P.S. Kostenlose und neue 200-301 Prüfungsfragen sind auf Google Drive freigegeben von ZertFragen verfügbar: https://drive.google.com/open?id=1ge-1i6jytJf8MXNJpya0oQZ1JGDeTJsB
Wollen Sie Cisco 200-301 Zeritifizierungsprüfung ablegen? Wollen Sie die Cisco 200-301 Zertifizierung bekommen? Wie können Sie ohne sehr gute Vorbereitung diese Prüfung ablegen? Tatsächlich gibt es eine Weise für Sie, in sehr beschränkter Zeit die Cisco 200-301 Prüfung leicht zu bestehen. Was können Sie machen? Es ist erreichbar, dass Sie die Cisco 200-301 Dumps von ZertFragen benutzen.
| Section | Weight | Objectives |
|---|---|---|
| IP Services | 10% | - Configure network devices for remote access using SSH - Explain the role of DHCP and DNS within the network - Explain the function of SNMP in network operations - Explain the forwarding per-hop behavior (PHB) for QoS such as classification, marking, queuing, congestion, policing, shaping - Configure and verify DHCP client and relay - Configure and verify inside source NAT using static and pools - Describe the use of syslog features including facilities and levels - Describe the capabilities and function of TFTP/FTP in the network - Configure and verify NTP operating in a client and server mode |
| Automation and Programmability | 10% | - Recognize the capabilities of configuration management mechanisms Puppet, Chef, and Ansible - Describe controller-based and software defined architectures (overlay, underlay, and fabric) - Compare traditional networks with controller-based networking - Describe characteristics of REST-based APIs (CRUD, HTTP verbs, and data encoding) - Interpret JSON encoded data - Explain how automation impacts network management - Compare traditional campus device management with Cisco DNA Center enabled device management |
| Network Fundamentals | 20% | - Describe characteristics of network topology architectures - Verify IP parameters for Client OS (Windows, Mac OS, Linux) - Describe switching concepts - Configure and verify IPv4 addressing and subnetting - Identify interface and cable issues (collisions, errors, mismatch) - Compare physical interface and cabling types - Compare IPv6 address types - Compare TCP to UDP - Explain virtualization fundamentals (virtual machines) - Describe the need for private IPv4 addressing - Explain the role and function of network components - Describe wireless principles - Configure and verify IPv6 addressing and prefix |
| IP Connectivity | 25% | - Configure and verify single area OSPFv2 - Determine how a router makes a forwarding decision by default - Configure and verify IPv4 and IPv6 static routing - Interpret the components of routing table - Describe the purpose of first hop redundancy protocol |
| Security Fundamentals | 15% | - Describe wireless security protocols (WPA, WPA2, and WPA3) - Define key security concepts (threats, vulnerabilities, exploits, and mitigation techniques) - Describe remote access and site-to-site VPNs - Configure device access control using local passwords - Configure Layer 2 security features (DHCP snooping, dynamic ARP inspection, and port security) - Configure and verify access control lists - Describe security program elements (user awareness, training, and physical access control) - Differentiate authentication, authorization, and accounting concepts - Configure WLAN using WPA2 PSK using the GUI - Describe security password policies elements, such as management, complexity, and password alternatives (multifactor authentication, certificates, and biometrics) |
| Network Access | 20% | - Configure and verify interswitch connectivity - Describe physical infrastructure connections of WLAN components (AP, WLC, access/trunk ports, and LAG) - Configure and verify Layer 2 discovery protocols (Cisco Discovery Protocol and LLDP) - Configure and verify VLANs (normal range) spanning multiple switches - Describe Cisco Wireless Architectures and AP modes - Configure and verify (Layer 2/Layer 3) EtherChannel (LACP) - Configure the components of a wireless LAN access for client connectivity using GUI only such as WLAN creation, security settings, QoS profiles, and advanced WLAN settings - Describe AP and WLC management access connections (Telnet, SSH, HTTP, HTTPS, console, and TACACS+/RADIUS) - Describe the need for and basic operations of Rapid PVST+ Spanning Tree Protocol |
>> 200-301 Pruefungssimulationen <<
In der heutigen konkurrenfähigen IT-Branche können Sie mit IT-Zertifikaten Schritt für Schritt befördert werden. Viele Firmen würden Ihnen einen Berufsaufstieg oder die Gehaltserhöhung laut dem Goldgehalt Ihrer Zertifikate geben. Die Cisco 200-301 Zertifizierungsprüfung ist eine Prüfung von hohem Goldgehalt. Das Cisco 200-301 Zertifikat könne die Bedürfnisse der hart arbeitenden IT-Fachleuten abdecken. ZertFragen bietet Ihnen die zielgerichtete online Prüfungen zur 200-301 Zertifizierungsprüfung. Sie können im Internet teilweise die Prüfungsfragen und Anworten zur Cisco 200-301 Zertifizierungsprüfung kostenlos als Probe herunterladen.
920. Frage
Which Rapid PVST+ port state does a port operate in without receiving BPDUs from neighbors or updating the address database?
Antwort: C
Begründung:
A LAN port in the disabled state does not participate in frame forwarding or STP. A LAN port in the disabled state is virtually nonoperational.
A disabled LAN port performs as follows:
Discards frames received from the attached segment.
Discards frames switched from another port for forwarding.
Does not incorporate the end station location into its address database. (There is no learning, so there is no address database update.) Does not receive BPDUs from neighbors.
Does not receive BPDUs for transmission from the system module.
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5000/sw/layer2/521_n1_1/b_Ne xus_5000_Layer2_Config_521N1.html
921. Frage
Refer to Exhibit.
