DumpsTorrent provide all candidates with NSE6_FNC_AD-7.6 test torrent that is compiled by experts who have good knowledge of NSE6_FNC_AD-7.6 exam, and they are very professional in compile NSE6_FNC_AD-7.6 study materials. Not only that, our team checks the update every day, in order to keep the latest information of NSE6_FNC_AD-7.6 our test torrent. Once we have latest version, we will send it to your mailbox as soon as possible. It must be best platform to provide you with best NSE6_FNC_AD-7.6 study material for your exam.
| Section | Weight | Objectives |
|---|---|---|
| Network Visibility and Monitoring | 20% | - Troubleshooting network and device status - Logging and reporting - Device profiling and classification - Guest and contractor management |
| Deployment and Provisioning | 30% | - Security policies and enforcement - High Availability (HA) setup and monitoring - Access control and logical networks - Security automation configuration |
| Concepts and Initial Configuration | 25% | - Isolation networks and configuration wizard - Model and organize infrastructure devices - FortiNAC-F architecture and concepts |
| Integration | 25% | - Integration with FortiGate/FortiOS - FortiNAC-F Manager configuration - Syslog and SNMP trap integration - MDM and third-party device integration |
By propagating all necessary points of knowledge available for you, our NSE6_FNC_AD-7.6 study materials helped over 98 percent of former exam candidates gained successful outcomes as a result. Our NSE6_FNC_AD-7.6 exam questions have accuracy rate in proximity to 98 and over percent for your reference. And it is unique and hard to find in the market as our NSE6_FNC_AD-7.6 training guide. Besides, our price of the NSE6_FNC_AD-7.6 practive engine is quite favourable.
NEW QUESTION # 75
Refer to the exhibit.
An administrator is configuring FortiNAC-F for the onboarding of guest users.
Which IP address would be used for the gateway defined in the DHCP scope?
Answer: A
Explanation:
The DHCP scope for guest onboarding must use the default gateway of the guest VLAN. In the diagram, the guest network is associated with the interface labeled 10.20.1.250, which serves as the gateway for that subnet.
NEW QUESTION # 76
While discovering network infrastructure devices, a switch appears in the inventory topology with a question mark (?) on the icon. What would cause this?
Answer: A
Explanation:
In FortiNAC-F, the Inventory topology uses specific icons to represent the status and model of discovered network infrastructure. When a switch or other network device is discovered via SNMP, FortiNAC-F retrieves its System ObjectID (sysObjectID) to identify the specific make and model. This OID is then compared against the internal database of supported device mappings.
A question mark (?) icon appearing on a discovered switch indicates that while the discovery process successfully communicated with the device (meaning SNMP credentials were correct), the SNMP ObjectID is not recognized or mapped in the current version of FortiNAC-F. This essentially means the device is "unsupported" by the current software out-of-the-box. Because the OID is unknown, FortiNAC-F does not know which CLI or SNMP command set to use for critical functions like L2 polling (host visibility) or VLAN switching (enforcement). To resolve this, an administrator can manually "Set Device Mapping" to a similar existing model or a "Generic SNMP Device" if only basic L3 visibility is required.
"Discovered devices displaying a '?' icon indicate the currently running version does not have a mapping for that device's System OID (device is not supported). Device mappings are used to manage the device by performing functions such as L2/L3 Polling, Reading, and Switching VLANs."
NEW QUESTION # 77
While discovering network infrastructure devices, a switch appears in the inventory topology with a question mark (?) on the icon. What would cause this?
Answer: A
Explanation:
In FortiNAC-F, theInventory topologyuses specific icons to represent the status and model of discovered network infrastructure. When a switch or other network device is discovered via SNMP, FortiNAC-F retrieves itsSystem ObjectID (sysObjectID)to identify the specific make and model. This OID is then compared against the internal database of supported device mappings.
Aquestion mark (?)icon appearing on a discovered switch indicates that while the discovery process successfully communicated with the device (meaning SNMP credentials were correct), theSNMP ObjectID is not recognizedor mapped in the current version of FortiNAC-F. This essentially means the device is " unsupported " by the current software out-of-the-box. Because the OID is unknown, FortiNAC-F does not know which CLI or SNMP command set to use for critical functions like L2 polling (host visibility) or VLAN switching (enforcement). To resolve this, an administrator can manually " Set Device Mapping " to a similar existing model or a " Generic SNMP Device " if only basic L3 visibility is required.
