Test engine version is a simulation of real test; you can feel the atmosphere of formal test. You can well know your shortcoming and strength in the course of practicing Fortinet exam dumps. It adjusts you to do the NSEI_OTS_AR-7.6 Certification Dumps according to the time of formal test. Most IT workers like using it to test NSEI_OTS_AR-7.6 practice questions and their ability.
| Section | Objectives |
|---|---|
| Topic 1: Network security | - Configure security inspections for industrial protocols - Configure automation - Configure virtual patching |
| Topic 2: Network access control | - Configure network access authentication - Explain OT Ethernet concepts - Configure network segmentation schemas |
| Topic 3: Asset management | - Explain OT standard and Fortinet compliance - Fortinet Security Fabric for an OT network - Implement device detection on FortiGate and FortiNAC |
| Topic 4: Monitoring and risk assessment | - Perform risk assessment and management - Analyze security reports from FortiAnalyzer - Create FortiAnalyzer event handlers |
>> NSEI_OTS_AR-7.6 Reliable Test Tips <<
We think of providing the best services as our obligation. So we have patient colleagues offering help 24/7 and solve your problems about NSEI_OTS_AR-7.6 practice materials all the way. We have considerate services as long as you need us. Besides, to fail while trying hard is no dishonor. If you fail the exam with our NSEI_OTS_AR-7.6 Study Guide unfortunately, we will switch other versions or give your full money back assuming that you fail this time, and prove it with failure document. Do not underestimate your ability, we will be your strongest backup while you are trying with our NSEI_OTS_AR-7.6 actual tests.
NEW QUESTION # 13
As the first step in your OT network protection plan, you must identify the OT protocols that the FortiGate device supports. Which two configurations must you implement on this FortiGate device? (Choose two answers)
Answer: A,D
Explanation:
The correct answers are B and C . The study guide states that "You can use application control signatures to detect OT protocols" and that "Application control detects the protocols used in applications like Modbus, IEC 104, and the contents of the telecontrol messages" . It also shows that a Modbus application control profile can be enabled on a firewall policy "for OT protocol visibility in the monitor status." This directly supports B , because application control is the feature used to identify and monitor OT protocols on FortiGate.
The guide also explains under IPS that "By default, OT signatures are excluded from the signatures lists on the GUI until you enable them on the CLI" using config ips global and set exclude-signatures none .
Once enabled, FortiGate can use those OT signatures for OT-aware inspection and protection. That supports C as the second required configuration. A is related to device discovery, not protocol identification, and D is focused on exploit and vulnerability detection rather than the first-step goal of identifying OT protocols.
NEW QUESTION # 14
Refer to the exhibit.
A firewall policy page is shown. To improve the security of your OT network, you have configured a Supervisor profile in the firewall policies, as shown in the exhibit. However, a supervisor is reporting that he cannot ping PLC-1. What are the two reasons? (Choose two answers)
Answer: C,D
Explanation:
The correct answers are A and C .
Option A is correct because the study guide explains that with active authentication , FortiGate prompts the user only when they use "an acceptable login protocol." It states: "When you use only active authentication, if all possible policies that could match the source IP address have authentication enabled, then the user will receive a login prompt (assuming they use an acceptable login protocol)." A direct ping to PLC-1 uses ICMP , which is not the kind of login protocol used to trigger user authentication.
So the supervisor must first authenticate through a protocol such as HTTPS or Telnet , then the ICMP traffic can match the authenticated policy.
Option C is also correct because the exhibit shows policy ID 8 greyed out, meaning it is not enabled. That policy appears above the Supervisor_access (9) policy and allows broader access to PLC-1 , whereas policy 9 is limited to ALL_ICMP . The study guide explains that "Because the user has not yet authenticated, the user group aspect of the traffic does not match" and FortiGate continues searching for another complete match. In this case, with policy 8 disabled, the supervisor is left with only the ICMP rule, which cannot be used to perform the initial login step needed for active authentication.
