Die Fragenkataloge zur die Microsoft AZ-802 Zertifizierungsprüfung von EchteFrage können den Kandidaten helfen, viel Zeit und Energie zu sparen. Auf diese Weise können Sie beim Bestehen der Microsoft AZ-802 Zertifizierungsprüfung bessere Resulate mit wenigerem Einsatz erzielen. Nachdem Sie unsere Prüfungsfragen und Antworten gekauft haben, werden wir Ihnen einjähriger Aktualisierung umsonst anbieten. Wir versprechen Ihnen, dass wir Ihnen eine volle Rückerstattung bedingungslos geben werden, entweder die gekauften Prüfungsmaterialien Qualitätsproblem haben, oder Sie die Microsoft AZ-802 Zertifizierungsprüfung nicht bestehen.
| Section | Weight | Objectives |
|---|---|---|
| Topic 1: Manage Windows Servers and workloads in a hybrid environment | 20% | - Implement hybrid identity solutions - Manage updates and patches across hybrid servers - Configure remote management and secure administration - Deploy servers using Windows Admin Center and Azure Arc |
| Topic 2: Manage virtual machines and containers | 15% | - Configure Azure Arc-enabled servers and VMs - Deploy and manage containers and Kubernetes on Windows Server - Deploy and manage Hyper-V virtual machines |
| Topic 3: Secure Windows Server on-premises and hybrid infrastructures | 10% | - Configure Windows Defender and audit policies - Implement security baselines and hardening - Manage access control and permissions |
| Topic 4: Implement and manage an on-premises and hybrid networking infrastructure | 15% | - Secure network traffic in hybrid environments - Configure IP addressing, DNS, and DHCP - Implement hybrid network connectivity - Configure software-defined networking |
| Topic 5: Manage storage and file services | 15% | - Integrate on-premises storage with Azure Storage - Configure file servers and shares - Configure data deduplication and replication - Implement Storage Spaces and Storage Spaces Direct |
| Topic 6: Deploy and manage Active Directory Domain Services (AD DS) in on-premises and cloud environments | 20% | - Manage FSMO roles and replication - Install and configure domain controllers - Integrate AD DS with Azure AD and Azure Arc - Implement and manage Group Policy Objects |
| Topic 7: Implement high availability and disaster recovery | 5% | - Monitor and troubleshoot Windows Server environments - Implement backup and recovery solutions - Configure failover clustering - Use Azure Site Recovery for hybrid workloads - Perform server and workload migrations |
>> AZ-802 Fragen Beantworten <<
Microsoft AZ-802 Dumps von EchteFrage sind ganz gleich wie die richtigen Zertifizierungsprüfungen. Die beinhalten alle Prüfungsfragen und Testantworten in aktueller Prüfung. Und die Software-Version simuliert die gleiche Atmosphäre der aktuellen Prüfungen. Bei der Nutzung der EchteFrage Dumps, können Sie ganz sorglos die Microsoft AZ-802 Prüfung ablegen und sehr gute Note bekommen.
465. Frage
Your network contains a single domain Active Directory Domain Services (AD DS) forest named contoso.
com. The forest contains a single Active Directory site.
You plan to deploy a read only domain controller (RODC) to a new datacenter on a server named Server1. A user named User1 is a member of the local Administrators group on Server1.
You need to recommend a deployment plan that meets the following requirements:
Ensures that a user named User1 can perform the RODC installation on Server1 Ensures that you can control the AD DS replication schedule to the Server1 Ensures that Server1 is in a new site named RemoteSite1 Uses the principle of least privilege Which three actions should you recommend performing in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Antwort:
Begründung:
Explanation:
1. Create a site and a subnet (RemoteSite1, associated with the datacenter ' s IP subnet). 2. Create a site link (connecting RemoteSite1 to the existing site, with the desired schedule/cost). 3. Pre-create an RODC account (delegating its installation to User1).
