DOWNLOAD the newest PracticeDump NCP-BC-7.5 PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=1kG172k9nCT7RKl6zUsC_UhYeZgAAGjXg
Our NCP-BC-7.5 real exam has been on the top of the industry over 10 years with passing rate up to 98 to 100 percent. Ranking the top of the similar industry, we are known worldwide by helping tens of thousands of exam candidates around the world. To illustrate our NCP-BC-7.5 Study Materials better, you can have an experimental look of them by downloading our NCP-BC-7.5 demos freely. And you will find it is quite fast and convenient.
| Section | Objectives |
|---|---|
| Topic 1: Data Protection and Snapshots | - Snapshot retention policies design - Data restoration at VM and application level - Snapshot scheduling and management - Incremental backup implementation - Storage configuration for BCDR |
| Topic 2: Security and Hardening | - Approval policies configuration - Security best practices for replication - Designing secure BCDR environments - RBAC implementation for disaster recovery |
| Topic 3: BCDR Fundamentals and Requirements Interpretation | - Understanding RTO and RPO concepts and business impact analysis - Availability metrics and SLA definitions - Defining recovery strategies aligned to business requirements and risk tolerance - Translating business requirements into resilient recovery architectures - Selecting appropriate replication types (async, near-sync, synchronous, metro) |
| Topic 4: Monitoring, Testing and Troubleshooting | - Resolving third-party backup integration problems - Non-disruptive recovery testing - Troubleshooting permission issues and misconfigured DR environments - Documenting runbooks for incident response - Diagnosing network, storage and replication failures - Setting up alerts for replication lag |
| Topic 5: Replication and Failover Architecture | - Failover readiness validation - Recovery site capacity management - Synchronous replication across sites - Network segmentation for BCDR environments - Asynchronous replication planning |
| Topic 6: Nutanix Disaster Recovery Solutions | - Integration with third-party backup solutions - Configuring and managing replication policies - Failover procedures and execution - Metro Availability configuration and management - Recovery workflows using Nutanix native tools |
>> NCP-BC-7.5 Pass4sure Study Materials <<
PracticeDump also offers simple and easy-to-use Nutanix Certified Professional - Business Continuity (NCP-BC) 7.5 (NCP-BC-7.5) Dumps PDF files of real Nutanix NCP-BC-7.5 exam questions. It is easy to download and use on smart devices. Since it is a portable format, it can be used on a smartphone, tablet, or any other smart device. This Nutanix Certified Professional - Business Continuity (NCP-BC) 7.5 (NCP-BC-7.5) PDF file contains the most probable actual Nutanix Certified Professional - Business Continuity (NCP-BC) 7.5 (NCP-BC-7.5) exam questions.
NEW QUESTION # 42
Recently, several new VMs were deployed as part of an application expansion. Within 24 hours, the administrator notices no recovery points are being created for the new VMs.
During investigation, the administrator observes:
* Existing VMs in the Protection Policy continue to replicate successfully.
* No replication task failures are reported.
* Network connectivity between clusters is healthy.
* Storage capacity at the remote site is sufficient.
* The Protection Policy uses category-based entity selection.
* The newly deployed VMs were provisioned by a separate team.
What is the most likely root cause of the issue?
Answer: C
Explanation:
Nutanix Disaster Recovery (formerly Leap) utilizes a " policy-driven " approach where virtual machines are protected based on assigned " Categories " rather than individual VM names. This allows for automated protection: any VM tagged with a specific category (e.g., App:Web) is automatically picked up by the associated Protection Policy. When existing VMs are replicating fine but new ones are not, and there are no network or storage errors, the root cause is almost always an administrative oversight during provisioning.
If the separate team that deployed the VMs followed a checklist that didn ' t include category assignment, those VMs exist as " unprotected entities " in the eyes of Prism Central. The Protection Policy will ignore them because they do not match the entity selection criteria defined in the policy ' s configuration. To resolve this, the administrator must simply apply the correct category to the new VMs. Once tagged, the Cerebro service will identify the new members during its next scan and initiate the initial full seed replication to the recovery site. This scenario highlights the critical need for cross-team coordination and the use of automated deployment tools (like Nutanix Self-Service or Calm) to ensure that security and BCDR requirements are applied consistently during the VM lifecycle.
NEW QUESTION # 43
An administrator is planning a scheduled maintenance window that will temporarily interrupt network connectivity between the primary and recovery sites. Several Tier 1 VMs are protected with a Synchronous replication Protection Policy. What must the administrator do before beginning the maintenance window to prevent these VMs from becoming unresponsive without making RPO changes?
Answer: B
Explanation:
Synchronous replication is designed for zero data loss by requiring that every write be acknowledged at both the primary and recovery sites before the application can proceed. This creates a " hard " dependency on the network link between the two clusters . If the network connectivity is interrupted (e.g., during scheduled maintenance), the primary cluster will be unable to receive acknowledgments from the remote site.
