Why you should trust BraindumpsPrep? By trusting BraindumpsPrep, you are reducing your chances of failure. In fact, we guarantee that you will pass the NSE6_FNC_AD-7.6 certification exam on your very first try. If we fail to deliver this promise, we will give your money back! This promise has been enjoyed by over 90,000 takes whose trusted BraindumpsPrep. Aside from providing you with the most reliable dumps for NSE6_FNC_AD-7.6, we also offer our friendly customer support staff. They will be with you every step of the way.
| Section | Objectives |
|---|---|
| Deployment and Provisioning | - Configure security automation - Configure and monitor high availability (HA) - Configure FortiNAC-F security policies - Configure access control on FortiNAC-F |
| Network Visibility and Monitoring | - Use logging options available on FortiNAC - Troubleshoot network devices and device status - Guests and contractors - Explain and configure device profiling |
| Concepts and Initial Configuration | - Explain isolation networks and the configuration wizard - Model and organize infrastructure devices |
| Integration | - Explain and configure MDM integration - Integrate with third-party devices using Syslog and SNMP trap input - Configure and use FortiNAC-F Manager |
>> New NSE6_FNC_AD-7.6 Braindumps Free <<
Are you tired of preparing different kinds of exams? Are you stuck by the aimless study plan and cannot make full use of sporadic time? Are you still overwhelmed by the low-production and low-efficiency in your daily life? If your answer is yes, please pay attention to our NSE6_FNC_AD-7.6 guide torrent, because we will provide well-rounded and first-tier services for you, thus supporting you obtain your dreamed NSE6_FNC_AD-7.6 certificate and have a desired occupation. We can say that our NSE6_FNC_AD-7.6 test questions are the most suitable for examinee to pass the exam, you will never regret to buy it.
NEW QUESTION # 75
Refer to the exhibit.
When a contractor account is created using this template, which value is set in the accounts Role field?
Answer: B
Explanation:
The correct answer is A . In the exhibit, the Template Name is Engineer-Contractor , and the selected Role option is Use a unique Role based on this template name . That means FortiNAC-F uses the template name itself as the role value for any account created from this guest/contractor template. The study guide confirms this behavior: by default, the Role field is populated with the template name, although the administrator can alternatively select from an existing role list. It also states that the role value in the guest and contractor template populates the Role field of any account created from that template.
Option B , Eng-Contractor , is wrong because that value is entered in the Security and Access Value field, not the Role field. That value can still be used in user/host profiles or policies, but it does not populate the account Role field. Option C , Contractor , is only the Visitor Type , which controls the kind of guest
/contractor account and associated icon behavior. Option D , Accounting Contractor , is visible in the disabled Select Role dropdown, but that option is not selected because the template is configured to use a unique role based on the template name.
NEW QUESTION # 76
When configuring FortiNAC-F to manage FortiGate VPN users, an endpoint compliance policy must be created for the integration.
Why is the endpoint compliance policy necessary for this type of integration?
Answer: C
Explanation:
The integration of FortiNAC-F withFortiGate VPNrequires a specific policy workflow to bridge the gap between initial user authentication and full network access. When a user connects to the VPN, the FortiGate typically provides the User ID and IP address, but FortiNAC-F requires aMAC addressto uniquely identify and manage the endpoint ' s record.
According to theFortiGate VPN Integration Guide, theEndpoint Compliance Policyis a mandatory component of this setup because it is used todesignate the required agent type. Because a VPN connection is Layer 3, FortiNAC cannot " see " the MAC address through traditional SNMP or L2 polling. The compliance policy instructs the system to present aCaptive Portalto the remote user, requiring them to download and run either thePersistentorDissolvable Agent. The agent then reports the device ' s MAC address back to FortiNAC, allowing the system to correlate the VPN session with a host record.
Once the agent is running and the MAC is known, FortiNAC-F can evaluate the device ' s security posture (if scanning is configured) and send the necessaryFSSO tagsback to the FortiGate to lift the initial network restrictions. Without the compliance policy to enforce the agent requirement, the connection would remain in an isolated " IP-only " state with no unique hardware identity.
" TheEndpoint Compliance Policyis necessary to control the agent requirement for VPN users. Create a default VPN Endpoint Compliance Policy todistribute an agentvia captive portal for isolated machines. This policy allows the administrator todesignate the required agent type(Persistent or Dissolvable) that will be used to collect the hardware (MAC) address and perform health scans on the remote endpoint. " -FortiNAC FortiGate VPN Integration Guide: Default Endpoint Compliance Policy (Optional) Section.
NEW QUESTION # 77
Refer to the exhibits.