Refer lo the exhibit. What is the next-hop P address for R2 so that PC2 reaches the application server via ElGRP?
Antwort: A
922. Frage
What authentication type is used by SNMPv2?
Antwort: A
923. Frage
All physical cabling is in place. Router R4 and PCI are fully configured and inaccessible. R4's WAN interfaces use .4 in the last octet for each subnet.
Configurations should ensure that connectivity is established end-to-end.
1 . Configure static routing to ensure RI prefers the path through R2 to reach only PCI on R4's LAN
2. Configure static routing that ensures traffic sourced from RI will take an alternate path through R3 to PCI in the event of an outage along the primary path
3. Configure default routes on RI and R3 to the Internet using the least number of hops Guidelines This is a lab item in which tasks will be performed on virtual devices.
* Refer to the Tasks tab to view the tasks for this lab item.
* Refer to the Topology tab to access the device console(s) and perform the tasks.
* Console access is available for all required devices by clicking the device icon or using the tab(s) above the console window.
* All necessary preconfigurations have been applied.
* Do not change the enable password or hostname for any device.
* Save your configurations to NVRAM before moving to the next item.
* Click Next at the bottom of the screen to submit this lab and move to the next question.
* When Next is clicked, the lab closes and cannot be reopened.
Antwort: A
Begründung:
To configure static routing on R1 to ensure that it prefers the path through R2 to reach only PC1 on R4's LAN, you need to create a static route for the host 10.0.0.100/8 with a next-hop address of 20.0.0.2, which is the IP address of R2's interface connected to R1. You also need to assign a lower administrative distance (AD) to this route than the default AD of 1 for static routes, so that it has a higher preference over other possible routes. For example, you can use an AD of 10 for this route. To create this static route, you need to enter the following commands on R1's console:
R1#configure terminal R1(config)#ip route 10.0.0.100 255.0.0.0 20.0.0.2 10 R1(config)#end To configure static routing on R1 that ensures that traffic sourced from R1 will take an alternate path through R3 to PC1 in the event of an outage along the primary path, you need to create another static route for the host 10.0.0.100/8 with a next-hop address of 40.0.0.2, which is the IP address of R3's interface connected to R1. You also need to assign a higher AD to this route than the AD of the primary route, so that it has a lower preference and acts as a backup route. For example, you can use an AD of 20 for this route. This type of static route is also known as a floating static route. To create this static route, you need to enter the following commands on R1's console:
R1#configure terminal R1(config)#ip route 10.0.0.100 255.0.0.0 40.0.0.2 20 R1(config)#end To configure default routes on R1 and R3 to the Internet using the least number of hops, you need to create a static route for the network 0.0.0.0/0 with a next-hop address of the ISP's interface connected to each router respectively. A default route is a special type of static route that matches any destination address and is used when no other specific route is available. The ISP's interface connected to R1 has an IP address of 10.0.0.4, and the ISP's interface connected to R3 has an IP address of 50.0.0.4. To create these default routes, you need to enter the following commands on each router's console:
On R1: R1#configure terminal R1(config)#ip route 0.0.0.0 0.0.0.0 10.0.0.4 R1(config)#end On R3: R3#configure terminal R3(config)#ip route 0.0.0.0 0.0.0.0 50.0.0.4 R3(config)#end
924. Frage 
Refer to the exhibit. OSPF neighbors routers A, B, C, and D are sending a route for 10.227.150.160/27. When the current route for 10.227.150.160/27 becomes unavailable, which cost will router Y use to route traffic to
10.227.150.160/27?
Antwort: B
Begründung:
cost 40. Cisco routing logic is deterministic: a router first matches the most specific destination prefix, then uses administrative distance when competing route sources advertise the same prefix, and finally evaluates the protocol metric when multiple paths remain inside the same routing protocol. First-hop redundancy protocols add a separate default-gateway resiliency function for hosts on a LAN. The other choices in this question either point to the wrong route-selection rule, confuse a protocol metric with administrative distance, or apply a Layer 2 concept where a Layer 3 forwarding decision is required. In production, that mistake would create blackholing, asymmetric routing, or a backup path that never activates. Cisco CCNA 200-301 v1.1 tests this because route selection is fundamental to troubleshooting reachability. The selected answer matches the behavior Cisco routers use when forwarding traffic or maintaining gateway redundancy.
925. Frage
......
Die IT-Kandidaten sind meistens Beschäftigte. Deshalb haben viele nicht genügende Zeit, sich auf die Cisco 200-301 Prüfung vorzubereiten. Aber sie verwenden viel Zeit auf die Schulungskurse. Am wichtigsten haben Kandidaten viele wertvolle Zeit verschwendet. Hier empfenlen wir Ihnen eine gute Website für die Lernmaterialien. Teil der Prüfungsfragen und Antworten im Internet ist kostenlos. Was wichtig ist, dass die realen Simulationsübungen Ihnen zum Bestehen der Cisco 200-301 Zertifizierungsprüfung verhelfen können. Die Schulungsunterlagen zur Cisco 200-301 Zertifizierungsprüfung von ZertFragen können Ihnen nicht nur Ihre Zeitkosten ersparen , sondern Ihnen helfen, die Prüfung erfolgreich zu bestehen. So haben Sie keine Gründe, ZertFragen nicht zu wählen.
200-301 PDF: https://www.zertfragen.com/200-301_prufung.html
BONUS!!! Laden Sie die vollständige Version der ZertFragen 200-301 Prüfungsfragen kostenlos herunter: https://drive.google.com/open?id=1ge-1i6jytJf8MXNJpya0oQZ1JGDeTJsB