P.S. Free & New F5CAB3 dumps are available on Google Drive shared by ITExamSimulator: https://drive.google.com/open?id=1JLk9J0GZXZM8pCoDiL6dSjNoNnqhggKq
Having a good command of processional knowledge in this line, they devised our high quality and high effective F5CAB3 study materials by unremitting effort and studious research. They are meritorious and unsuspecting experts with professional background. By concluding quintessential points into F5CAB3 Preparation engine, you can pass the exam with the least time while huge progress. And our pass rate of the F5CAB3 exam questions is high as 98% to 100%.
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
>> F5CAB3 Exam Passing Score <<
The downloading process is operational. It means you can obtain F5CAB3 quiz torrent within 10 minutes if you make up your mind. Do not be edgy about the exam anymore, because those are latest F5CAB3 exam torrent with efficiency and accuracy. You will not need to struggle with the exam. Besides, there is no difficult sophistication about the procedures, our latest F5CAB3 Exam Torrent materials have been in preference to other practice materials and can be obtained immediately.
NEW QUESTION # 33
Application administrators are reporting that nodes different from those configured in the pool are selected.
The use of an iRule is suspected.
How can the BIG-IP Administrator check if an iRule is used for this traffic? (Choose two answers)
Answer: A,D
Explanation:
In BIG-IP systems, iRules influence traffic only when they are attached to a Virtual Server. If application traffic is being sent to nodes or pool members that are not defined in the pool, this typically indicates that an iRule is overriding the default load-balancing behavior by explicitly selecting a pool or node.
According to BIG-IP Administration: Data Plane Configuration and official F5 guidance:
* iRules are associated with Virtual Servers, not directly with pools or nodes.
* To determine whether an iRule is actively affecting traffic, the administrator must inspect the Virtual Server configuration.
Explanation of the correct answers:
* B. Via the GUI at the Resources tab for the virtual serverThe Resources tab in the Configuration Utility displays all traffic-handling objects applied to the Virtual Server, including assigned iRules. This is the primary GUI location to verify whether an iRule is influencing data plane traffic.
* C. Via TMSH with the list /ltm virtual <virtual_server> commandThis TMSH command displays the full Virtual Server configuration, including any iRules listed under the rules section. It is the authoritative CLI method to confirm iRule usage.
Why the other options are incorrect:
* A. Via TMSH with the list /ltm rule <irule> commandThis command only shows the contents of an iRule and does not indicate whether the iRule is attached to or used by any Virtual Server.
* D. Via the GUI at the iRule tab for the virtual serverBIG-IP does not provide a dedicated "iRule" tab on Virtual Servers. iRules are viewed and managed under the Resources tab.
Correct Conclusion:
To verify whether an iRule is responsible for unexpected node selection, the BIG-IP Administrator must examine the Virtual Server configuration, either through the Resources tab in the GUI or by using TMSH to list the Virtual Server configuration.
NEW QUESTION # 34
Refer to the exhibit.
A BIG-IP Administrator configures a Virtual Server to handle HTTPS traffic. Users report that the application is NOT working. Which additional configuration is required to resolve this issue?
Answer: C
Explanation:
According to the provided exhibit, the "SSL Profile (Client)" section in the Virtual Server configuration is empty. For a BIG-IP system to process HTTPS traffic, it must act as an SSL/TLS endpoint. This process, known as SSL Termination or SSL Offload, requires the assignment of a Client SSL Profile to the Virtual Server. Without this profile, the BIG-IP does not have the necessary certificate and private key information to perform the SSL handshake with the client's browser. Consequently, when a user attempts to connect via HTTPS, the TCP connection may establish, but the SSL handshake will fail because the BIG-IP will not know how to decrypt the incoming encrypted packets.
A Client SSL profile defines the ciphers, certificates, and keys that the BIG-IP uses to communicate securely with the client. In a standard HTTPS deployment, the BIG-IP decrypts the traffic and can then send it to the backend pool members either as plain text (header insertion/manipulation) or re-encrypt it using a Server SSL profile. While a Server SSL profile (Option C) is needed if the backend servers themselves require HTTPS, the initial failure for a user reaching a Virtual Server is almost always the lack of a Client SSL profile to terminate the user's connection. Changing the Service Port to HTTP (Option D) would be incorrect because the goal is to handle HTTPS traffic (typically port 443). Assigning the "clientssl" or a custom client-side profile from the "Available" list to the "Selected" list in the GUI is the mandatory step to make the Virtual Server operational for secure web traffic.
NEW QUESTION # 35
Refer to the exhibit.
A BIG-IP Administrator needs to configure health monitors for a newly configured server pool named Pool_B. Which health monitor settings will ensure that all pool members will be accurately marked as available or unavailable?
Answer: A
Explanation:
The pool member list in the exhibit shows servers listening on four distinct service ports: 80 (HTTP), 21 (FTP), 443 (HTTPS), and 22 (SSH). To accurately monitor a pool where members provide different services, the administrator must apply monitors that correspond to each of those specific services.
