Juniper JN0-364 Exam | JN0-364 Online Training - Pass Guaranteed for JN0-364: Service Provider Routing and Switching, Specialist (JNCIS-SP) Exam

BTW, DOWNLOAD part of TestPassed JN0-364 dumps from Cloud Storage: https://drive.google.com/open?id=1k5udNMicQM-QY2YvLiRTaW0LHbbjAZgE

No doubt the Service Provider Routing and Switching, Specialist (JNCIS-SP) certification exam is one of the most difficult TestPassed Juniper certification exams in the modern TestPassed world. This JN0-364 exam always gives a tough time to their candidates. It is hard to pass without in-depth JN0-364 exam preparation. The TestPassed understands this challenge and offers real, valid, and top-notch JN0-364 Exam Dumps in three different formats. These formats are JN0-364 PDF dumps files, desktop practice test software, and web-based practice test software.

Juniper JN0-364 Exam Syllabus Topics:

Section	Objectives
BGP and Routing Policy	- BGP fundamentals 1. Attributes and path selection 2. eBGP and iBGP operations - Routing policy control 1. Route filtering and manipulation 2. Import/export policies
OSPF and IS-IS Routing Protocols	- OSPF configuration and troubleshooting 1. Areas and LSAs 2. Adjacency and neighbor states - IS-IS operation in service provider networks 1. LSP and SPF calculation 2. Levels and routing hierarchy
MPLS and Service Provider Technologies	- VPN services 1. Layer 2 VPN overview 2. Layer 3 VPN concepts - MPLS fundamentals 1. Label switching and forwarding 2. LDP operations
Troubleshooting and Operations	- Network troubleshooting methodology 1. Protocol verification tools 2. Junos operational commands - Performance and monitoring 1. System logging and alarms 2. Traffic analysis basics
Service Provider Architecture & Junos Fundamentals	- Service provider network design basics 1. Core, edge, and access architecture 2. Scalability considerations - Junos OS routing fundamentals 1. Junos CLI and configuration hierarchy 2. Routing table and forwarding concepts

>> JN0-364 Online Training <<

Pass Guaranteed 2026 Juniper JN0-364 –High-quality Online Training

If you purchasing our JN0-364 simulating questions, you will get a comfortable package services afforded by our considerate after-sales services. We respect your needs toward the useful JN0-364 practice materials by recommending our JN0-364 Guide preparations for you. Only in a few minutes, your ordered JN0-364 exam questions are sent to you, and whenever you have any question on the JN0-364 practice guide, you can contact with our service at 24/7.

Juniper Service Provider Routing and Switching, Specialist (JNCIS-SP) Sample Questions (Q16-Q21):

NEW QUESTION # 16
Referring to the exhibit, you have configured an aggregate route that represents the
172.21.0.0/24, 172.21.1.0/24, and 172.21.2.0/24 networks. However, when you view the routing table, your new route hidden.
Which action would you perform to determine the problem?

A. Verify that you have defined a metric value for the aggregate route.
B. Verify that you have configured a policy on the device to accept aggregate routes.
C. Verify that you have set the preference to a lower default value.
D. Verify that you have active contributing routes on the device.

Answer: C

Explanation:
The exhibit shows an aggregate route configuration for the network 172.21.0.0/22, which would summarize the specific networks 172.21.0.0/24, 172.21.1.0/24, and 172.21.2.0/24. For an aggregate route to be active, it must have contributing routes in the routing table. If the route is hidden, it usually means there are no contributing routes that are active or the policy applied to the aggregate does not match any of the specific routes. Therefore, the first step in troubleshooting would be to verify that there are indeed active contributing routes for the aggregate to be valid.

NEW QUESTION # 17
Which two solutions are commonly used to send IPv6 traffic over IPv4 networks? (Choose two.)

A. 6over4
B. NAT6
C. 6to4
D. VXLAN

Answer: A,C

Explanation:
6to4 is an IPv6 transition mechanism that encapsulates IPv6 packets inside IPv4 packets, allowing IPv6 traffic to traverse an IPv4 network infrastructure.
6over4 is another tunneling mechanism that transports IPv6 packets over an IPv4 network by using IPv4 as the underlying transport, enabling IPv6 communication across IPv4-only networks.

NEW QUESTION # 18
You are using EBGP to connect to two upstream peers in the same AS. You want to make one of the links less preferred for traffic entering your network from the peer's AS.
Which feature should you use to achieve this goal?

