BTW, DOWNLOAD part of Pass4training HPE7-A01 dumps from Cloud Storage: https://drive.google.com/open?id=1l9ANX_IqrYE4BAAQjsPOgVr_V-HkqR4H
The Aruba Certified Campus Access Professional Exam (HPE7-A01) certification has become a basic requirement to advance rapidly in the information technology sector. Since HP HPE7-A01 actual dumps are vital to prepare quickly for the examination. Therefore, you will need them if you desire to ace the Aruba Certified Campus Access Professional Exam (HPE7-A01) exam in a short time.
| Section | Weight | Objectives |
|---|---|---|
| Managing and Monitoring | 6% | - Network Operations
|
| Network Stack | 4% | - Networking Fundamentals
|
| Troubleshooting | 6% | - Fault Isolation and Diagnostics
|
| Routing | 13% | - Routing and Network Services
|
| WLAN | 17% | - Wireless LAN Technologies
|
| Security | 9% | - Campus Security
|
| Authentication and Authorization | 8% | - AAA Services
|
| Performance Optimization | 7% | - Optimization Techniques
|
| Connectivity | 8% | - Campus Connectivity Technologies
|
| Network Resiliency and Device Virtualization | 8% | - Redundancy and High Availability
|
| Switching | 14% | - Layer 2 and Layer 3 Switching
|
>> New HP HPE7-A01 Cram Materials <<
On the one hand, our company hired the top experts in each qualification examination field to write the HPE7-A01 training materials, so as to ensure that our products have a very high quality, so that users can rest assured that the use of our research materials. On the other hand, under the guidance of high quality research materials, the rate of adoption of the HPE7-A01 Study Materials preparation is up to 98% to 100%. Of course, it is necessary to qualify for a qualifying exam, but more importantly, you will have more opportunities to get promoted in the workplace.
NEW QUESTION # 95
What is an Aruba-recommended best practice for hardening that only applies to Aruba CX 6300 series switches with dedicated management ports?
Answer: A
Explanation:
Explanation
This is an Aruba-recommended best practice for hardening that only applies to Aruba CX 6300 series switches with dedicated management ports. A dedicated management port is a physical port that is used exclusively for out-of-band management access to the switch. A dedicated management VRF is a virtual routing and forwarding instance that isolates the management traffic from other traffic on the switch. By creating a dedicated management VRF and assigning the management port to it, the administrator can enhance the security and performance of the management access to the switch. The other options are incorrect because they either do not apply to switches with dedicated management ports or do not follow Aruba-recommended best practices. References: https://www.arubanetworks.com/assets/ds/DS_AOS-CX.pdf
https://www.arubanetworks.com/assets/tg/TB_ArubaCX_Switching.pdf
NEW QUESTION # 96
A company deployed Dynamic Segmentation with their CX switches and Gateways After performing a security audit on their network, they discovered that the tunnels built between the CX switch and the Aruba Gateway are not encrypted. The company is concerned that bad actors could try to insert spoofed messages on the Gateway to disrupt communications or obtain information about the network.
Which action must the administrator perform to address this situation?
Answer: B
Explanation:
Explanation
To address the situation of unencrypted tunnels between the CX switch and the Aruba Gateway, the administrator must enable Enhanced security on both devices. Enhanced security is a feature that provides encryption and authentication for GRE tunnels between CX switches and Aruba Gateways using IPSec.
Enhanced security can be enabled globally or per tunnel on both devices using CLI commands or Web UI options. The other options are incorrect because they either do not provide encryption or authentication for GRE tunnels or do not exist as features. References:
https://www.arubanetworks.com/techdocs/AOS-CX/10.04/HTML/5200-6728/bk01-ch05.html
https://www.arubanetworks.com/assets/ds/DS_AOS-CX.pdf
NEW QUESTION # 97
Which statements regarding Aruba NAE agents are true? (Select two )
Answer: A,E
Explanation:
The statements that are true regarding Aruba NAE agents are A and C.