The key to this configuration is the Availability Requirement (also known as "Monitor Rule"). If the administrator sets the requirement to "All health monitors," every single monitor (HTTP, HTTPS, FTP, and SSH) must pass for a member to be marked "Up." This would cause an immediate failure: for example, a server listening only on port 80 would fail the HTTPS, FTP, and SSH checks, resulting in the member being marked "Down" even if the HTTP service is healthy.
To ensure accuracy, the administrator should apply all four relevant monitors and set the Availability Requirement to at least one monitor. With this setting, the BIG-IP marks a member as "Up" if any of the assigned monitors return a successful response. Therefore, the member at 10.200.50.210:80 will stay "Up" as long as the HTTP monitor passes, even though it fails the FTP, HTTPS, and SSH monitors. This configuration allows a single pool to contain diverse service types while ensuring that the specific port defined for each member is verified correctly. Option C is incorrect because ICMP only checks if the IP is alive, not if the specific service port is functioning.
NEW QUESTION # 36
The BIG-IP Administrator has configured an HTTP health monitor applied to a Pool of HTTP web servers hosting www.f5.com, but all Pool Members show a DOWN status. The web server is returning a response of '
400 Bad Request ' . What would be the correct monitor Send string?
Answer: C
Explanation:
A 400 Bad Request response from an HTTP/1.1 web server is a definitive indicator that the HTTP request sent by the health monitor is missing a required Host header . In HTTP/1.1, the Host header is mandatory per RFC 7230. Web servers - particularly those hosting named virtual hosts such as www.f5.com - will reject any HTTP/1.1 request that omits the Host header, returning a 400 error, which the BIG-IP monitor interprets as a failed health check, marking all members DOWN.
The correct Send string must include:
* The GET request line with HTTP/1.1 protocol declaration
* A \r\n (carriage return + line feed) after the request line
* The Host: www.f5.com header to satisfy HTTP/1.1 requirements
* A \r\n after the Host header
* Connection: Close header to instruct the server to close the connection after responding
* A final \r\n\r\n to properly terminate the HTTP request headers
Only option C satisfies all these requirements with the correct syntax and Host header inclusion.
Option D (the current configured string) omits the Host header entirely - the root cause of the 400 error.
Options A and B are structurally incomplete or syntactically malformed.
Reference: BIG-IP Administration - Data Plane Configuration, Module: Health Monitors - HTTP Monitor Send String Configuration and HTTP/1.1 Host Header Requirements.
NEW QUESTION # 37
Refer to the exhibit.
A BIG-IP Administrator needs to configure health monitors for a newly configured server pool named Pool_B.
Which health monitor settings will ensure that all pool members will be accurately marked as available or unavailable? (Choose one answer)
Answer: D
Explanation:
From the exhibit, the pool contains different applications on different service ports (for example, HTTP/80, FTP/21, HTTPS/443, SSH/22). To mark pool members correctly, BIG-IP must be able to verify the actual service running on each member's port.
In BIG-IP Administration: Data Plane Configuration, monitor behavior is described as follows:
* When multiple monitors are assigned to a pool, the Availability Requirement controls how monitor results are evaluated:
* At least one = the pool member is marked up if any one of the assigned monitors succeeds.
* All = the pool member is marked up only if every assigned monitor succeeds.
* For pools containing members with different services/ports, using All can incorrectly mark members down because monitors intended for other services will fail on the wrong port.
Why C is correct:
* Assigning HTTPS, HTTP, FTP, and SSH covers the actual services shown in the pool.
* Setting the Availability Requirement to at least one ensures that each pool member is considered available when its appropriate service monitor succeeds, without being forced to pass unrelated service monitors.
Why the other options are incorrect:
* A / D (Availability Requirement = all): would cause members to be marked down when unrelated monitors fail (e.g., SSH monitor against an HTTP member).
* B (includes ICMP): ICMP can indicate the host is reachable even if the application service is down, which does not "accurately" reflect service availability.
Therefore, the best choice is HTTPS, HTTP, FTP, and SSH with Availability Requirement of at least one health monitor.
NEW QUESTION # 38
......
Our F5CAB3 practice materials compiled by the most professional experts can offer you with high quality and accuracy practice materials for your success. Up to now, we have more than tens of thousands of customers around the world supporting our F5CAB3 exam torrent. If you are unfamiliar with our F5CAB3 Study Materials, please download the F5CAB3 free demos for your reference, and to some unlearned exam candidates, you can master necessities by our F5CAB3 practice materials quickly. So our F5CAB3 materials are elemental materials you cannot miss.
F5CAB3 Exam Material: https://www.itexamsimulator.com/F5CAB3-brain-dumps.html
DOWNLOAD the newest ITExamSimulator F5CAB3 PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=1JLk9J0GZXZM8pCoDiL6dSjNoNnqhggKq