Option B is not supported by the exhibit. Option D is incorrect because auth-on-demand always would force authentication prompts more aggressively, but the core problem here is that the user is trying to start with ICMP and the broader policy that could permit the initial authenticated access is disabled.
NEW QUESTION # 15
Refer to the exhibits.
A partial view of the Playbook Monitor page and the corresponding playbook configuration are shown.
Based on the monitor page and the configuration of the playbook, what has triggered the Run_Report task?
(Choose one answer)
Answer: C
Explanation:
Based on the provided exhibits from the FortiAnalyzer playbook engine:
* Playbook Trigger Condition : The Partial Playbook configuration exhibit shows that the playbook is set to trigger based on a condition where the Basic Handler Name is Equal To IPS_Attack_Handling.
* Event vs. Log : In FortiAnalyzer, the field Basic Handler Name is a property of an Event record, indicating the specific Event Handler that generated it. A playbook configured with this condition is triggered by an Event , not directly by a raw log.
* Playbook Execution Flow : The Partial Playbook Monitor view shows the execution sequence:
* Event_Trigger (Starter) : This is the entry point of the playbook, which matches the condition defined in the configuration.
* IPS_Attack_Incident : The first task executed after the trigger.
* Run_Report : The task in question, which is executed as part of the automated workflow initiated by the starter.
* Conclusion : Since the playbook ' s " Starter " is defined by the IPS_Attack_Handling handler name, an event produced by that handler is the root trigger for the entire playbook execution, including the Run_Report task.
Therefore, the Run_Report task was triggered (as part of the playbook) by an IPS_Attack_Handling event .
NEW QUESTION # 16
According to the IEC 62443 standard, your security level is 4 . What is your OT environment defending against? (Choose one answer)
Answer: B
Explanation:
Explanation:
NEW QUESTION # 17
Refer to the exhibit.
A partial OT network is shown. You want to provide the supervisor with secure remote access. Which two features can you implement on Edge-FortiGate ? (Choose two answers)
Answer: A,C
Explanation:
Based on the exhibit and the OT Security 7.6 Architect standards for Secure Remote Access :
* Secure Tunneling (Statement A) : The exhibit shows a Remote PC connecting through a VPN Cloud to the Edge-FortiGate . In the Fortinet architecture, IPsec VPN is the primary method for establishing a secure, encrypted tunnel for remote administrators or supervisors to access the internal OT segments (Level 2/3) from an external location.
* Multi-Factor Authentication (Statement B) : Secure remote access in OT environments (aligned with IEC 62443 standards) requires strong authentication. The study guide emphasizes the use of FortiToken to provide Two-Factor Authentication (2FA) for VPN users, ensuring that compromised credentials alone are not enough to gain access to critical infrastructure.
* FSSO (Statement D) : Fortinet Single Sign-On is generally used for identifying internal users already on the network to apply identity-based policies; it is not the primary mechanism for establishing the remote connection itself.
* SD-WAN (Statement C) : While SD-WAN can manage the path of the VPN traffic, it is a WAN optimization and reliability feature, not a " secure remote access " feature for a supervisor in the context of authentication and encryption.
NEW QUESTION # 18
......
Our NSEI_OTS_AR-7.6 study materials provide free trial service for consumers. If you are interested in our NSEI_OTS_AR-7.6 study materials, and you can immediately download and experience our trial question bank for free. Through the trial you will have different learning experience on NSEI_OTS_AR-7.6 exam guide , you will find that what we say is not a lie, and you will immediately fall in love with our products. As a key to the success of your life, the benefits that our NSEI_OTS_AR-7.6 Study Materials can bring you are not measured by money. NSEI_OTS_AR-7.6 test torrent can help you pass the exam in the shortest time.
NSEI_OTS_AR-7.6 Questions Pdf: https://www.dumpcollection.com/NSEI_OTS_AR-7.6_braindumps.html