" Discovered devices displaying a ' ? ' iconindicate the currently running version does not have a mapping for that device ' sSystem OID(device is not supported). Device mappings are used to manage the device by performing functions such as L2/L3 Polling, Reading, and Switching VLANs. " -Fortinet Technical Tip:
Options for devices unable to be modeled in Inventory.
NEW QUESTION # 78
Refer to the exhibit.
A FortiNAC-F N+1 HA configuration is shown.
What will occur if CA-2 fails?
Answer: B
Explanation:
In anN+1 High Availability (HA)configuration, a single secondary Control and Application (CA) server provides backup for multiple primary CA servers. The FortiNAC-F Manager (FortiNAC-M) acts as the centralized orchestrator for this cluster, monitoring the health of all participating nodes.
According to theFortiNAC-F 7.6.0 N+1 Failover Reference Manual, when a primary CA (such asCA-2in the exhibit) fails, the secondary CA (CA-3) is automatically promoted by the Manager to take over the specific workload and database functions of that failed primary. Crucially, the documentation specifies that even after this promotion, the system architecture maintains its N+1 logic. The secondary CA effectively " assumes the identity " of the failed primary while continuing to operate within the N+1 framework established by the Manager.
It doesnotmerge with CA-1 to form a traditional 1+1 active/passive cluster (A), nor does it engage in load balancing (D), as FortiNAC-F HA is designed for redundancy and failover rather than active traffic distribution. Furthermore, CA-3 does not " share " management with CA-1 (C); it independently handles the tasks originally assigned to CA-2. Throughout this failover state, the Manager continues to oversee the group, and CA-3 remains the designated secondary unit currently acting in a primary capacity for the downed node until CA-2 is restored.
" In an N+1 Failover Group, theSecondary CAis designed to take over the functionality ofany single failed primary componentwithin the group. The FortiNAC Manager monitors the primaries and initiates the failover to the secondary... Once failover occurs, the secondary continues to operate as the backup unit for the failed primary while remaining part of the managed N+1 HA configuration. " -FortiNAC-F 7.6.0 N+1 Failover Reference Manual: Failover Behavior Section.
NEW QUESTION # 79
Refer to the exhibit.
When a contractor account is created using this template, which value is set in the accounts Role field?
Answer: B
Explanation:
The correct answer is A . In the exhibit, the Template Name is Engineer-Contractor , and the selected Role option is Use a unique Role based on this template name . That means FortiNAC-F uses the template name itself as the role value for any account created from this guest/contractor template. The study guide confirms this behavior: by default, the Role field is populated with the template name, although the administrator can alternatively select from an existing role list. It also states that the role value in the guest and contractor template populates the Role field of any account created from that template.
Option B , Eng-Contractor , is wrong because that value is entered in the Security and Access Value field, not the Role field. That value can still be used in user/host profiles or policies, but it does not populate the account Role field. Option C , Contractor , is only the Visitor Type , which controls the kind of guest
/contractor account and associated icon behavior. Option D , Accounting Contractor , is visible in the disabled Select Role dropdown, but that option is not selected because the template is configured to use a unique role based on the template name.
NEW QUESTION # 80
......
We do not offer Fortinet NSE 6 - FortiNAC-F 7.6 Administrator (NSE6_FNC_AD-7.6) PDF questions only. Customizable web-based and desktop Fortinet NSE6_FNC_AD-7.6 practice exams are also available at DumpsTorrent. You can take our Fortinet NSE 6 - FortiNAC-F 7.6 Administrator (NSE6_FNC_AD-7.6) practice tests multiple times. These NSE6_FNC_AD-7.6 tests keep a record of your every attempt so you can review and overcome mistakes.
NSE6_FNC_AD-7.6 Exam Questions Pdf: https://www.dumpstorrent.com/NSE6_FNC_AD-7.6-exam-dumps-torrent.html