Pass4Test의 Fortinet NSE6_EDR_AD-7.0덤프는 Fortinet NSE6_EDR_AD-7.0시험문제변경에 따라 주기적으로 업데이트를 진행하여 덤프가 항상 가장 최신버전이도록 업데이트를 진행하고 있습니다.구매한 Fortinet NSE6_EDR_AD-7.0덤프가 업데이트되면 저희측에서 자동으로 구매시 사용한 메일주소에 업데이트된 최신버전을 발송해드리는데 해당 덤프의 구매시간이 1년미만인 분들은 업데이트서비스를 받을수 있습니다.
| Section | Objectives |
|---|---|
| Topic 1: Threat Detection and Response | - Incident detection and alert handling - Automated response actions and remediation |
| Topic 2: FortiEDR Architecture and Components | - FortiEDR components overview (agents, management console, collectors) - System architecture and deployment models |
| Topic 3: Installation and Deployment | - Server and console installation requirements - Agent deployment and onboarding |
| Topic 4: Forensics and Investigation | - Event analysis and telemetry review - Endpoint investigation workflows |
| Topic 5: System Administration and Troubleshooting | - System monitoring and health checks - Troubleshooting common FortiEDR issues |
| Topic 6: Policy Configuration and Management | - Prevention and detection policies - Policy tuning and exclusions |
>> NSE6_EDR_AD-7.0퍼펙트 인증공부자료 <<
Pass4Test에서는 전문Fortinet NSE6_EDR_AD-7.0인증시험을 겨냥한 덤프 즉 문제와 답을 제공합니다.여러분이 처음Fortinet NSE6_EDR_AD-7.0인증시험준비라면 아주 좋은 덤프입니다. Pass4Test에서 제공되는 덤프는 모두 실제시험과 아주 유사한 덤프들입니다.Fortinet NSE6_EDR_AD-7.0인증시험패스는 보장합니다. 만약 떨어지셨다면 우리는 덤프비용전액을 환불해드립니다.
질문 # 28
What specific action does FortiEDR take when the Zero Trust Device Tagging playbook is activated?
(Choose one answer)
정답：B
설명：
The correct answer is C.
The FortiEDR 7.0.0 Administration Guide explains that Identity Management integration can use FortiClient EMS. The connector requires API credentials or FortiCloud credentials depending on whether FortiClient EMS is on-premises or cloud-based. The guide states that for the out-of-the-box action, such as Zero Trust device tagging on FortiClient EMS, FortiEDR tags the device as non-trusted in the identity management system and specifies the classification tag to apply in the Tag name field.
The guide also lists predefined FortiClient EMS 7.2 or later fabric tags used by FortiEDR, including FortiEDR_Malicious, FortiEDR_PUP, FortiEDR_Suspicious, FortiEDR_Likely_Safe, and FortiEDR_Probably_Good. These tags are used by FortiClient EMS to tag the endpoint based on FortiEDR classification.
Finally, the guide states that to configure the automated response, the administrator must go to Security Settings > Playbooks, open the relevant Playbook policy, and place a checkmark in the relevant classification column next to the Zero Trust device tagging row under Remediation. FortiEDR is then configured to automatically tag a device as non-trusted when a security event is triggered.
Options A, B, and D are wrong. FortiEDR does not remove unmanaged endpoints, does not apply a default tag to every endpoint, and does not disable the endpoint merely until a tag is assigned. The action is API- based FortiClient EMS tagging tied to FortiEDR event classification
질문 # 29
Refer to the exhibits.
You are attempting to move a collector into the High Security Collector Group for isolation but encounter an error in the API request as shown in the exhibit. To successfully isolate the collector, which API parameter must you correct? (Choose one answer)
정답：A
설명：
The correct answer is A. Set the organization parameter to Default .
From the first exhibit, the API query result for the Collector shows:
* Collector name: Desktop-PC
* Collector group name: Engineering
* Organization: Default
* State: Running
But in the second exhibit, the API request is using:
* organization = Fortinet-Training
* collectors = Desktop-PC
* targetCollectorGroup = High Security Collector Group
That organization value is wrong. The Collector belongs to the Default organization, so the API request must reference the Collector's actual organization. Otherwise FortiEDR cannot locate or move that Collector under the organization specified in the request.
The FortiEDR guide confirms that Collector Groups are used to assign different FortiEDR policies to different Collectors, and that Collectors can be moved between groups/organizations in the Inventory workflow. In Hoster view, FortiEDR shows Collectors from all organizations and allows moving Collectors between organizations, but the organization context must match the Collector being managed.