An administrator is troubleshooting visibility issues on a modeled switch The switch is configured to use link traps and to provision hosts based on network access policies. The administrator is seeing hosts on ports with no hosts connected and not seeing hosts on ports where hosts are known to be connected.
What is the most likely cause?
Answer: A
Explanation:
The correct answer is C . In a link-trap-based wired deployment, the switch sends a linkUp or linkDown SNMP trap to FortiNAC-F, but that trap does not contain the endpoint MAC address. After receiving the link trap, FortiNAC-F must contact the switch and perform a Layer 2 poll to read the forwarding table and determine which MAC address was added or removed on the port. The FortiNAC-F study guide states that link traps trigger FortiNAC-F to perform a Layer 2 poll to update its awareness of devices connected to the edge device, and the wired link-trap workflow specifically shows FortiNAC-F performing a Layer 2 poll before locating the host record and provisioning access.
The symptoms in the exhibit are classic stale Layer 2 visibility: FortiNAC-F still shows a rogue host on a port where no host is connected, while also failing to show hosts on ports where endpoints are actually connected.
That means FortiNAC-F is not successfully refreshing the switch MAC table information. Since link traps depend on FortiNAC-F being able to poll the switch after the trap, a contact failure with the modeled switch is the most likely cause.
Option A is wrong because logical network settings affect access enforcement, not whether FortiNAC-F can see current MAC-to-port mappings. Option B is wrong because the FortiNAC-F agent is not required for basic switch-port visibility; Layer 2 visibility comes from switch polling, MAC notification traps, or RADIUS. Option D is tempting, but the broader failure shown here is not merely a policy or endpoint-side issue-it is that FortiNAC-F cannot obtain current Layer 2 data from the switch. In practice, you would still verify SNMP/CLI credentials while troubleshooting, but the best answer to the symptom pattern is that FortiNAC-F cannot contact/query the switch successfully.
NEW QUESTION # 78
Refer to the exhibit.
Which devices are automatically evaluated by these device profiling rules?
Answer: B
Explanation:
The profiling rules are configured with automatic registration and rely on vendor OUI and location methods. These rules evaluate devices when they are first identified as rogues and added to the database, at which point profiling determines whether they should be registered as devices.
NEW QUESTION # 79
Refer to the exhibit. An administrator has configured the DHCP scope for a registration isolation network, but the isolation process isn't working.
What is the problem with the configuration?
Answer: A
Explanation:
In a FortiNAC-F deployment, the configuration of the DHCP scope for isolation networks (Registration, Remediation, etc.) must perfectly align with the underlying network infrastructure to ensure that isolated hosts can communicate with the FortiNAC appliance. In the provided exhibits, there is a clear discrepancy between the DHCP configuration and the Network Topology.
As shown in the "Network Topology" exhibit, the Registration Network resides on a router interface (or sub-interface) with the IP address 192.168.180.1. This address represents the default gateway for any host placed into the Registration VLAN. However, the "DHCP configuration" exhibit shows the scope "REG-ScopeOne" configured with a Gateway of
10.0.1.254. This 10.0.1.254 address belongs to the management/service network (port2 of FortiNAC), not the registration subnet. If a host in the Registration VLAN receives this incorrect gateway via DHCP, it will attempt to send all off-link traffic to an unreachable IP, preventing it from loading the Captive Portal or communicating with the FortiNAC server.
According to the FortiNAC-F Configuration Wizard Reference, when defining a Layer 3 network scope, the "Gateway" field must contain the IP address of the router interface that acts as the gateway for that specific isolation VLAN. The FortiNAC appliance itself usually sits on a different subnet, and traffic is directed to it via the router's DHCP Relay (IP Helper) and DNS redirection.
"When configuring scopes for a Layer 3 network, the Gateway value must be the IP address of the router interface for that subnet. This allows the host to reach its local gateway to route traffic.
If the gateway is misconfigured, the host will be unable to reach the FortiNAC eth1/port2 interface for registration... Ensure the Gateway matches the network topology for the isolation VLAN."
NEW QUESTION # 80
......
Everyone has their own characteristics when they start to study our NSE6_FNC_AD-7.6 exam questions. In order for each user to find a learning method that suits them, we will provide you with a targeted learning version and study plan. There are three versions of the NSE6_FNC_AD-7.6 Practice Engine for you to choose: the PDF, Software and APP online. And further more, we have free demos of the NSE6_FNC_AD-7.6 learning guide on the website for you to download before you make the purchase.
NSE6_FNC_AD-7.6 Valid Exam Preparation: https://www.briandumpsprep.com/NSE6_FNC_AD-7.6-prep-exam-braindumps.html