BTW, DOWNLOAD part of iPassleader H35-580_V2.0 dumps from Cloud Storage: https://drive.google.com/open?id=1O3SIzxoxtUwMWE8QKLVGkYIrUU_t1lEs
Besides, considering the current status of practice materials market based on exam candidates’ demand, we only add concentrated points into our H35-580_V2.0 exam tool to save time and cost for you. Our H35-580_V2.0 exam tool has three versions for you to choose, PDF, App, and software. If you have any question or hesitate, you can download our free Demo. The Demo will show you part of the content of our H35-580_V2.0 Study Materials real exam materials. So you do not have to worry about the quality of our exam questions. Our H35-580_V2.0 exam tool have been trusted and purchased by thousands of candidates. What are you waiting for?
| Section | Weight | Objectives |
|---|---|---|
| 5G Base Station Overview and Basic Operations | 10% | - 5G Base Station Configuration and Commissioning - 5G Base Station Maintenance and Fault Handling - 5G Base Station Installation and Deployment - 5G Base Station Products and Hardware Composition |
| Basic Features of 5G Wireless Networks | 20% | - Massive MIMO Technology - Flexible Duplex and Spectrum Sharing - Beam Management and Optimization - 5G QoS and Slicing |
| 5G Wireless Network Principles | 20% | - 5G NR Mobility and Power Control - 5G NR Frame Structure and Physical Resources - 5G NR Channels and Signals - 5G NR Overview and Key Technologies |
| Fundamentals of 5G Network Optimization | 30% | - Capacity and Throughput Optimization - Coverage Optimization - Network Optimization Process and Methods - Performance Monitoring and Evaluation Indicators - Interference Optimization - Mobility Optimization |
| Fundamentals of 5G Network Planning | 20% | - Capacity and Interference Planning - Site Survey and Design - 5G Network Planning Process and Principles - Wireless Environment Analysis and Coverage Planning - Parameter Planning and Configuration |
>> H35-580_V2.0 Examcollection Dumps Torrent <<
The passing rate of our H35-580_V2.0 training braindump is 99% which means that you almost can pass the H35-580_V2.0 test with no doubts. The reasons why our H35-580_V2.0 test guide’ passing rate is so high are varied. That is because our test bank includes two forms and they are the PDF test questions which are selected by the senior lecturer, published authors and professional experts and the practice test software which can test your mastery degree of our H35-580_V2.0 study question at any time. The two forms cover the syllabus of the entire H35-580_V2.0 test. You will pass the H35-580_V2.0 exam with it.
NEW QUESTION # 72
Under the same gNodeB, an NR TDD cell supports the same maximum number of RRC_CONNECTED UEs as an NR FDD cell.
Answer: A
Explanation:
Explanation
According to the Radio Resource Control, the maximum number of RRC_CONNECTED UEs depends on the number of available C-RNTIs (Cell Radio Network Temporary Identifiers) in a cell. The number of C-RNTIs is limited by the size of the RNTI field in the DCI (Downlink Control Information) format. For NR TDD cells, the RNTI field size is 16 bits, which allows up to 65,536 C-RNTIs. For NR FDD cells, the RNTI field size is
14 bits, which allows up to 16,384 C-RNTIs. Therefore, an NR TDD cell can support more RRC_CONNECTED UEs than an NR FDD cell under the same gNodeB.
NEW QUESTION # 73
Which of the following statements about the advantages of the Rayce ray tracing model are correct?(Select All that Apply)
Answer: A,B
Explanation:
Explanation
The Rayce ray tracing model is a propagation model that computes propagation paths using 3-D environment geometry 3. It is based on the shooting and bouncing rays (SBR) method, which launches rays from the transmitter and traces their reflections and diffractions until they reach the receiver or are attenuated below a threshold 4. The Rayce ray tracing model offers more accurate path searching, reflection, and diffraction energy calculation for electromagnetic wave propagation than other models, such as empirical models or deterministic models 5. It also offers higher level prediction accuracy, especially for massive MIMO systems that use beamforming techniques 6. The Rayce ray tracing model is not applicable only to C-band, but also to mmWave and other frequency bands 7.
NEW QUESTION # 74
Which of the following protocols/data belong to Layer 3 of the Uu interface? (Select All that Apply)
Answer: C
Explanation:
According to the LTE user plane protocol stack , the Layer 3 of the Uu interface consists of the RRC protocol and the IP data. The RRC protocol is responsible for radio resource management, access control, handover and mobility, and encryption and integrity protection. The IP data is the payload of the user plane that is transmitted over the PDCP layer.
NEW QUESTION # 75
Which of the following problems may cause SCTP link disconnection over the N2 interface?
(Select All that Apply)
Answer: A,B,C,D
Explanation:
According to the Troubleshooting Guide for Huawei 5G Base Stations , the possible causes of SCTP link disconnection over the N2 interface are as follows:
Routes are not configured: If the routes between the base station and the core network are not configured correctly, the SCTP link cannot be established or may be disconnected.
PLMN configurations are incorrect: If the PLMN configurations on the base station and the core network do not match, the SCTP link cannot be established or may be disconnected.
Physical ports are faulty: If the physical ports on the base station or the core network are faulty, such as damaged cables, loose connectors, or port errors, the SCTP link cannot be established or may be disconnected.
The SCTP port configuration is incorrect: If the SCTP port configuration on the base station or the core network is incorrect, such as using a reserved port number or a conflicting port number, the SCTP link cannot be established or may be disconnected.
NEW QUESTION # 76
Which of the following common messages need to be scheduled?(Select All that Apply)
Answer: A,C,D
Explanation:
Explanation
According to the 5G NR Physical Layer Specifications, Paging, SIB, and MIB are common messages that need to be scheduled. Paging is a message that is used to notify a UE of incoming data or system information when it is in idle mode or connected mode inactive state. SIB stands for System Information Block, which is a message that contains various system parameters and configuration information for UEs. MIB stands for Master Information Block, which is a message that contains essential system information such as system frame number and subcarrier spacing. These common messages need to be scheduled because they are transmitted periodically and have fixed time-frequency resources.
NEW QUESTION # 77
......
Customizable Huawei H35-580_V2.0 practice exams (desktop and web-based) of iPassleader are designed to give you the best learning experience. You can attempt these H35-580_V2.0 practice tests multiple times till the best preparation for the HCIA-5G-RNP&RNO V2.0 (H35-580_V2.0) test. On every take, our Huawei H35-580_V2.0 practice tests save your progress so you can view it to see and strengthen your weak concepts easily.
Mock H35-580_V2.0 Exams: https://www.ipassleader.com/Huawei/H35-580_V2.0-practice-exam-dumps.html
P.S. Free & New H35-580_V2.0 dumps are available on Google Drive shared by iPassleader: https://drive.google.com/open?id=1O3SIzxoxtUwMWE8QKLVGkYIrUU_t1lEs