ご存知のように、すべての受験者は、知識とスキルを示すための最良の証拠となる関連するCiscoの300-110認定を取得する場合、試験に合格する必要があります。 準備プロセスを簡素化する場合は、良いニュースがあります。 300-110試験問題は、多くの国のすべてのJpshikenお客様から高く評価されており、当社はこの分野のリーダーになっています。 300-110試験問題は、300-110試験に合格するために非常に正確です。 300-110実践ガイドを購入すると、高いDesigning Cisco Wireless Networks合格率が得られます。
| Section | Weight | Objectives |
|---|---|---|
| Topic 1: WLAN High Availability | 20% | - Design controller high availability - Design AP high availability |
| Topic 2: Mobility | 25% | - Optimize client roaming - Validate mobility tunneling - Design mobility groups - Site Tags |
| Topic 3: Wireless Site Survey | 25% | - Material attenuation and its design effects - Planning tools and network metrics evaluation - Collect design requirements and evaluate constraints - Layer 1 site survey analysis - Predictive site survey - Post-deployment site survey - Pre-deployment site survey |
| Topic 4: Wired and Wireless Infrastructure | 30% | - Design wireless bridging (mesh) - Logical infrastructure requirements - Design high-density wireless networks - Design for data, voice, video, location - Physical infrastructure requirements - Design radio management |
大方の人は成功への近道がないとよく言われますけど、IT人材にとって、私達の300-110問題集はあなたの成功へショートカットです。Jpshikenの300-110問題集を通して、他の人が手に入れない資格認証を簡単に受け取ります。早めによりよい仕事を探しできて、長閑な万元以上の月給がある生活を楽しみます。
質問 # 26
A network engineer is deploying Cisco 9130I APs on multiple Cisco Catalyst 9800-80 WLCs with Cisco Catalyst Center. The engineer must enable Cisco AI Analytics and location analytics to use the RRM features to automatically manage the WLC RF profiles. Which type of license must be used on Cisco Catalyst Center?
正解：B
解説：
Cisco Catalyst Center ' s AI-driven network management capabilities - including AI Analytics, AI-Enhanced RRM (Radio Resource Management), location analytics (DNA Spaces integration), and automated RF profile management - are exclusively available under the Catalyst Advantage license tier. The Advantage tier builds upon the Essentials tier and adds access to the full suite of AI/ML-powered assurance and optimization features. Specifically, AI-Enhanced RRM leverages machine learning models trained on historical RF telemetry to predict and prevent RF issues, dynamically adjust channel and power assignments, and automate RF profile selection - capabilities that cannot be activated without the Advantage license. Location analytics through Catalyst Center integrates with Cisco Spaces to provide real-time client location tracking, asset tracking, and spatial analytics. Catalyst Essentials (Option C) provides basic device management, software image management, and network plug-and-play provisioning - it does not include AI Analytics or advanced RRM automation. Right-To-Use (Option B) is a legacy licensing model not applicable to Catalyst Center.
SNTC SmartNet (Option D) is a support and maintenance contract, not a software feature license. Reference:
WLSD Study Guide - Cisco Catalyst Center Licensing, AI-Enhanced RRM, Catalyst Advantage Feature Set.
質問 # 27
A customer wants to provide wireless coverage in a parking lot outside of a building. An engineer determines that three APs are required. The APs can be mounted on the light poles in the parking lot because there are cable routes already in place for these locations. The closest wiring closet is approximately 200 meters away. Which setup powers and connects the APs back to the customer network?
正解：C
解説：
This question hinges on a fundamental network engineering constraint: the maximum transmission distance of copper Ethernet cabling. IEEE 802.3 standards specify a maximum segment length of 100 meters (328 feet) for all standard PoE and Ethernet over Category 5e, 6, or 6A UTP copper cabling. The parking lot light poles are approximately 200 meters from the closest wiring closet -- more than double the maximum copper distance. This immediately eliminates Options A and D, which specify Category 6 UTP cabling: at 200 meters, UTP copper cannot reliably carry Ethernet at any supported speed, and PoE cannot be delivered over this distance regardless of standard. The correct solution is fiber optic connectivity between the wiring closet and the parking lot, combined with a local AC/DC power module at each pole location.