By default, if the synchronous link is broken, the primary cluster may pause I/O to the protected VMs to prevent data inconsistency, which would cause the VMs to become unresponsive to users. To prevent this during planned maintenance while ensuring that the VMs stay online at the primary site, the administrator should temporarily transition the protection mode. Changing the Protection Policy from " Synchronous " to " Asynchronous " (Option C) removes the real-time write-mirroring requirement. This allows the VMs to continue serving local I/O independently of the remote site ' s status. While this technically increases the RPO during the maintenance window, it ensures application availability. Once the maintenance is complete and network connectivity is restored, the administrator can change the policy back to Synchronous. The system will then perform a catch-up sync and return to the Zero-RPO state once the data at both sites is identical again. This operational maneuver is a standard best practice for managing " stretched " cluster environments during infrastructure updates.
NEW QUESTION # 44
An administrator configures a protection policy that replicates workloads to two different recovery AZs (multisite deployment). Replication to both recovery AZs is successful. However, when attempting to perform failover to the second recovery AZ, the administrator cannot select it as a failover target.
Which setup step was most likely missed?
Answer: D
Explanation:
A multisite deployment in Nutanix Disaster Recovery allows a single primary cluster to replicate its workloads to multiple destination availability zones (AZs) for increased resilience. While a single " Protection Policy " can define the replication schedules to both recovery sites, the " Recovery Plan " is the separate object responsible for the actual orchestration of the failover.
A Recovery Plan is fundamentally a point-to-point object; it defines how to move workloads from Site A to Site B. If an administrator wants the ability to failover to either of two different recovery AZs, they must create two distinct Recovery Plans: one for AZ1 and another for AZ2. Each plan will contain the site-specific network mappings, boot sequences, and IP mappings relevant to that specific destination. If the administrator has only created a recovery plan for the first AZ, they will be able to see recovery points at both locations but will only have a " target " defined for the first site. The second AZ will not appear as a valid destination in the failover menu until its specific Recovery Plan is built and validated. This modular design ensures that each DR site can have its own customized networking and application orchestration logic.
NEW QUESTION # 45
What must be installed on a guest VM prior to enabling Self-Service Restore?
Answer: D
Explanation:
Nutanix Guest Tools (NGT) is a software bundle that must be installed on the guest virtual machine (VM) to enable advanced management and data protection features within the Nutanix ecosystem. For the specific functionality of Self-Service Restore (SSR), NGT provides the necessary communication drivers and the Nutanix SSR agent. This agent allows end-users or administrators to mount recovery point snapshots as local drives directly within the guest operating system. Without NGT, the cluster lacks the specialized hooks into the guest OS required to perform granular file-level recovery without restoring the entire VM. Furthermore, NGT facilitates the creation of application-consistent snapshots by interacting with the Windows Volume Shadow Copy Service (VSS), which is often a prerequisite for high-integrity backups of Tier-1 applications like SQL Server or Exchange. By installing NGT, the VM is granted the intelligence to browse and attach historical vDisks, effectively enabling the SSR workflow and reducing the operational burden on the infrastructure team for simple file recovery requests.
NEW QUESTION # 46
An administrator is configuring Disaster Recovery between an on-prem availability zone (AZ) and an NC2 cluster hosted in a public cloud. The business requires cross-cluster live migration between on-prem and NC2 without IP changes. Which configuration must be satisfied to meet this requirement?
Answer: C
Explanation:
Cross-Cluster Live Migration (CCLM) is an advanced Nutanix feature that allows a running virtual machine to move between two geographically separated clusters without downtime. When migrating between on- premises and a public cloud Nutanix Cloud Cluster (NC2), maintaining the VM ' s network identity (IP address) is often a critical requirement for application continuity.
Standard routing across different networks would require the VM to change its IP to match the destination subnet. To avoid this, an administrator must implement " Layer 2 (L2) stretching " . L2 stretching (often achieved using Nutanix Flow Virtual Networking and VXLAN/VPN tunnels) creates a unified broadcast domain that spans both the on-premises and cloud sites. This allows the VM to move to the cloud while remaining on the same logical subnet, meaning its default gateway and IP address remain valid. Without L2 stretching, a " Live Migration " would fail the moment the VM moved to the new cluster because its network connections would drop. This configuration is a prerequisite for seamless hybrid cloud mobility, enabling businesses to leverage cloud burst capacity or perform zero-downtime maintenance across sites.
NEW QUESTION # 47
......
Our Nutanix Certified Professional - Business Continuity (NCP-BC) 7.5 test torrent boost 99% passing rate and high hit rate so you can have a high probability to pass the exam. Our NCP-BC-7.5 study torrent is compiled by experts and approved by the experienced professionals. The questions and answers of our NCP-BC-7.5 study tool have simplified the important information and seized the focus and are updated frequently by experts to follow the popular trend in the industry. Because of these wonderful merits the client can pass the NCP-BC-7.5 Exam successfully with high probability.
Test NCP-BC-7.5 Vce Free: https://www.practicedump.com/NCP-BC-7.5_actualtests.html
BTW, DOWNLOAD part of PracticeDump NCP-BC-7.5 dumps from Cloud Storage: https://drive.google.com/open?id=1kG172k9nCT7RKl6zUsC_UhYeZgAAGjXg