A. AS-path prepending
B. origin code
C. a route reflector
D. local preference

Answer: A

Explanation:
AS-path prepending artificially lengthens the AS-path attribute by adding additional instances of the local AS number when advertising routes to a specific external peer. Because BGP prefers routes with shorter AS paths, the upstream AS will consider the prepended path less attractive and will prefer the other link when sending traffic toward the network.

NEW QUESTION # 19
You have configured graceful RE switchover (GRES), however you cannot complete the show system switchover command.
Referring to the exhibit, what is the problem?

A. The command is only available if non-stop routing is enabled.
B. The command is only available on the backup Routing Engine.
C. The command is only available If a backup router is configured.
D. The command is only available If graceful restart is enabled.

Answer: A

Explanation:
The show system switchover command is used to display the status of the Graceful Routing Engine Switchover (GRES) feature. This command is available when nonstop routing (NSR) is enabled, which works in conjunction with GRES to maintain uninterrupted routing in case of a Routing Engine switchover.

NEW QUESTION # 20
Exhibit:
user@Router-1> show route 172.24/16
inet.0: 9 destinations, 9 routes (9 active, 0 holddown, 0 hidden)
+ = Active Route, - = Last Active, * = Both
...
172.24.0.0/24 *[OSPF/150] 01:31:31, metric 0, tag 0
> to 172.20.0.2 via ge-0/0/2.0
to 172.20.1.2 via ge-0/0/3.0
user@Router-1> show route forwarding-table
Routing table: default.inet
Internet:
Destination Type RtRef Next hop Type Index NhRef Netif
...
172.24.0.0/24 user 0
172.20.0.2 ucst 551 2 ge-0/0/2.0
172.20.1.2 ucst 552 2 ge-0/0/3.0
Referring to the exhibit, which two statements are true? (Choose two.)

A. The router is performing default route load-balancing behavior.
B. This router will only choose the next hop with a > next to it in the routing table.
C. The default route load-balancing behavior of this router has been modified.
D. This router will choose both next hops in the routing table.

Answer: C,D

Explanation:
In Junos OS, understanding the distinction between theRouting Information Base (RIB)and theForwarding Information Base (FIB)is fundamental to analyzing traffic patterns and load-balancing behavior. The RIB (show route) contains all prefixes learned via various protocols, while the FIB (show route forwarding-table) contains only the active next-hops that are actually programmed into the Packet Forwarding Engine (PFE).
According to Juniper Networks technical documentation, the default behavior for Junos OS when encounteringEqual-Cost Multipath (ECMP)routes is to select only a single next-hop from the available candidates in the RIB and install that single path into the FIB. In a default state, even if the show route output displays multiple next-hops for a destination like 172.24.0.0/24, only one would have the active route symbol (
>) and only that one would appear in the forwarding table.
In the provided exhibit, the show route output shows two next-hops for 172.24.0.0/24, but only the first one (172.20.0.2) is marked with the>symbol as the active selection. However, the subsequent show route forwarding-table output reveals thatboth next-hops(172.20.0.2 and 172.20.1.2) are currently present in the forwarding table for that same destination. This discrepancy indicates that thedefault load-balancing behavior has been modified (Option B). This modification is typically achieved by creating a routing policy with the action then load-balance per-packet (which actually results in flow-based load balancing) and applying it to the forwarding table via the export statement under [edit routing-options forwarding-table].
Because the forwarding table now contains both next-hops, the router is no longer restricted to a single path.
Therefore, therouter will choose both next-hops in the routing table (Option D)for packet forwarding, distributing flows across the two available Gigabit Ethernet interfaces (ge-0/0/2.0 and ge-0/0/3.0). This ensures higher utilized bandwidth and provides redundancy at the data plane level.

NEW QUESTION # 21
......

If you don't have enough time to study for your certification exam, TestPassed provides Service Provider Routing and Switching, Specialist (JNCIS-SP) JN0-364 PDF Questions. You may quickly download Service Provider Routing and Switching, Specialist (JNCIS-SP) JN0-364 exam questions in PDF format on your smartphone, tablet, or desktop. You can Print Juniper pdf questions and answers on paper and make them portable so you can study on your own time and carry them wherever you go.

JN0-364 Valid Dumps Sheet: https://www.testpassed.com/JN0-364-still-valid-exam.html

BTW, DOWNLOAD part of TestPassed JN0-364 dumps from Cloud Storage: https://drive.google.com/open?id=1k5udNMicQM-QY2YvLiRTaW0LHbbjAZgE