We have installed the most advanced operation system in our company which can assure you the fastest delivery speed, to be specific, you can get immediately our H35-581_V2.0 training materials only within five to ten minutes after purchase after payment. At the same time, your personal information will be encrypted automatically by our operation system as soon as you pressed the payment button, that is to say, there is really no need for you to worry about your personal information if you choose to buy the H35-581_V2.0 Exam Practice from our company. We aim to leave no misgivings to our customers so that they are able to devote themselves fully to their studies on H35-581_V2.0 guide materials: HCIP-5G-RNP&RNO V2.0 and they will find no distraction from us. I suggest that you strike while the iron is hot since time waits for no one.
Huawei H35-581_V2.0 Exam is intended for professionals who have a deep understanding of 5G technology and its associated networks. H35-581_V2.0 exam is designed to evaluate the candidate's knowledge of 5G radio network planning and optimization, 5G network architecture, 5G network performance management, and 5G network security. H35-581_V2.0 Exam also covers topics such as 5G network slicing, 5G network automation, and 5G network deployment.
>> Reliable H35-581_V2.0 Exam Sample <<
Do you want to obtain your certificate as quickly as possible? If you do, just choose us. You can get your downloading link within ten minutes after your payment for H35-581_V2.0 training materials, and you can start your learning as quickly as possible. In addition, H35-581_V2.0 training materials of us are high quality, and you just need to spend 48 to 72 hours on practicing, and you can pass the exam successfully. If you have any questions about the H35-581_V2.0 Exam Dumps, just contact us, we will give you reply as soon as possible.
Huawei H35-581_V2.0 (HCIP-5G-RNP&RNO V2.0) Certification Exam is a professional certification exam that focuses on the skills and knowledge required to design and deploy 5G Radio Access Network (RAN) and Radio Network Optimization (RNO) solutions. H35-581_V2.0 Exam is designed to test the candidates' understanding of 5G technologies, including 5G RAN architecture, 5G RAN protocols, 5G RAN interfaces, 5G RAN security, and 5G RAN optimization.
NEW QUESTION # 29
Which of the following represents an availability KPI in NR system performance measurement?
Answer: A
Explanation:
Radio network unavailability rate is the correct answer because it measures the proportion of time during which a radio-network resource or service is unavailable for normal operation.
In NR performance management, Key Performance Indicators (KPIs) are classified according to the network characteristics they evaluate, including availability, accessibility, retainability, mobility, resource utilization, and traffic performance.
Availability KPIs assess whether network resources remain operational and capable of providing their intended services during the measurement period.
The radio network unavailability rate can be expressed conceptually as the ratio of accumulated unavailable time to the applicable observation period.
A lower unavailability rate indicates better network availability.
The remaining options represent different performance categories.
PRB usage measures the utilization of Physical Resource Blocks and is primarily a radio-resource utilization indicator.
Average cell throughput measures the rate at which data is successfully transferred during the relevant measurement interval, making it a capacity or throughput indicator.
Uplink/downlink traffic volume measures the amount of data carried by the network over a defined period.
Unlike these traffic and utilization indicators, radio network unavailability directly characterizes operational service availability.
Therefore, option C is the appropriate availability KPI.
Official Reference: 3GPP TS 28.554, Section 6.10.1, Availability KPI , including Cell Availability and Radio Access Network Availability; TS 28.552, 5G Performance Measurements .
NEW QUESTION # 30
Which of the following information enables the base station, under TDD uplink/downlink reciprocity principles, to select multiple optimal orthogonal beams from the infinite set of beams?
Answer: C
Explanation:
Sounding Reference Signals (SRS) enable a gNodeB to estimate uplink channel characteristics and use the resulting information for beamforming and spatial transmission optimization in Time Division Duplex (TDD) networks.
In TDD operation, uplink and downlink transmissions occupy the same carrier-frequency band at different times.
Under appropriate channel conditions and with suitable radio-frequency calibration, the system can exploit uplink/downlink channel reciprocity.
The UE transmits configured SRS resources, which the gNodeB receives through its antenna array.
By processing these reference signals, the gNodeB estimates channel characteristics associated with different antenna elements and spatial directions.
The resulting Channel State Information can be used to derive downlink precoding weights, identify suitable transmission beams, and support multi-user MIMO scheduling.
SRS-based channel estimation is particularly valuable in Massive MIMO deployments because it reduces dependence on extensive downlink CSI feedback.
The other reference signals have different primary functions.
CSI-RS supports downlink channel-state measurement and CSI reporting.
PT-RS assists with phase-noise estimation and compensation.
DMRS supports channel estimation for demodulating the associated physical-channel transmission.
Therefore, SRS is the correct answer because it supplies uplink sounding information that can be exploited for reciprocity-based downlink beamforming.
Official Reference: 3GPP TS 38.211, Section 6.4.1.4, Sounding Reference Signal ; TS 38.214, Section 6.2.1, SRS Transmission Procedures ; TR 38.922, discussion of TDD channel reciprocity.
Technical warning / qualification: The phrase infinite set of beams is not precise. Actual base stations have finite antenna dimensions and practical implementation constraints. SRS supports channel-based beam and precoder optimization; it does not guarantee selection from a mathematically infinite set of orthogonal beams.
NEW QUESTION # 31
Which of the following statements correctly compare LTE PCI with NR PCI?
Answer: C
NEW QUESTION # 32
For both the VoNR and EPS fallback solutions, the 5GC must interwork with the IMS.
Answer: B
Explanation:
The statement is true because both Voice over New Radio (VoNR) and Evolved Packet System (EPS) fallback provide voice services through the IP Multimedia Subsystem (IMS), although the radio-access and core-network procedures used to deliver the voice session differ.
In a VoNR deployment, the UE maintains its connection to the 5G Core (5GC) through NR. IMS signaling and media traffic are transported over an appropriate PDU session, with the 5GC supporting QoS-flow establishment, policy enforcement, and connectivity to the IMS network.
The Session Management Function (SMF) manages the corresponding PDU session, while the User Plane Function (UPF) provides user-plane connectivity toward the IMS data network.
EPS fallback applies when the 5G system cannot provide the required IMS voice service directly over its existing radio access.
In this case, the 5GC and NG-RAN coordinate a handover or redirection toward LTE connected to the EPC.
IMS voice establishment or continuation then takes place over the EPS.
Importantly, EPS fallback does not mean that the voice-media path remains anchored in the 5GC after fallback. It means that the 5G system participates in IMS voice-service support and coordinates access to EPS when necessary.
Official Reference: 3GPP TS 23.501, Sections 5.16.3.1-5.16.3.10, IMS Support and IMS Voice Service via EPS Fallback .
NEW QUESTION # 33
For the formula used to calculate PUSCH power during initial access, which statement about path loss (PL) is correct?
Answer: C
Explanation:
Who estimates it?
* The UE estimates the path loss ( ), not the gNodeB.
Uplink vs. Downlink:
* Because the UE does not know the uplink channel path loss directly prior to transmitting, it utilizes the channel reciprocity principle (or assumes average path loss symmetry).
* The UE calculates the downlink path loss ( ) by taking the difference between the transmitted reference signal power broadcasted by the network (ss-PBCH-BlockPower or CSI-RS power) and the measured received power (higher-layer filtered RSRP):
Usage:
* This estimated downlink path loss is then inserted into the open-loop power control formula to calculate the required uplink transmit power for PUSCH (including Msg3 during initial access).
NEW QUESTION # 34
......
New H35-581_V2.0 Test Registration: https://www.braindumpstudy.com/H35-581_V2.0_braindumps.html