ちなみに、Japancert EDGE-Expertの一部をクラウドストレージからダウンロードできます：https://drive.google.com/open?id=1c0VQYfGnA1sxmm6dmbj5MEI8qwiAk_Co
当社EDGEは、EDGE-Expert試験問題を編集するために、この分野で多くの主要な専門家を採用しています。 当社のチームベースの作業システムは、次世代の最高のEDGE-Expert試験トレントがJapancert最終的に形を成し遂げる精神と手を携える人材を最大限に引き出すように設計されています。 当社は、優れたアフターサービスを提供し、ガイドの急流に革新をもたらした実績があります。 当社の専門家がお客様に世界クラスのEDGE-ExpertのExcellence in Design for Greater Efficiencies (EDGE Expert) Examガイドトレントを作成できるため、お客様の成功が保証されます。 EDGE-Expert試験に合格する必要があります。
| Section | Weight | Objectives |
|---|---|---|
| Topic 1: Software & Methodology | 25% | - EDGE Software Interface
|
| Topic 2: EDGE System Overview | 15% | - Building Types & Applicability
|
| Topic 3: Energy Efficiency | 25% | - Energy Consumption
|
| Topic 4: Water Efficiency & Materials | 25% | - Materials Embodied Energy (EE)
|
| Topic 5: Financial & Results Analysis | 10% | - Results and outputs of EDGE
|
EDGE-Expert試験問題は、専門家によって編集され、長年の経験を持つ専門家によって承認されています。言語は理解しやすいため、学習者に障害はありません。EDGEのEDGE-Expertガイド急流は誰にでも適しています。コンテンツは習得が容易であり、重要な情報を簡素化しました。 EDGE-Expertテストトレントは、より重要な情報を少ない質問と回答で伝え、学習をリラックスして効率的にします。 EDGE-Expert試験問題を使用すると、EDGE-Expert試験に簡単に合格できます。
質問 # 43
Water consumption savings, resulting from greywater recovery, are based on which of the following?
正解：A
解説：
Greywater recovery in EDGE is a water efficiency measure, and the software calculates savings by comparing water consumption before and after implementing the measure. The EDGE Methodology Report explains the calculation method: "Water consumption savings from greywater recovery are calculated as the difference between the Base Case water consumption and the Improved Case water consumption after applying the measure. The Base Case represents the typical water use without any efficiency measures, serving as the benchmark for all savings calculations" (EDGE Methodology Report Version 2.0, Section 4.2: Water Savings Calculations). Option A, Base Case water consumption, is the correct reference point for determining savings, as it establishes the baseline against which the greywater recovery measure is evaluated. Option B (Improved Case water consumption) is the result after applying the measure, not the basis for savings. Option C (cost of water consumption at local tariff) and Option D (incremental cost of installation and cost of water consumption at local tariff) relate to financial outputs, not the direct calculation of water savings, as clarified:
"Water savings in EDGE are quantified in volume (liters or cubic meters), not cost, though cost savings are derived later using local tariffs" (EDGE User Guide, Section 5.2: Water Efficiency Measures). Thus, greywater recovery savings are based on Base Case water consumption (Option A).
Reference:EDGE Methodology Report Version 2.0, Section 4.2: Water Savings Calculations; EDGE User Guide Version 2.1, Section 5.2: Water Efficiency Measures.
質問 # 44
An EDGE Auditor is auditing a hospital design for Preliminary Certification. The EDGE Client has included photovoltaics as one of the energy measures resulting in an overall 21% saving in energy. The Auditor observes the photovoltaics are facing the wrong direction. What action should the Auditor take?
正解：B
解説：
The role of an EDGE Auditor is to verify the project's self-assessment as submitted, not to modify or redesign the project. The EDGE Expert and Auditor Protocols clearly define the Auditor's responsibilities: "During an audit, the EDGE Auditor must assess the energy measures as presented in the self-assessment, without altering the design or selections made by the Client. If discrepancies are found, such as incorrect orientation of photovoltaics, the Auditor should note the issue in the audit report but proceed with the assessment as submitted, allowing the Certification Provider to make the final decision" (EDGE Expert and Auditor Protocols, Section 4.1: Audit Process). Option C, assess the energy measures as they are presented without changing the photovoltaic selection, aligns with this protocol. Option A (contact the design team and suggest a better orientation) oversteps the Auditor's role, as they are not to provide design advice: "Auditors must not engage in design consultancy during an audit to avoid conflicts of interest" (EDGE Expert and Auditor Protocols, Section 2.3: Conflict of Interest). Option B (adjust the area of photovoltaic panels) involves modifying the assessment, which is prohibited: "Auditors cannot modify the Client's self-assessment; they must evaluate it as submitted" (EDGE Certification Protocol, Section 3.2: Audit Requirements). Option D (reject photovoltaics and notify the Client) is also incorrect, as Auditors do not have the authority to reject measures outright: "Rejection of measures is the responsibility of the Certification Provider, not the Auditor" (EDGE Certification Protocol, Section 3.3: CertificationDecision). Thus, the Auditor should assess as presented (Option C).
Reference:EDGE Expert and Auditor Protocols, Section 4.1: Audit Process, Section 2.3: Conflict of Interest; EDGE Certification Protocol, Section 3.2: Audit Requirements, Section 3.3: Certification Decision.
質問 # 45
The COP of the water-cooled chiller is 6, and the cooling thermal load is 3516 W. What is the power rating of the chiller?