Fiber optic cabling supports single-mode runs of kilometers and multi-mode runs of hundreds of meters at Gigabit speeds -- easily spanning 200 meters. At the AP mounting location on the light pole, an AC/DC power module (powered from the pole's existing electrical supply) converts AC power to the DC power the AP requires. Option B (fiber with 802.3af) is incorrect because PoE cannot be delivered over fiber -- 802.3af requires copper cabling for simultaneous power and data delivery.
質問 # 28
An engineer is finalizing the design for a WLAN dedicated to wireless VoIP handsets. Which setting should be applied to this WLAN, and why?
正解：A
解説：
Band Select works by suppressing 2.4 GHz probe responses to dual-band capable clients, deliberately withholding replies so the client is nudged toward discovering the 5 GHz radio instead. That suppression introduces delay into the probe and discovery process, which is harmless for a laptop associating once at the start of the day but damaging for a handset attempting to find a roam target while a call is in progress. Cisco's guidance is therefore to disable Band Select on voice WLANs and instead steer handsets to 5 GHz through client configuration or by not enabling the SSID on 2.4 GHz at all. Client Load Balancing should also be disabled on voice WLANs for the same class of reason - it rejects association attempts to encourage the client toward a different AP, which can block a roaming handset from joining the AP it actually needs. Passive Client mode addresses devices that do not send traffic until polled, such as certain industrial controllers, and is unrelated to handset roaming.
質問 # 29
A customer has a Cisco wireless network with two Cisco Catalyst 9800 Series WLCs in a high availability cluster, 50 Cisco 2800I APs, and all SSIDs and services are 5 GHz only. A security mandate requires that rogue APs be scanned and identified in 2.4 GHz and 5 GHz bands without impacting existing client connectivity. How must the wireless network be reconfigured to meet the requirement without purchasing additional APs?
正解：B
解説：
The Cisco Aironet 2800 Series APs feature a dual-radio architecture with a dedicated 5 GHz radio (slot 1) and a Flexible Radio Assignment (XOR) radio (slot 0) that can operate in either 2.4 GHz or 5 GHz, or be assigned to monitor mode for scanning functions. Since all existing SSIDs and services are 5 GHz only, the slot 1 (dedicated 5 GHz) radio is responsible for all current client connectivity -- it must remain in Client Serving mode to maintain uninterrupted 5 GHz WLAN service. The XOR radio (slot 0), currently either idle or operating as a secondary 5 GHz radio, can be repurposed without impacting client service. Setting the XOR radio to Monitor mode enables it to continuously scan all channels across both the 2.4 GHz and 5 GHz spectrum for rogue AP detection, using the embedded CleanAir and WIDS capabilities. In Monitor mode, the XOR radio operates full-time as a dedicated scanner, providing rogue detection coverage on 2.4 GHz (previously uncovered since all services were 5 GHz) and supplementary scanning on 5 GHz.
This eliminates the need for additional dedicated monitor mode APs.
質問 # 30
A network engineer is configuring high availability on an access point. What is the maximum number of controllers that can be configured?
正解：B
解説：
When configuring high availability on a Cisco access point, the AP can be configured with a maximum of three controllers: a primary controller, a secondary controller, and a tertiary controller. This three- tier hierarchy defines the failover order -- the AP first attempts to join its primary controller, then the secondary if the primary is unavailable, and finally the tertiary if both the primary and secondary are unreachable. After exhausting all three configured options, the AP enters a discovery process to find any available controller. This three-controller configuration (primary, secondary, tertiary) allows network engineers to implement N+1 redundancy where critical APs can be directed to specific backup controllers in a deliberate sequence. Limiting the configuration to only 2 controllers (as stated in Option B which would be incorrect) would reduce redundancy options for environments with geographically distributed controllers requiring specific failover paths.
質問 # 31
......
近年、市場は資格試験の300-110学習製品の急増に悩まされているため、多くの類似製品で300-110テスト問題を見つけて選択することは非常に困難です。ただし、当社の300-110学習資料の優れた品質と評判により、多くの製品でユーザーが当社を選択できるようになると考えています。当社の学習資料では、ユーザーが300-110認定ガイドを無料で使用して、ユーザーが製品をよりよく理解できるようにしています。
300-110日本語認定: https://www.jpshiken.com/300-110_shiken.html