P.S. Free & New NSE5_FNC_AD_7.6 dumps are available on Google Drive shared by Prep4sureGuide: https://drive.google.com/open?id=1AzrCRN2Cr-IWEtcy_ilcsvMTe3SvLFeu
It is important to mention here that the Fortinet NSE 5 - FortiNAC-F 7.6 Administrator practice questions played important role in their Fortinet NSE5_FNC_AD_7.6 Exams preparation and their success. So we can say that with the Fortinet NSE5_FNC_AD_7.6 exam questions you will get everything that you need to learn, prepare and pass the difficult Fortinet NSE5_FNC_AD_7.6 exam with good scores. The Prep4sureGuide NSE5_FNC_AD_7.6 Exam Questions are designed and verified by experienced and qualified Fortinet NSE5_FNC_AD_7.6 exam trainers. They work together and share their expertise to maintain the top standard of Fortinet NSE5_FNC_AD_7.6 exam practice test. So you can get trust on Fortinet NSE5_FNC_AD_7.6 exam questions and start preparing today.
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
>> NSE5_FNC_AD_7.6 Latest Exam Question <<
As you all know that practicing with the wrong preparation material will waste your valuable money and many precious study hours. So you need to choose the most proper and verified preparation material with caution. Preparation material for the NSE5_FNC_AD_7.6 exam questions from Prep4sureGuide helps to break down the most difficult concepts into easy-to-understand examples. Also, you will find that all the included questions are based on the last and updated NSE5_FNC_AD_7.6 Exam Dumps version. We are sure that using Prep4sureGuide's Fortinet Exam Questions preparation material will support you in passing the NSE5_FNC_AD_7.6 exam with confidence.
NEW QUESTION # 49
A user was attempting to register their host through the registration captive portal. After successfully registering, the host remained in the registration VLAN. Which two conditions would cause this behavior?
(Choose two.)
Answer: A,B
Explanation:
The process of moving a host from aRegistration VLANto aProduction VLAN(Access VLAN) is a fundamental part of the FortiNAC-F " VLAN steering " workflow. When a host successfully registers via the captive portal, FortiNAC-F evaluates its Network Access Policies to determine the correct VLAN. If the host remains stuck in the Registration VLAN despite a successful registration, it is typically due to port-level restrictions or the presence of other unregistered devices.
The two most common reasons for this behavior as per the documentation are:
The port default VLAN is the same as the Registration VLAN:If the " Default VLAN " field in the switch port
' s model configuration is set to the same ID as the Registration VLAN, the port will not change state because FortiNAC-F believes it is already in its " normal " or " forced " state.
There is another unregistered host on the same port:FortiNAC-F maintains the security posture of the physical port. If multiple hosts are connected to a single port (e.g., via a hub or unmanaged switch) and at least one host remains " Rogue " (unregistered), FortiNAC-F will generally keep the entire port in the isolation
/registration VLAN to prevent the unregistered host from gaining unauthorized access to the production network.
Issues with agents (A, B) typically prevent a host from completing compliance or registration but do not usually result in a " stuck " statusafterregistration has already been marked as successful in the system.
" If a port is identified as havingMultiple Hosts, and those hosts require different levels of access, FortiNAC remains in the most restrictive state (Registration or Isolation) until all hosts on that port are authorized...
Additionally, verify theDefault VLANsetting for the port; if the Default VLAN and Registration VLAN match, the system will not trigger a VLAN change upon registration. " -FortiNAC-F Administration Guide:
Troubleshooting Host Management.
NEW QUESTION # 50
Refer to the exhibit.
Which devices are automatically evaluated by these device profiling rules?
Answer: C
Explanation:
The correct answer is A . In FortiNAC-F, device profiling rules are used primarily to classify unknown or untrusted devices when they are first discovered. The study guide explains that when a device does not already exist in the database, FortiNAC-F adds it, treats it as a rogue, and evaluates it against enabled device profiling rules. It also states that devices are initially evaluated against device profiling rules only if they do not already exist in the database, because this avoids unnecessary repeated evaluation of known devices.
The exhibit also matters: the rules are enabled and set to Automatic registration, but Confirm Rule On Connect is not enabled and Confirm Rule Interval is set to None . That means FortiNAC-F will not automatically revalidate already-profiled or trusted devices every time they connect. Option B is wrong because trusted devices are not repeatedly evaluated unless rule confirmation is configured. Option C is too broad because all hosts are not processed through profiling rules on every connection. Option D is also wrong because changing location does not by itself force automatic device profiling; location can be used as a rule method, but the automatic evaluation described here applies when the rogue device is initially added to the database.
NEW QUESTION # 51
Refer to the exhibit.
What will happen to the host of a guest user created from this template if the time of connection is 8:00 PM?
Answer: A
Explanation:
In FortiNAC-F, theGuest & Contractor Templateis a configuration object that defines the parameters for accounts created by sponsors or through self-registration. One of the critical security controls within this template is theLogin Availabilitysetting. This setting restricts the specific days and times during which a guest or contractor is permitted to authenticate and access the network.
