What's more, part of that Real4test VNX301 dumps now are free: https://drive.google.com/open?id=1RwayHnaMe6gcaVyUtKaOAeFP9e379C8t
Practicing with Versa Networks VNX301 Exam questions will help you to become an expert in and acquire the Versa Networks VNX301. Versa Networks VNX301 Exam Questions allow you to verify your skills as a professional. You have to pass the Versa Networks VNX301 to achieve the associate-level certification.
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
>> Printable Versa Networks VNX301 PDF <<
It is inescapable choice to make why don't you choose our VNX301 practice materials with passing rate up to 98-100 percent. You can have a sweeping through of our VNX301 practice materials with intelligibly and under-stable contents. It is time to take the plunge and you will not feel depressed. All incomprehensible issues will be small problems and all contents will be printed on your minds. So even trifling mistakes can be solved by using our VNX301 practice materials, as well as all careless mistakes you may make.
NEW QUESTION # 21
You are onboarding a branch with one WAN and one LAN interface. After a successful branch activation, the branch is not able to reach the Versa Controller. You realize that the WAN gateway IP address originally entered under the Device Bind Data menu in Versa Director is incorrect. Which action will you perform to solve the problem?
Answer: D
Explanation:
The correct action is to update the WAN gateway IP address in Device Bind Data and onboard the branch appliance again. Device Bind Data supplies site-specific values, such as WAN interface addressing and gateway information, that are merged with the workflow and template configuration during onboarding. If the wrong WAN gateway is entered, the branch may activate successfully from a workflow perspective, but the resulting WAN routing configuration is incorrect. As a result, the branch cannot establish proper transport reachability to the Controller. Versa troubleshooting documentation explains that, after establishing transport connectivity from a branch to a Controller, at least one WAN interface must be available, and the branch then establishes IKE-based IPsec connectivity to the Controller. If that IKE/IPsec connectivity fails, the Controller- facing ptvi interface remains down.
Changing the configuration only from the Appliance context is not the best answer because the incorrect value originated in the bind-data source used for provisioning. Modifying it manually from the branch CLI is also not recommended because the device is managed by Versa Director and template-driven configuration. Resetting the device does not automatically discover or "ping" the correct gateway. The correct remediation is to fix the bind data and repeat onboarding so the branch receives the correct generated configuration.
NEW QUESTION # 22
During branch onboarding, you need to verify whether the Controller has sent branch-connect and branch- disconnect notifications to Versa Director. Which CLI command should be used?
Answer: B
Explanation:
The correct answer is A . Versa troubleshooting documentation states that after a branch device successfully establishes an IPsec connection to the Controller node, the Controller sends a notification to the Director node. To display the details of this notification, the documentation instructs administrators to issue the show alarms CLI command. It also provides examples using show alarms | match branchd | match br101 to view branch-connect and branch-disconnect events.
These alarm entries are valuable during onboarding because they show whether the branch reached the Controller, whether staging progressed, and whether the branch later disconnected. For example, branch lifecycle notifications include factory-default connection, staged connection, Stage 3 connection with WAN IP addresses, and branch disconnect events.
show system storage is useful for disk usage, show interfaces detail helps with link state, speed, duplex, and interface counters, and show cgnat acl info is used for CGNAT matching. None of those commands directly confirms branch lifecycle notifications between Controller and Director.
NEW QUESTION # 23
A business-critical application should remain on the best SLA-compliant circuit. When all SLA-compliant circuits fail, the traffic must be dropped instead of being forwarded on a degraded path. Which forwarding- profile setting should be changed?
Answer: A
Explanation:
The correct answer is A . In Versa SD-WAN traffic steering, forwarding profiles define how traffic is mapped to WAN circuits, how next hops are selected, and how traffic behaves when SLA conditions are violated. If the requirement is to stop traffic when no SLA-compliant path is available, the relevant behavior is the SLA Violation Action . Setting this option to Drop prevents the VOS device from forwarding the matching traffic over a circuit that does not satisfy the policy's SLA requirements.