Because Server1 must end up in a brand-new site, the plan must begin by creating that site along with a subnet object mapped to the datacenter ' s IP range and associated with the new site, which is exactly what places Server1 in RemoteSite1 once it is promoted there. Next, to be able to control the replication schedule between RemoteSite1 and the rest of the forest, an administrator must create a dedicated site link, since replication timing, frequency, and cost between sites are properties of the site link object, not of the sites themselves; without an explicit site link (or by relying only on a shared default link), that granular scheduling control would not exist for this specific site pair. Finally, to satisfy least privilege while still letting User1 - a mere local administrator on Server1, not a domain administrator - complete the RODC promotion, the recommended practice is to pre-create (stage) the RODC computer account in advance and explicitly delegate the installation to User1 during that staging process. This lets User1 attach Server1 to the pre-created account and finish the promotion locally without ever needing domain-wide administrative rights. Running the AD DS installation wizard directly as a non-delegated local admin would fail without domain credentials, and adding User1 to the Contoso\Administrators (Domain Admins) group would grant far more access than necessary, violating least privilege. The correct order is: create the site and subnet, create the site link, then pre-create the RODC account.
466. Frage
Your network contains an Active Directory Domain Services (AD DS) domain. The domain contains the servers shown in the following table.
The Failover Clustering tools are NOT installed on the servers.
You plan to enable Cluster-Aware Updating (CAU).
On which servers should you install the Failover Clustering tools to implement CAU in self-updating mode, and on which servers should you install the Failover Clustering tools to implement remote-updating mode? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Exhibit
Antwort:
Begründung:
Explanation:
Self-updating mode runs Cluster-Aware Updating as a highly available clustered role that is hosted directly on the cluster it is updating, which means the Cluster-Aware Updating clustered role and the Failover Clustering Tools it depends on must be installed on the cluster ' s own member nodes, which in this scenario are Node1 and Node2, since self-updating mode has no external coordinating computer and instead runs the update orchestration from within the cluster itself. Remote-updating mode works in the opposite way architecturally:
it specifically requires that the computer coordinating and triggering the update run NOT be a member of the failover cluster being updated, so in this scenario the Failover Clustering Tools must instead be installed on Server1, which is an independent member server that has network connectivity to Cluster1 but is not one of its nodes, so it can safely coordinate updates against the cluster from the outside. This architectural split, tools on the cluster ' s own nodes for self-updating mode versus tools on an external, non-member computer for remote-updating mode, reflects the fundamental difference in where the update orchestration engine actually runs between the two CAU modes as documented by Microsoft, and it is what determines the correct answer for each half of this question.
467. Frage
You have two servers named Host1 and Host2 that run Windows Server 2022 and are members of a workgroup named Contoso. Both servers have the Hyper-V server role installed and are identical in hardware and configuration. Host1 contains three virtual machines. Each server is located in a separate site that connects by using a high-speed WAN link. You need to replicate the virtual machines from Host1 to Host2 for a disaster recovery solution. Which three actions should you perform? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.
Antwort: B,E,F
Begründung:
Because Host1 and Host2 are members of a workgroup rather than joined to an Active Directory domain, Kerberos authentication cannot be used for Hyper-V Replica, since Kerberos fundamentally depends on domain trust relationships that do not exist between workgroup-joined machines. In a workgroup or cross- domain scenario, Hyper-V Replica instead requires certificate-based authentication over HTTPS, together with opening the associated TCP port exceptions in the Windows Firewall so that replication traffic between the two hosts is permitted. Before any virtual machine can be replicated to Host2, that server must first be configured and explicitly enabled as a Replica server, since a Hyper-V host does not accept incoming replication traffic by default. Once Host2 is enabled as a Replica server and certificate-based authentication with the necessary firewall exceptions is in place, replication is then turned on individually for each of the three virtual machines on Host1 by running the Enable Replication wizard against each one. Live Migration is an unrelated high-availability feature used to move a running virtual machine between cluster nodes without downtime, and it plays no role in establishing Hyper-V Replica for disaster recovery, so enabling live migration is not one of the required actions.