Option B is wrong because the exhibit shows the API request is authorized; the failure is a 400 Bad Request , not an authentication failure. Option C is wrong because the endpoint shown is already a move/update operation using PUT, and the issue is not the HTTP method. Option D is wrong because Engineering is the current Collector Group. The goal is to move the Collector to High Security Collector Group , so changing the target back to Engineering would not isolate or harden the Collector.
=========
질문 # 30
Refer to the exhibit.
Based on the event shown in the exhibit, which two statements about the event are true? (Choose two answers)
정답：A,C
설명：
The correct answers are B and C .
The exhibit shows the event classification as Malicious . In FortiEDR, event classification can be performed by the Core and later updated by FortiEDR Cloud Service (FCS) . The guide states that the audit history shows the classification chronology and includes details when FCS reclassifies a security event after the Core' s initial classification. It also states that notifications can be based on either Core or FCS classification depending on whether FCS classification is received within the timeout period.
The exhibit also shows TestApplication.exe with Status: Running . That means the process was launched and is currently running on the endpoint. Therefore, C is correct.
Option A is wrong because the exhibit clearly shows Status: Unhandled , not Handled. The guide states that FortiEDR security events are initially marked as unread and unhandled, and users can later mark them handled through the incident handling workflow.
Option D is wrong because the exhibit shows rule indicators such as Invalid Checksum , Suspicious Packer
, and Writable Code , but it does not prove that TestApplication.exe is "sophisticated malware." FortiEDR classifies the event as malicious, but the guide's Malicious classification means the event is verified to have malicious capability, is intended to harm the infected device, and has no commercially viable use; the exhibit alone does not justify the stronger claim "sophisticated malware."
=========
질문 # 31
Refer to the exhibit:
You are asked to block applications based on hash attributes. Which two factors must you consider when applying the hash value? (Choose two answers)
정답：B,C
설명：
The FortiEDR 7.0.0 Administration Guide states that when manually adding applications to be blocked, you can define the application using Hash or using any combination of File Name / Path / Signer attributes. This means hashes can be used independently and do not require filename, path, or signer attributes.
The guide also states that each hash is a unique identifier of an individual application, and the exhibit itself shows the hash field note: "SHA-1 or SHA-2 or MD5." Therefore, the hash must use a supported hash format, making D correct.
For multiple hash entries, the uploaded guide text says they must be comma separated , while the exhibit note says "You can enter multiple hashes comma separated." So the technically exact guide wording supports comma separation, not line separation. However, given your answer choices, A is clearly trying to test the requirement that multiple hashes must be separated correctly. The option wording says "line- separated," which is not exact against the guide; the better wording would be comma-separated . Since no
"comma-separated" option is provided, A is the intended separation-related answer, but the wording is flawed.
Option B is definitely wrong because hash mode is an alternative to attributes. Option C is also not the best answer because, although each hash uniquely identifies a file/application variant, the operational requirement is not that "hashes must be unique to each application" in the way the option implies. Hashes may represent different variants of the same application.
질문 # 32
Refer to the exhibit:
You are asked to block applications based on hash attributes. Which two factors must you consider when applying the hash value? (Choose two answers)
정답：B,C
설명：
The FortiEDR 7.0.0 Administration Guide states that when manually adding applications to be blocked, you can define the application using Hash or using any combination of File Name / Path / Signer attributes. This means hashes can be used independently and do not require filename, path, or signer attributes.
The guide also states that each hash is a unique identifier of an individual application, and the exhibit itself shows the hash field note: "SHA-1 or SHA-2 or MD5." Therefore, the hash must use a supported hash format, making D correct.
For multiple hash entries, the uploaded guide text says they must be comma separated , while the exhibit note says "You can enter multiple hashes comma separated." So the technically exact guide wording supports comma separation, not line separation. However, given your answer choices, A is clearly trying to test the requirement that multiple hashes must be separated correctly. The option wording says "line- separated," which is not exact against the guide; the better wording would be comma-separated . Since no
"comma-separated" option is provided, A is the intended separation-related answer, but the wording is flawed.
Option B is definitely wrong because hash mode is an alternative to attributes. Option C is also not the best answer because, although each hash uniquely identifies a file/application variant, the operational requirement is not that "hashes must be unique to each application" in the way the option implies. Hashes may represent different variants of the same application.
질문 # 33
......
Pass4Tes가 제공하는 제품을 사용함으로 여러분은 IT업계하이클래스와 멀지 않았습니다. Pass4Tes 가 제공하는 인증시험덤프는 여러분을Fortinet인증NSE6_EDR_AD-7.0시험을 안전하게 통과는 물론 관연전업지식장악에도 많은 도움이 되며 또한 우리는 일년무료 업뎃서비스를 제공합니다.
NSE6_EDR_AD-7.0자격증참고서: https://www.pass4test.net/NSE6_EDR_AD-7.0.html