This is the opposite of using Forward , which allows traffic to continue even when the available next hops violate the SLA. Forward may be appropriate for best-effort applications where degraded delivery is better than no delivery, but it is not appropriate for strict business-critical applications that must not use a degraded path.
Nexthop Failure Action controls how the system behaves when a next hop fails, such as waiting for recovery or re-evaluating. Header compression affects packet overhead, and the recompute timer controls periodic recalculation timing. None of those settings directly enforce "drop when SLA is not met."
NEW QUESTION # 24
Examine the exhibit below.
Referring to the exhibit, which two statements are correct? (Choose two.)
Answer: A,C
Explanation:
The correct answers are A and B . In the exhibit, the LAN interface shows a fixed VLAN ID value of 100 .
Because this value is directly configured in the template rather than represented as a per-device variable, every branch that uses this template will receive the same LAN VLAN ID. This supports option A. Versa configuration examples show that VLAN-tagged interfaces are created by defining logical units with a vlan- id, and organizations then use those tagged interfaces for traffic identification and routing services.
For the MPLS WAN network , the VLAN ID field is shown as a variable or bind-data style value rather than a fixed number. This allows each branch device to receive a different MPLS VLAN ID during onboarding, depending on the branch-specific values supplied in the workflow or device bind data. Therefore, branches can have separate VLAN IDs on the MPLS WAN transport, which supports option B. Versa SD-WAN troubleshooting output also shows WAN interfaces as logical VNI subinterfaces, such as vni-0/1.0 and vni-0/2.
0, mapped to SD-WAN transport networks like INET and MPLS.
Option C is incorrect because an INET interface can be untagged, commonly represented with VLAN ID 0. Option D is incorrect because the MPLS VLAN field is intentionally parameterized, not incorrectly configured.
NEW QUESTION # 25
A VOS branch has two WAN circuits. You suspect the configured transport domain mapping is wrong because one link is not building the expected SD-WAN path. Which VSM control-plane command is most useful to check local WAN circuit information, transport domains, NAT status, and local tunnel-site details?
Answer: B
Explanation:
The correct answer is A . Versa SD-WAN data-path troubleshooting documentation instructs administrators to connect to the VSM control plane with vsh connect vsmd and then use show vsm p2mp local-tunnel-sites 0 to check the status of local site objects. The example output includes the local site key, neighbor IP, site type, site name, branch ID, tenant ID, and detailed WAN link information. It also shows fields such as WAN local VRF ID, WAN local link name, circuit information, link ID, behind-NAT status, shaping rate, public and private addresses, link flags, transport domain, and SLA interval.
This command is therefore highly relevant when validating whether the local SD-WAN site has learned and built the correct WAN transport objects for overlay tunnel creation. If a circuit is mapped to the wrong transport domain or has incorrect NAT/public/private address state, the local-tunnel-site output is one of the best places to confirm it.
The other commands are useful for software version, CGNAT summary, or CPU usage, but they do not show the detailed SD-WAN local tunnel-site transport mapping.
NEW QUESTION # 26
......
About VNX301 exam, Real4test has a great sound quality, will be the most trusted sources. Feedback from the thousands of registration department, a large number of in-depth analysis, we are in a position to determine which supplier will provide you with the latest and the best VNX301 practice questions. The Real4test Versa Networks VNX301 Training Materials are constantly being updated and modified, has the highest Versa Networks VNX301 training experience. If you want to pass the exam, please using our Real4test Versa Networks VNX301 exam training materials. Real4test Versa Networks VNX301 Add to your shopping cart, it will let you see unexpected results.
New VNX301 Practice Questions: https://www.real4test.com/VNX301_real-exam.html
DOWNLOAD the newest Real4test VNX301 PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=1RwayHnaMe6gcaVyUtKaOAeFP9e379C8t