For candidates who will attend an exam, some practice for it is necessary. AZ-802 Exam Dumps of us will give you the practice you need. AZ-802 exam dumps of us contain the knowledge point of the exam. Skilled professionals will verify the questions and answers, which will guarantee the correctness. Besides, we also offer you free update for one year after purchasing, and the update version will send to your email address automatically.
| Section | Objectives |
|---|---|
| Topic 1: Secure and manage Windows Server environments | - Identity and access management
|
| Topic 2: Compute, storage, and virtualization | - Virtual machines and containers
|
| Topic 3: Networking and high availability | - High availability and disaster recovery
|
| Topic 4: Hybrid infrastructure management | - Azure integration
|
>> Certification AZ-802 Dump <<
Our AZ-802 preparation materials are willing to give you some help if you want to be better in your daily job and get a promotion on matter on the salary or on the position. Those who have used AZ-802 training engine have already obtained an international certificate and have performed even more prominently in their daily work. As it should be, they won the competition. So as they wrote to us that our AZ-802 Exam Questions had changed their life.
NEW QUESTION # 171
You need to configure remote administration to meet the security requirements. What should you use?
Answer: D
Explanation:
The requirement states that server administrators must request approval before establishing a Remote Desktop connection to an Azure virtual machine, and that once approved, the connection must be established within a defined two-hour window. This request-approve-then-time-limited-access pattern for a specific management port on an Azure VM is precisely what just-in-time (JIT) VM access, a Microsoft Defender for Cloud capability, provides: it keeps the RDP/SSH management ports closed by default in the network security group, requires an explicit access request, and, once approved, opens the port only for a specified time window and only from the requester ' s source IP. Microsoft Entra Privileged Identity Management provides time-bound, approval-based elevation for Microsoft Entra and Azure RBAC roles, not for opening network ports to a VM, so it does not by itself control Remote Desktop network access. The Remote Desktop extension for Azure Cloud Services is a legacy classic-deployment feature unrelated to this scenario. Azure Bastion provides browser-based RDP/SSH without exposing public IPs but does not implement an approval workflow with a bounded connection window. JIT VM access is therefore the correct, purpose-built solution.
NEW QUESTION # 172
You have a Hyper-V failover cluster named Cluster1 at a main datacenter. Cluster1 contains two nodes that have the Hyper-V server role installed. Cluster1 hosts 10 highly available virtual machines. You have a cluster named Cluster2 in a disaster recovery site. Cluster2 contains two nodes that have the Hyper-V server role installed. You plan to use Hyper-V Replica to replicate the virtual machines from Cluster1 to Cluster2.
What should you do? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation:
Cluster role to create on Cluster2: Hyper-V Replica Broker. Replication target name to specify: The name of the Hyper-V Replica Broker.
When Hyper-V Replica is used with a clustered Hyper-V host as either the primary or the replica site, that cluster requires a Hyper-V Replica Broker role, because the broker abstracts away which specific physical node currently owns a given replicated virtual machine, keeping replication working correctly even as VMs live-migrate or fail over between nodes within the cluster. Before enabling replication, an administrator must create this Hyper-V Replica Broker role on Cluster2 and configure its replication settings, including the authentication method, the storage location for replica virtual machine files, and which primary servers are allowed to replicate to it. When subsequently configuring replication for the virtual machines on Cluster1, the destination (replica server) must be specified using the Hyper-V Replica Broker ' s own client access point name -- not the name of an individual physical node in Cluster2 -- because the broker, not any single node, is what tracks current VM ownership as virtual machines move between Cluster2 ' s nodes. Specifying an individual node name instead would break replication and failover as soon as a VM ' s ownership moved to a different node in Cluster2.
NEW QUESTION # 173
You have an Azure subscription. The subscription contains a virtual machine named VM1 that runs Windows Server. A network interface named NI1 is assigned to VM1. The Ethernet adapter on VM1 is disabled. You need to use the Azure portal to enable the adapter. What should you use from the portal?