468. Frage
You deploy Azure Migrate to an on-premises network. You have an on-premises physical server named Server1 that runs Windows Server and has the following configuration: Operating system disk 600 GB, Data disk 3 TB, NIC Teaming: Enabled, Mobility service: installed, Windows Firewall: Enabled, Microsoft Defender Antivirus: Enabled. You need to ensure that you can use Azure Migrate to migrate Server1.
Solution: You disable Microsoft Defender Antivirus on Server1. Does this meet the goal?
Antwort: B
Begründung:
Microsoft Defender Antivirus running on the source server is not a documented blocker for Azure Migrate ' s agent-based, Mobility-service physical server migration, so disabling it addresses nothing on Azure Migrate ' s actual current support-matrix requirements for Server1. Reviewing Server1 ' s full configuration against that support matrix, the operating system disk at 600 GB and the data disk at 3 TB are both comfortably within the documented 2 TB or 4 TB OS disk limits and the 32 TB data disk limit respectively, and neither the Windows Firewall state nor the Microsoft Defender Antivirus state appears anywhere in the documented list of unsupported source configurations at all. The configuration detail that Azure Migrate ' s physical server migration support matrix does flag as unsupported is the enabled NIC teaming on Server1, and disabling antivirus protection does nothing to change that networking configuration. Because the antivirus state was never actually the blocking factor, and the real blocker -- NIC teaming -- remains enabled and unaddressed after this solution is applied, disabling Microsoft Defender Antivirus on Server1 does not meet the stated goal.
469. Frage
You have a Hyper-V failover cluster named Cluster1 that uses a cloud witness. Cluster1 hosts a virtual machine named VM1 that runs Windows Server. You need to fail over VM1 automatically to a different node when a service named Service1 on VM1 fails. What should you do on Cluster1 and VM1? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.
Antwort:
Begründung:
Explanation:
On Cluster1: Configure monitoring of the VM1 cluster role. On VM1: Configure the Recovery settings of Service1.
Failover Clustering ' s virtual machine monitoring feature lets the cluster watch the health of a specific Windows service running inside a guest virtual machine and take corrective action -- up to and including failing the VM over to another node -- when that service repeatedly fails. Enabling this requires two coordinated configuration steps on two different sides. On Cluster1, an administrator selects " Configure Monitoring " on the VM1 cluster role in Failover Cluster Manager (or runs Add-ClusterVMMonitoredItem) and chooses Service1 as the specific service to monitor, which is what actually enables the cluster ' s health- detection integration to watch that service and react when it fails. Inside the guest, on VM1, Service1 ' s own Recovery tab in the Services console must be configured so that its failure actions notify the operating system on failure, which is the signal the cluster ' s monitoring integration component relies on to detect that the service has actually failed. Configuring the Startup Type alone, or the Startup and Recovery settings together without specifically enabling the failure-notification behavior, does not provide the cluster with the signal it needs, and installing the Azure Monitor agent is unrelated to in-guest service monitoring for cluster failover.
Both configuration steps together are required for the desired automatic failover behavior to work.
470. Frage
......
Um die Microsoft AZ-802 Zertifizierungsprüfung zu bestehen, wählen Sie doch unseren EchteFrage. Sie werden sicher nicht bereuen, dass Sie mit so wenigem Geld die Prüfung bestehen können. Unser EchteFrage wird Ihnen helfen, sich auf die Prüfung gut vorzubereiten und die Microsoft AZ-802 Zertifizierungsprüfung (Administering Windows Server) erfolgreich zu bestehen. Außerdem bieten wir Ihnen kostenlos einen einjährigen Update-Service.
AZ-802 Kostenlos Downloden: https://www.echtefrage.top/AZ-802-deutsch-pruefungen.html