A) A single NAE script can be used by multiple NAE agents. This means that you can create different instances of the same script with different parameters or settings. For example, you can use the same script to monitor different VLANs or interfaces on the switch1.
C) NAE agents will never consume more than 10% of switch processor resources. This is a built-in safeguard that prevents the agents from affecting the switch performance or stability. If an agent exceeds the 10% limit, it will be automatically disabled and an alert will be generated2.
The other options are incorrect because:
B) NAE agents are not active at all times. They can be enabled or disabled by the user, either manually or based on a schedule. They can also be disabled automatically if they encounter an error or exceed the resource limit1.
D) NAE scripts do not need to be reviewed and signed by Aruba before being used. You can create your own custom scripts using Python and upload them to the switch or Aruba Central. You can also use the scripts provided by Aruba or other sources, as long as they are compatible with the switch firmware version1.
E) A single NAE agent cannot be used by multiple NAE scripts. An agent is an instance of a script that runs on the switch. Each agent can only run one script at a time1.
NEW QUESTION # 98
You are helping an onsite network technician bring up an Aruba 9004 gateway with ZTP for a branch office The technician was to plug in any port for the ZTP process to start Thirty minutes after the gateway was plugged in new users started to complain they were no longer able to get to the internet. One user who reported the issue stated their IP address is 172.16 0.81. However, the branch office network is supposed to be on 10.231 81.0/24.
What should the technician do to alleviate the issue and get the ZTP process started correctly?
Answer: B
Explanation:
This is the correct action to alleviate the issue and get the ZTP (Zero Touch Provisioning) process started correctly for an Aruba 9004 gateway. ZTP is a feature that allows an Aruba gateway to automatically download its configuration from Aruba Central without any manual intervention. To use ZTP, the gateway must be connected to a DHCP-enabled network and have Internet access.
The gateway must also be added to Aruba Central using its MAC address and serial number. The default port for ZTP on an Aruba 9004 gateway is G0/0/1, which is labeled as Internet on the device. The other options are incorrect because they either do not use the correct port for ZTP or do not add the device to Aruba Central.
NEW QUESTION # 99
Which component is used by the Aruba Network Analytics Engine (NAE)?
Answer: A
Explanation:
Explanation
The component that is used by the Aruba Network Analytics Engine (NAE) is D. Current State Database.
The Current State Database is a database that stores the configuration and state information of the switch, such as interfaces, VLANs, routing protocols, statistics, and more. The NAE can access this database through the AOS-CX REST API and monitor the values of any data point using monitors. The NAE can also track the history of the values in a time-series database and correlate them with network events or configuration changes1. The Current State Database provides NAE with direct visibility into the entire current state of the device, which enables intelligent troubleshooting and automation of network tasks1.
The other options are incorrect because:
* A. JSON-based scripts: JSON is a data format that is used to exchange information between applications. It is not a scripting language that can be used by NAE. NAE scripts are written in Python, which is a popular and powerful programming language1.
* B. Lisp-based agents: Lisp is a family of programming languages that are mainly used for artificial intelligence and functional programming. It is not a language that can be used by NAE. NAE agents are instances of scripts that run on the switch and collect relevant network information and trigger alerts or actions1.
* C. Ruby-based scripts: Ruby is a general-purpose programming language that is known for its expressiveness and elegance. It is not a language that can be used by NAE. NAE scripts are written in Python, which is a popular and powerful programming language1.
NEW QUESTION # 100
......
Our Software version has the advantage of simulating the real HPE7-A01 exam environment. Many candidates can’t successfully pass their real exams for the reason that they are too nervous to performance rightly as they do the practices. This Software version of HPE7-A01 practice materials will exactly help overcome their psychological fear. So you will be bound to pass your HPE7-A01 exam since you have perfected yourself in taking the HPE7-A01 exam with full confidence.
Real HPE7-A01 Braindumps: https://www.pass4training.com/HPE7-A01-pass-exam-training.html
What's more, part of that Pass4training HPE7-A01 dumps now are free: https://drive.google.com/open?id=1l9ANX_IqrYE4BAAQjsPOgVr_V-HkqR4H