Answer: E
Explanation:
When a Windows VM ' s network adapter is disabled inside the guest operating system, standard remote- management channels such as RDP become unavailable because the adapter that would carry that traffic is itself switched off, so the Azure-recommended portal-based fix is to use the Diagnostic settings blade for VM1 to turn on boot diagnostics if it is not already enabled. Boot diagnostics is in turn a prerequisite for the Serial Console feature, found under Support + troubleshooting on the VM ' s blade, which gives an administrator a SAC or CMD session directly into the VM ' s console over the hypervisor ' s serial channel rather than over the network, so it works even without any functioning network connectivity. From that Serial Console session, commands such as netsh interface set interface admin=enabled can be run against the disabled adapter to re-enable it, after which normal network access and RDP are restored. The IP configurations blade for NI1 only manages the Azure Resource Manager representation of the network interface, such as its private IP address assignment, and has no visibility into or control over the guest operating system ' s adapter enable/disable state, while neither Configuration settings nor Reset password addresses a disabled network adapter at all, making Diagnostic settings the correct starting point in the portal for this scenario.
NEW QUESTION # 174
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. You are planning the deployment of DNS to a new network. You have three internal DNS servers as shown in the following exhibit (Server1/Montreal/10.0.1.10/contoso.local, Server2/Toronto/10.0.2.10/east.contoso.local, Server3/Seattle/10.0.3.10/west.contoso.local). The contoso.
local zone contains zone delegations for east.contoso.local and west.contoso.local. All the DNS servers use root hints. You need to ensure that all the DNS servers can resolve the names of all the internal namespaces and internet hosts. Solution: You configure Server2 and Server3 to forward DNS requests to 10.0.1.10. Does this meet the goal?
Server1 (Montreal, 10.0.1.10, contoso.local) / Server2 (Toronto, 10.0.2.10, east.contoso.local) / Server3 (Seattle, 10.0.3.10, west.contoso.local); contoso.local delegates east.contoso.local and west.contoso.local.
Answer: A
Explanation:
A forwarder configuration tells a DNS server to hand off any query it cannot answer authoritatively to the specified forwarder and to trust that forwarder to fully resolve the name, including chasing any referrals or delegations itself, rather than returning a partial referral back to the requester. Server1, at 10.0.1.10, is authoritative for the parent zone contoso.local and holds the delegation (NS) records pointing to Server2 and Server3 for the east.contoso.local and west.contoso.local child zones, and Server1 also uses root hints for internet name resolution. When Server2 or Server3 forwards any query - whether for a name under the other sibling subdomain or for an internet host - to Server1, Server1 will either answer authoritatively (for contoso.
local records it holds directly), follow its own delegation records to query the correct child-zone server on the requester ' s behalf, or use its root hints to resolve internet names, and in every case it returns a single, fully resolved answer to the forwarding server. Because Server1 is capable of resolving every internal namespace (its own zone plus both delegated child zones) and every internet host, and because Server2 and Server3 are configured to rely on it as their forwarder for anything outside their own local zone, both servers gain full internal and internet resolution simply by pointing to 10.0.1.10. This satisfies the stated goal.
NEW QUESTION # 175
You have a server named Server1 that runs Windows Server 2022 and is part of a three-node failover cluster.
You need to upgrade Server1 to Windows Server 2025. The solution must minimize downtime for the cluster.
What should you do first?
Answer: C
Explanation:
The documented approach for minimizing cluster downtime while performing an operating system upgrade on a single cluster node is to first pause that node and drain its currently running clustered roles, which causes those roles, including any highly available virtual machines or other clustered workloads, to live-migrate over to the remaining, still-active cluster members before any disruptive action is taken directly against Server1 itself. Only once Server1 has been paused and fully drained of its workloads is it safe to proceed with the actual operating system upgrade to Windows Server 2025 on that node, since the workloads it was hosting are now running elsewhere in the cluster and will not experience downtime while Server1 is being upgraded.
Evicting Server1 from the cluster entirely, or taking the whole three-node cluster offline, are both far more disruptive first steps than necessary and would cause unnecessary downtime well beyond what pausing and draining a single node requires, since eviction removes the node from cluster membership altogether and taking the whole cluster offline would stop every clustered role on every node rather than only the one node being upgraded. Updating the functional level of the cluster is a step performed only after every node in the cluster has already been upgraded to the new operating system version, not before the rolling upgrade process even begins, so pausing Server1 and draining its workloads is the correct first action to take.
NEW QUESTION # 176
......
There is no doubt that having a AZ-802 certificate is of great importance to our daily life and daily work, it can improve your comprehensive strength when you are seeking for a decent job or competing for an important position, mainly because with AZ-802 Certification, you can totally highlight your resume and become more confident in front of your interviewers and competitors. In this case, our AZ-802 question torrent can play a very important part in helping you achieve your dream.
AZ-802 Free Study Material: https://www.itpassleader.com/Microsoft/AZ-802-dumps-pass-exam.html