. Interfaces and adjacencies 3. Routing policy application

>> Accurate JN0-364 Answers <<

Updated Juniper JN0-364 Exam Questions BUNDLE PACK

It is known to us that the JN0-364 exam braindumps have dominated the leading position in the global market with the decades of painstaking efforts of our experts and professors. There are many special functions about study materials to help a lot of people to reduce the heavy burdens when they are preparing for the exams. For example, the JN0-364 study practice question from our company can help all customers to make full use of their sporadic time. Just like the old saying goes, time is our product by a good at using sporadic time person, will make achievements. If you can learn to make full use of your sporadic time to preparing for your JN0-364 Exam, you will find that it will be very easy for you to achieve your goal on the exam. Using our study materials, your sporadic time will not be wasted, on the contrary, you will spend your all sporadic time on preparing for your JN0-364 exam.

Juniper Service Provider Routing and Switching, Specialist (JNCIS-SP) Sample Questions (Q115-Q120):

NEW QUESTION # 115
Which two statements are correct when using LDP? (Choose two.)

A. LDP label-switched paths are created by configuring LDP on the loopbacK Interface.
B. The lnet.3 table will contain only the paths explicitly defined.
C. LDP label-switched paths are created by configuring LDP on at least one physical router interface.
D. The inet.3 table will contain a full mesh of label-switched paths to other LDP-enabled routers.

Answer: C,D

Explanation:
With Label Distribution Protocol (LDP), a full mesh of label-switched paths (LSPs) is automatically created between all LDP-enabled routers, and these paths are reflected in the inet.3 table. LDP LSPs are set up when LDP is enabled on interfaces connecting routers in an MPLS network.

NEW QUESTION # 116
You want to see a detailed list of all established BGP sessions. In this scenario, what would be a valid command to accomplish this task?

A. show rouse receive-protocol bgp <neighbor IP address>
B. show bgp neighbor
C. show bgp summary
D. show rouse protocol bgp

Answer: B

Explanation:
The show bgp neighbor command in Junos OS provides a detailed description of each BGP session, including session state, options configured, and counters for messages sent and received. This is the command you would use to see a detailed list of all established BGP sessions.

NEW QUESTION # 117
You have configured graceful RE switchover (GRES), however you cannot complete the show system switchover command.
Referring to the exhibit, what is the problem?

A. The command is only available If a backup router is configured.
B. The command is only available on the backup Routing Engine.
C. The command is only available if non-stop routing is enabled.
D. The command is only available If graceful restart is enabled.

Answer: C

Explanation:
The show system switchover command is used to display the status of the Graceful Routing Engine Switchover (GRES) feature. This command is available when nonstop routing (NSR) is enabled, which works in conjunction with GRES to maintain uninterrupted routing in case of a Routing Engine switchover.

NEW QUESTION # 118
You are asked to add next-hop redundancy using VRRP for an IPv6 enabled service. The configured primary router must always be active when available, and the servers connected to the network must be able to ping their gateway. Which VRRP element is required to accomplish this requirement?

A. The accept-data parameter must be added to the VRRP configuration.
B. Both routers running VRRP will require a static ARP entry to be configured for the VRRP VIP.
C. The backup router requires the track parameter to track the primary router's interface.
D. The preempt parameter must be added to the VRRP configuration.

Answer: A

Explanation:
InVirtual Router Redundancy Protocol (VRRP), the primary goal is to provide a highly available default gateway for end hosts. However, there is a specific operational behavior in the VRRP standard (RFC 3768
/RFC 5798) regarding how the "Virtual Router" responds to traffic destined for its own Virtual IP (VIP).
According to Juniper Networks documentation, by default, a VRRP router that is in the Master state will only respond to packets destined for the VIP if that router is theIP Address Owner(meaning its physical interface IP matches the VIP). If the router is a "non-owner" (a common configuration in many networks), it will forward traffic on behalf of the VIP but will not respond to management traffic, such asICMP Echo Requests (Pings), directed at the VIP itself.
To satisfy the requirement that "servers connected to the network must be able to ping their gateway," the accept-data (Option D)parameter must be configured. In Junos OS, the accept-data statement allows the VRRP Master to respond to traffic destined for the virtual IP address even if it is not the address owner. This includes responding to Pings and allowing other management connections like SSH or Telnet to the VIP.
Regarding the other options:
* Preempt (Option B):While preempt is often used to ensure the primary router regains control, in Junos, a router with the highest priority (255) defaults to preemptive behavior, and accept-data is specifically what solves the "pinging the gateway" requirement.
* Track (Option A):Tracking is used for failover logic but doesn't affect the ability to ping the VIP.
* Static ARP (Option C):This is unnecessary as VRRP uses a virtual MAC address to ensure hosts can resolve the VIP via standard NDP (for IPv6) or ARP (for IPv4).

NEW QUESTION # 119
Which two interface types are used as tunnel endpoints? (Choose two.)

A. ip
B. gr
C. ge
D. ae

Answer: A,B

Explanation:
tunnel-end-point name {
ipv4 {
source-address 10.255.1.1;
destination-address 10.255.2.0/25;
}
gre {
key 9;
}
}
The ip and gr interface types are used as endpoints for various tunneling protocols. ip is a generic term that can refer to any IP-based tunnel, while gr specifically refers to Generic Routing Encapsulation (GRE) tunnel interfaces in Junos.

NEW QUESTION # 120
......

For the challenging Juniper JN0-364 exam, they make an effort to locate reputable and recent Juniper JN0-364 practice questions. The high anxiety and demanding workload the candidate must face being qualified for the Juniper JN0-364 Certification are more difficult than only passing the Juniper JN0-364 exam.

JN0-364 Practice Test Fee: https://www.dumptorrent.com/JN0-364-braindumps-torrent.html

BONUS!!! Download part of DumpTorrent JN0-364 dumps for free: https://drive.google.com/open?id=1CgTs7rVhUD6jGOFqz582dLRmaPA4gJr7