As shown in the exhibit, the " StandardGuest " template hasLogin Availabilityset to " Specify Time " , with a schedule defined asMon-Fri, 6:00 AM to 7:00 PM. If a guest user attempts to connect or authenticate at8:00 PM, which is outside of the permitted window, FortiNAC-F ' s policy engine will automatically deny the authentication request. When an authentication attempt is denied due to schedule restrictions, the system does not move the host into the " Authenticated " or " Registered " state required for production access. Instead, the host ismarked as non-authenticatedin the adapter or host view.
This behavior ensures that even if a guest possesses valid credentials, their access is strictly bound by the organizational policy for visitor hours. The host will typically remain in its current isolation or registration VLAN, and the user will see a message on the captive portal indicating that their account is not currently authorized for login. It is important to distinguish this from " at-risk " (C), which relates to security scan failures, or " rogue " (B), which typically refers to unknown devices that have not yet been associated with a valid account or profiling rule.
" Login Availabilitydefines the timeframe during which the guest or contractor account is valid for network access. This schedule is enforced at the time of authentication. If a user attempts to log in outside of the designated window, the authentication is rejected by the system. Consequently, the host record will reflect anon-authenticatedstatus, and the device will remain restricted to the isolation or registration network until a valid login window is reached. " -FortiNAC-F Administration Guide: Guest and Contractor Templates Section.
NEW QUESTION # 52
Refer to the exhibit.
A FortiNAC-F N+1 HA configuration is shown.
What will occur if CA-2 fails?
Answer: B
Explanation:
In an N+1 High Availability (HA) configuration, a single secondary Control and Application (CA) server provides backup for multiple primary CA servers. The FortiNAC-F Manager (FortiNAC-M) acts as the centralized orchestrator for this cluster, monitoring the health of all participating nodes.
According to the FortiNAC-F 7.6.0 N+1 Failover Reference Manual, when a primary CA (such as CA-2 in the exhibit) fails, the secondary CA (CA-3) is automatically promoted by the Manager to take over the specific workload and database functions of that failed primary. Crucially, the documentation specifies that even after this promotion, the system architecture maintains its N+1 logic. The secondary CA effectively "assumes the identity" of the failed primary while continuing to operate within the N+1 framework established by the Manager.
It does not merge with CA-1 to form a traditional 1+1 active/passive cluster (A), nor does it engage in load balancing (D), as FortiNAC-F HA is designed for redundancy and failover rather than active traffic distribution. Furthermore, CA-3 does not "share" management with CA-1 (C); it independently handles the tasks originally assigned to CA-2. Throughout this failover state, the Manager continues to oversee the group, and CA-3 remains the designated secondary unit currently acting in a primary capacity for the downed node until CA-2 is restored.
"In an N+1 Failover Group, the Secondary CA is designed to take over the functionality of any single failed primary component within the group. The FortiNAC Manager monitors the primaries and initiates the failover to the secondary... Once failover occurs, the secondary continues to operate as the backup unit for the failed primary while remaining part of the managed N+1 HA configuration." - FortiNAC-F 7.6.0 N+1 Failover Reference Manual: Failover Behavior Section.
NEW QUESTION # 53
Two FortiNAC-F devices have been configured as a 1 + 1 HA pair. The primary server went offline and a successful failover to the secondary has occurred. What happens if the primary server comes back online?
Answer: D
Explanation:
The correct answer is A . In a FortiNAC-F 1+1 HA deployment, failover from primary to secondary is automatic, but failback to the primary is not automatic . The study guide states that if the primary device or its network connectivity fails, the secondary assumes control automatically, but restoration of a failed-over HA deployment is a manual administrator-driven process. It further explains that after the cause of the failover is resolved, the administrator must use the Resume Control button to transfer control back to the primary server.
That means when the primary comes back online, it does not immediately take over again. The pair can resume HA communication, but the secondary remains the in-control node until an administrator deliberately returns control to the primary. Option B is wrong because FortiNAC-F 1+1 HA is active-passive, not load- balanced. Option C is wrong because the restored primary does not power itself down for maintenance.
Option D is a trap: five failed heartbeats are used in failure detection and gateway validation logic, not as an automatic failback timer. The exam point is simple: automatic failover, manual failback .
NEW QUESTION # 54
......
For candidates who want to evaluate and enhance their Fortinet NSE5_FNC_AD_7.6 Test Preparation online, the web-based practice test is a perfect choice. You can attempt our 60 Fortinet web-based practice exam whenever it suits you because it is accessible from any location with an internet connection. This Fortinet NSE 5 - FortiNAC-F 7.6 Administrator browser-based practice exam helps you overcome exam fear as it simulates the environment of the real test.
New NSE5_FNC_AD_7.6 Dumps Pdf: https://www.prep4sureguide.com/NSE5_FNC_AD_7.6-prep4sure-exam-guide.html
P.S. Free & New NSE5_FNC_AD_7.6 dumps are available on Google Drive shared by Prep4sureGuide: https://drive.google.com/open?id=1AzrCRN2Cr-IWEtcy_ilcsvMTe3SvLFeu