Latest JN0-351 Exam Pass4sure | JN0-351 Detailed Answers

P.S. Free & New JN0-351 dumps are available on Google Drive shared by TestPassed: https://drive.google.com/open?id=1iktQ1ZPR6kHCqw5bT4U9XGWssV7k2MZ6

Research has found that stimulating interest in learning may be the best solution. Therefore, the JN0-351 prepare guide' focus is to reform the rigid and useless memory mode by changing the way in which the JN0-351 exams are prepared. Our Soft version of JN0-351 practice materials combine knowledge with the latest technology to greatly stimulate your learning power. By simulating enjoyable learning scenes and vivid explanations, users will have greater confidence in passing the qualifying JN0-351 exams.

Juniper JN0-351 Exam Syllabus Topics:

Section	Objectives
Layer 3 Routing Fundamentals	- Routing protocols 1. IS-IS basics 2. BGP fundamentals 3. OSPF fundamentals and operations - Routing concepts 1. Protocol-independent routing 2. Route preference and policy
Layer 2 Switching	- VLANs and trunking 1. VLAN configuration and verification 2. 802.1Q tagging - Spanning Tree Protocol (STP/RSTP) 1. Loop prevention mechanisms 2. STP operations and convergence
Layer 2 Security	- Switch security features 1. Storm control 2. MAC limiting
Tunneling Technologies	- IP tunneling 1. IP-IP tunnels 2. GRE tunnels
High Availability	- Redundancy mechanisms 1. BFD 2. VRRP - Junos HA features 1. GRES 2. NSR / NSB 3. Graceful restart

>> Latest JN0-351 Exam Pass4sure <<

JN0-351 Detailed Answers & JN0-351 Boot Camp

The main reason why people look for Juniper JN0-351 practice test is that these help them to prepare for the exam. Even if you study well but with no idea of the Enterprise Routing and Switching, Specialist (JNCIS-ENT) JN0-351 exam pattern, it will be tough to crack the nut. You shall waste your time thinking about the pattern and how to attempt the Enterprise Routing and Switching, Specialist (JNCIS-ENT) JN0-351 Exam Questions. On the other hand, if you know the Enterprise Routing and Switching, Specialist (JNCIS-ENT) JN0-351 exam questions well, you can use that time to solve the queries and improve your chances to score well in the exam.

Juniper Enterprise Routing and Switching, Specialist (JNCIS-ENT) Sample Questions (Q120-Q125):

NEW QUESTION # 120
Which two statements are true about the default VLAN on Juniper switches? (Choose two.)

A. The default VLAN is set to a VLAN ID of 1 by default
B. The default VLAN ID can be changed.
C. The default VLAN ID is not visible.
D. The default VLAN ID is not assigned to any interface.

Answer: A,B

Explanation:
On Juniper switches, the default VLAN is set to a VLAN ID of 1 by default 1 2 . This means that all interfaces on the switch are members of VLAN 1 until they are specifically assigned to another VLAN 1 2 .
Therefore, option A is correct.
The default VLAN ID can be changed 1 2 . This allows network administrators to configure the switch to use a different VLAN as the default, if necessary 1 2 . Therefore, option D is correct.

NEW QUESTION # 121
You are troubleshooting an issue where traffic to 192.168.10.0/24 is being sent to R1 instead of your desired path through R2.
Referring to the exhibit, what is the reason for the problem?

A. R1's route is the best path due to a higher local preference
B. R2's route is not the best path due to loop prevention.
C. R1's route is the best path due to the shorter AS path.
D. R2's route is not the best path due to a lower origin code.

Answer: A

Explanation:
The exhibit shows the output of the command show ip bgp, which displays information about the BGP routes in the routing table. The output shows two routes for the destination 192.168.10.0/24, one from R1 and one from R2.
The route from R1 has a local preference of 200, while the route from R2 has a local preference of 100. Local preference is a BGP attribute that indicates the degree of preference for a route within an autonomous system (AS). A higher local preference means a more preferred route.
BGP uses a best path selection algorithm to choose the best route for each destination among multiple paths. The algorithm compares different attributes of the routes in a specific order of precedence. The first attribute that is compared is weight, which is a Cisco-specific attribute that is local to the router. If the weight is equal or not set, the next attribute that is compared is local preference.
In this case, both routes have the same weight of 0, which means that they are learned from external BGP (eBGP) peers. Therefore, the next attribute that is compared is local preference.
Since R1's route has a higher local preference than R2's route, it is chosen as the best path and installed in the routing table. The other attributes, such as origin code and AS path, are not considered in this case.

NEW QUESTION # 122
Exhibit.

You want to verify prefix information being sent from 10.36.1.4.
Which two statements are correct about the output shown in the exhibit? (Choose two.)

A. The output shows routes that are active and rejected by an import policy.
B. The routes displayed are being learned from an I BGP peer.
C. The output shows routes that were received prior to the application of any BGP import policies.
D. The routes displayed have traversed one or more autonomous systems.

Answer: B,D

Explanation:
A). The routes displayed have traversed one or more autonomous systems. True. The AS path attribute shows AS numbers (e.g., 65401 65520.), indicating the route ' s traversal through various autonomous systems. D.
The routes displayed are being learned from an IBGP peer. True. The absence of the ' * > i ' marker before the prefixes indicates they are being learned from an IBGP peer. Therefore, the correct statements are A. The routes displayed have traversed one or more autonomous systems. and D. The routes displayed are being learned from an IBGP peer.

NEW QUESTION # 123
Which statement correctly describes the function of the Junos OS "family ethernet-switching" configuration on an interface?

A. It configures the interface to operate as a Layer 2 switch port, participating in VLANs.
B. It configures the interface for Layer 3 routing only.
C. It is required only for aggregated Ethernet interfaces.
D. It disables all Layer 2 functionality on the interface.

Answer: A

Explanation:
Configuring "family ethernet-switching" on a Junos OS interface enables Layer 2 switching functionality, allowing the interface to participate as an access or trunk port within one or more VLANs. This is a prerequisite for standard VLAN-based Layer 2 forwarding on EX Series switches.

NEW QUESTION # 124
An EBGP session sources its TCP connection from which IP address?

A. The IP address of the interface that connects the two BGP speakers.
B. The IP address assigned as the router ID.
C. The IP address of the primary address assigned to the loopback interface.
D. The IP address of the preferred address assigned to the loopback interface.

Answer: A

NEW QUESTION # 125
......

The web-based JN0-351 practice test frees you from the need for software installation. It is compatible with all operating systems. The web-based Enterprise Routing and Switching, Specialist (JNCIS-ENT) (JN0-351) practice test of requires no special plugins to function properly. Customization of this format allows you to change settings of JN0-351 Practice Exams. This self-assessment JN0-351 practice exam tracks your progress so you overcome your mistakes.

JN0-351 Detailed Answers: https://www.testpassed.com/JN0-351-still-valid-exam.html

BTW, DOWNLOAD part of TestPassed JN0-351 dumps from Cloud Storage: https://drive.google.com/open?id=1iktQ1ZPR6kHCqw5bT4U9XGWssV7k2MZ6