正解：D
解説：
The Coefficient of Performance (COP) is used in EDGE to calculate the electrical power input required for a given thermal output of a chiller. The EDGE Methodology Report defines COP as: "COP is the ratio of thermal output to electrical input, expressed as COP = Thermal Output / Electrical Input. To find the electrical input (power rating), rearrange the formula: Electrical Input = Thermal Output / COP" (EDGE Methodology Report Version 2.0, Section 5.1: Energy Efficiency Metrics). Given the COP of the water-cooled chiller as 6 and the cooling thermal load (thermal output) as 3516 W, the power rating is calculated as follows: Electrical Input = 3516 W / 6 = 586 W. Option A, 586 W, matches this calculation. Option B (3510 W) is incorrect, as it is slightly less than the thermal output, implying an unrealistic COP near 1. Option C (3522 W) is slightly above the thermal output, also incorrect. Option D (21096 W) is the result of multiplying the thermal output by the COP (3516 × 6), which is the inverse of the correct calculation. The EDGE User Guide confirms: "For a chiller with a COP of 6, the electrical input is one-sixth of the thermal output, ensuring energy efficiency is accurately assessed" (EDGE User Guide, Section 4.2: Energy Efficiency Measures). Thus, the power rating is
586 W (Option A).
Reference:EDGE Methodology Report Version 2.0, Section 5.1: Energy Efficiency Metrics; EDGE User Guide Version 2.1, Section 4.2: Energy Efficiency Measures.
質問 # 46
Which of the following elements is considered in EDGE to estimate water use in homes?
正解：C
解説：
The EDGE software estimates water use in homes by considering elements that contribute to potable water demand, focusing on indoor and occupant-related usage. The EDGE User Guide details the elements included in water use calculations: "In EDGE, water use in homes is estimated based on occupant activities, including water for showers, faucets, toilets, laundry, and water heating, which accounts for hot water demand in these applications. These elements are modeled using standard usage assumptions for residential buildings" (EDGE User Guide, Section 5.2: Water Efficiency Measures). Option B, water heating, is explicitly included, as it represents the hot water demand for showers, faucets, and laundry, which is a significant component of residential water use. Option A (HVAC) is incorrect, as HVAC systems primarily consume energy, not water, except in specific cases like cooling towers, which are not typical in homes: "HVAC systems in homes, such as air conditioners, do not directly contribute to water use in EDGE calculations, unlike in commercial buildings with cooling towers" (EDGE Methodology Report Version 2.0, Section 4.2: Water Savings Calculations). Option C (exterior fountains) is also excluded, as EDGE focuses on indoor water use: "Exterior water use, such as for fountains or irrigation, is not typically included in EDGE's water use estimates for homes, unless specifically modeled as an optional measure, which fountains are not" (EDGE User Guide, Section 5.3: Additional Water Efficiency Measures). Option D (solar water heaters) is a measure to reduce energy use for water heating, not an element of water use itself: "Solar water heaters reduce the energy demand for water heating but do not change the volume of water used, which is what EDGE estimates for water use in homes" (EDGE User Guide, Section 4.2: Energy Efficiency Measures). The EDGE Methodology Report further specifies: "Water use in homes is calculated based on per-capita assumptions for activities like showering, flushing, and water heating, ensuring a standardized baseline for savings calculations" (EDGE Methodology Report Version 2.0, Section 4.2: Water Savings Calculations). Thus, water heating (Option B) is the element considered in EDGE to estimate water use in homes.
Reference:EDGE User Guide Version 2.1, Section 5.2: Water Efficiency Measures, Section 5.3: Additional Water Efficiency Measures, Section 4.2: Energy Efficiency Measures; EDGE Methodology Report Version
2.0, Section 4.2: Water Savings Calculations.
質問 # 47
Implementing the green building measures claimed for EDGE certification is the responsibility of
正解：C
解説：
According to the CBCI EDGE curriculum, the responsibility for implementing the green building measures selected in the EDGE software lies with the Client, also referred to as the Project Owner or Developer. The Client is accountable for ensuring that the energy, water, and materials strategies modeled in the improved case are actually incorporated into the project design and constructed as specified. This includes coordinating with architects, engineers, contractors, and suppliers to deliver the committed performance levels.
The EDGE Auditor and Certifier play independent verification roles within the certification process. Their responsibility is to review documentation, conduct design and site audits, and confirm that the measures claimed in the EDGE model have been properly implemented. They do not participate in design decisions or construction execution.
An EDGE Partner typically supports capacity building, promotion, or training activities within a region and does not carry direct project implementation responsibility.
The separation of roles ensures transparency and avoids conflicts of interest. The Client is responsible for implementation, while the Auditor verifies compliance and the Certifier issues the certification decision.
Therefore, the correct answer is the Client.
質問 # 48
......
Japancertは、これまでで最高のEDGE-Expert学習ガイドだけでなく、最も効率的な顧客のサーバーも提供することで、この分野で最も人気のある評判を所有しています。 EDGE-Expert認定資格を取得し、希望するより高い給与を達成するための最善かつ最速の方法をご案内します。 EDGE-Expert試験の準備により、EDGE-Expert学習質問の成績が向上し、生活の状態を変えることができます。専門的な知識の蓄積です。 EDGE-Expertブレインダンプでより成功するでしょう。
EDGE-Expert資格準備: https://www.japancert.com/EDGE-Expert.html
BONUS！！！ Japancert EDGE-Expertダンプの一部を無料でダウンロード：https://drive.google.com/open?id=1c0VQYfGnA1sxmm6dmbj5MEI8qwiAk_Co