BONUS!!! Download part of SurePassExams CWNA-109 dumps for free: https://drive.google.com/open?id=1nax4iYnbU8-fm1prHSTnaALQRPXqPWu_
You can easily self-assess your performance by practicing the CWNP CWNA-109 Exam Questions in practice software, which records your results. By preparing CWNA-109 exam questions you can perform well in professional exams and earn your CWNP. This is a life-changing opportunity so don't miss the chance. Avail of this opportunity, become a professional CWNP certified and grow your career.
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
>> Dumps CWNA-109 Questions <<
For further and better consolidation of your learning on our CWNA-109 exam questions, our company offers an interactive test engine-Software test engine. And this version is also popular for the advantage of silulating the real CWNA-109 exam. Please pay attention to the point that the Software version of our CWNA-109 praparation guide can only apply in the Windows system. When you are practicing with it, you will find that every time you finished the exam, the exam scores will come out.
NEW QUESTION # 68
You are implementing a multi-AP WLAN and fast secure roaming is essential. Which one of the following methods is an IEEE 802.11 standard method for fast roaming?
Answer: B
Explanation:
FT (Fast Transition) is an IEEE 802.11 standard method for fast roaming. FT is defined in the IEEE 802.11r amendment and is also known as Fast BSS Transition (FBT) or Fast Secure Roaming. FT is a feature that allows a client station to quickly switch from one AP to another within the same ESS (Extended Service Set) without having to re-authenticate and re-associate with each AP. This reduces the latency and packet loss that may occur during roaming, thus improving the user experience and maintaining the security of the connection. FT works by using pre-authentication and key caching mechanisms that allow the client station and the APs to exchange security information before the actual roaming occurs. This way, when the client station decides to roam to a new AP, it can use a fast reassociation request and response that contain only a few fields, instead of a full authentication and association exchange that require more time and data. References: 1, Chapter 9, page 367; 2, Section 6.3
NEW QUESTION # 69
A string of characters and digits is entered into an AP and a client STA for WPA2 security. The string is 8 characters long. What is this string called?
Answer: C
Explanation:
The string of characters and digits that is entered into an AP and a client STA for WPA2 security and is 8 characters long is called a passphrase. A passphrase is a human-readable text that is used to generate a Pre- Shared Key (PSK) for WPA2-Personal security. A passphrase can be between 8 and 63 characters long and can include any ASCII character. The PSK is a 256-bit key that is derived from the passphrase using a hashing algorithm called PBKDF2. The PSK is used to encrypt and decrypt the data frames between the AP and the client STA. A MSK is a Master Session Key that is generated by an authentication server for WPA2- Enterprise security. A WEP key is a 40-bit or 104-bit key that is used for Wired Equivalent Privacy (WEP) security, which is deprecated and insecure. A PSK is not a string of characters and digits, but a binary key. References: [CWNP Certified Wireless Network Administrator Official Study Guide: Exam CWNA-
109], page 303; [CWNA: Certified Wireless Network Administrator Official Study Guide: Exam CWNA-
109], page 293.
NEW QUESTION # 70
A wireless engineer needs to calculate the total loss of an RF signal as it travels through free space between a transmitting and receiving antenna. What is this calculation called?
Answer: C
Explanation:
Free space path loss (FSPL) is the loss of signal strength that occurs as an RF wave propagates through free space, with no obstructions, over a given distance. FSPL increases as the distance between the transmitter and receiver increases, and it also increases with higher frequencies.
FSPL is a critical calculation in designing outdoor point-to-point and point-to-multipoint bridge links, as it directly affects the link budget calculation needed to ensure adequate signal strength at the receiver.
NEW QUESTION # 71
What primary metric of scanning can stations use to select the best AP for connectivity to the desired BSS?
Answer: D
Explanation:
When a station scans for available wireless networks, it listens for beacon frames sent by APs. A beacon frame contains information about the BSS, such as SSID, supported rates, channel, security, etc. The station also measures the signal strength of the beacon frames, which indicates how well the station can communicate with the AP. The signal strength is usually expressed in dBm or RSSI units. The higher the signal strength, the better the connection quality and performance. Therefore, the station can use the signal strength of AP beacons as the primary metric to select the best AP for connectivity to the desired BSS12. References: CWNA-109 Study Guide, Chapter 6: Wireless LAN Devices and Topologies, page
249; CWNA-109 Study Guide, Chapter 6: Wireless LAN Devices and Topologies, page 243.
NEW QUESTION # 72
In an 802.11 2.4 GHz system, what 22 MHz channels are considered non-overlapping?
Answer: C
Explanation:
In the 2.4 GHz frequency band used for 802.11 wireless networks, the channel bandwidth is typically 20 MHz, but the actual frequency spread of each channel is about 22 MHz due to the modulation techniques used. This spread causes overlap between adjacent channels, which can lead to interference and degrade network performance. To avoid this, it's essential to use non-overlapping channels.
The three non-overlapping channels in the 2.4 GHz band are 1, 6, and 11. Each of these channels is spaced sufficiently apart to avoid interference with each other:
* Channel 1: Centered at 2.412 GHz.
* Channel 6: Centered at 2.437 GHz.
* Channel 11: Centered at 2.462 GHz.
Given the options provided, option C (1 and 5) is the closest to a pair of non-overlapping channels, although in practice, channel 5 would still cause some interference with channel 1 due to the 22 MHz spread. The ideal choice for non-overlapping channels would be any two channels among 1, 6, and 11, but this is not an option provided. Therefore, within the given options, 1 and 5 are the best choice, understanding that in a real-world scenario, 1 and 6 or 6 and 11 would be preferred to avoid overlap.
References:
CWNA Certified Wireless Network Administrator Official Study Guide: Exam CWNA-109, by David D.
Coleman and David A. Westcott.
Understanding 2.4 GHz channel arrangement and interference patterns in 802.11 wireless networks.
NEW QUESTION # 73
......
Our CWNA-109 study materials are compiled by domestic first-rate experts and senior lecturer and the contents of them contain all the important information about the test and all the possible answers of the questions which maybe appear in the test. You can use the practice test software to check your learning outcomes. Our CWNA-109 study materials’ self-learning and self-evaluation functions, the statistics report function, the timing function and the function of stimulating the test could assist you to find your weak links, check your level, adjust the speed and have a warming up for the real exam. You will feel your choice to buy CWNA-109 Study Materials are too right.
CWNA-109 Practice Braindumps: https://www.surepassexams.com/CWNA-109-exam-bootcamp.html
BONUS!!! Download part of SurePassExams CWNA-109 dumps for free: https://drive.google.com/open?id=1nax4iYnbU8-fm1prHSTnaALQRPXqPWu_