2026 Latest GetValidTest H12-893_V1.0 PDF Dumps and H12-893_V1.0 Exam Engine Free Share: https://drive.google.com/open?id=1UmkC56Eh9ZmxbQhCVrA285pC4QcEjP1g
When you decide to pass the H12-893_V1.0 exam and get relate certification, you must want to find a reliable exam tool to prepare for exam. That is the reason why I want to recommend our H12-893_V1.0 prep guide to you, because we believe this is what you have been looking for. Moreover we are committed to offer you with data protect act and guarantee you will not suffer from virus intrusion and information leakage after purchasing our H12-893_V1.0 Guide Torrent. The last but not least we have professional groups providing guidance in terms of download and installment remotely.
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
All these H12-893_V1.0 exam dumps formats contain real, updated, and error-free HCIP-Data Center Network V1.0 (H12-893_V1.0) exam questions that prepare you for the final H12-893_V1.0 exam. To give you an idea about the top features of H12-893_V1.0 Exam Dumps, a free demo download facility is being offered to HCIP-Data Center Network V1.0 candidates. This free H12-893_V1.0 exam questions demo download facility is available in all three H12-893_V1.0 exam dumps formats.
NEW QUESTION # 23
Which of the following statements are true about a routing design that employs OSPF on the underlay network of a DC? (Select All that Apply)
Answer: A,C
Explanation:
OSPF (Open Shortest Path First) is a routing protocol used in the underlay network of Huawei's CloudFabric DCNs. Let's evaluate each statement:
A . Typically, the IP address of Loopback0 is configured as the VTEP IP address and the same IP address is planned for active-active leaf nodes in the same group: This is true. Loopback0 IP is commonly used as the VTEP IP for stability, and in active-active leaf node groups (e.g., M-LAG), the same IP can be configured with VRRP or anycast to ensure consistency. TRUE.
B . The network type of spine and leaf nodes can be set to P2P in order to accelerate convergence: This is true. Setting OSPF network type to Point-to-Point (P2P) on spine-leaf links reduces overhead (e.g., no DR/BDR election) and speeds up convergence, a recommended practice in Huawei DCNs. TRUE.
C . This routing design is recommended when the DC has more than 300 switches: This is false. OSPF is suitable for smaller to medium-sized DCNs (e.g., up to 200-300 switches). For larger networks (>300 switches), EBGP is preferred due to better scalability and reduced complexity. FALSE.
D . It is recommended that all devices be planned in Area 0: This is false. While a single Area 0 is possible for small DCNs, multi-area OSPF is recommended for larger networks to manage scalability and reduce routing table size, avoiding a flat Area 0 design. FALSE.
Thus, A and B are true statements about OSPF routing design in a DC underlay.
NEW QUESTION # 24
Which of the following are the application scenarios of Huawei CloudFabric Solution? (Select All that Apply)
Answer: A,B,C
NEW QUESTION # 25
Assume that a VXLAN tunnel is monitored on a Huawei CE series switch and that the tunnel status is Down or the tunnel fails to be dynamically established. In this scenario, which of the following statements are true about how to check the cause of the fault? (Select All that Apply)
Answer: A,B,C,D
Explanation:
On Huawei CloudEngine (CE) series switches, VXLAN tunnel monitoring and troubleshooting involve specific commands to diagnose issues such as tunnel Down status or failed dynamic establishment.
Let's evaluate each option:
A). Run the display vxlan statistics command to check the cause of the fault: This command provides statistics on VXLAN tunnel traffic, including packet drops, encapsulation/decapsulation counts, and errors. It helps identify issues like misconfiguration or network congestion, making it a valid troubleshooting tool. TRUE.
B). Run the display vxlan peer command to check the cause of the fault on the peer device of the tunnel: This command displays information about VXLAN peers, including their IP addresses, VNIs, and reachability status. Checking the peer device's status can reveal connectivity or configuration mismatches, aiding fault diagnosis. TRUE.
C). Run the display vxlan troubleshooting command to check the causes of at most the latest five failures to dynamically establish a VXLAN tunnel: This command logs and displays troubleshooting details, including the latest five failure reasons for dynamic tunnel setup (e.g., BGP EVPN issues or reachability problems). This is a standard feature on Huawei CE switches.
TRUE.
D). Run the display vxlan troubleshooting command to check at most the latest five reasons why a VXLAN tunnel goes Down: This command also tracks reasons for tunnel Down events (e.g., underlay failure, peer unreachability), limited to the latest five incidents. This is consistent with Huawei's troubleshooting capabilities. TRUE.
All options A, B, C, and D are true, as they represent valid commands and approaches to troubleshoot VXLAN tunnel issues on Huawei CE switches.
NEW QUESTION # 26
Which of the following statements is false about centralized gateway deployment using BGP EVPN?
Answer: D
Explanation:
Centralized gateway deployment using BGP EVPN in Huawei's data center networks (e.g., CloudFabric) involves a gateway handling Layer 3 routing for VXLAN overlays. Let's evaluate each statement:
A . When configuring a VTEP, you need to create a Layer 2 BD and bind a VNI to the Layer 2 BD: A Bridge Domain (BD) is a Layer 2 broadcast domain in VXLAN, and a Virtual Network Identifier (VNI) is bound to it to segment traffic. This is a standard step when configuring a VXLAN Tunnel Endpoint (VTEP) to map the overlay network. TRUE.
B . A VXLAN tunnel is identified by a pair of VTEP IP addresses and can be established if the local and remote VTEP IP addresses are reachable to each other at Layer 3: VXLAN tunnels are established between VTEPs using their IP addresses as endpoints. Layer 3 reachability (e.g., via underlay routing) is required for tunnel establishment. TRUE.
C . When BGP EVPN is used to dynamically establish a VXLAN tunnel, the local and remote VTEPs first establish a BGP EVPN peer relationship and then exchange BGP EVPN routes to transmit VNI and VTEP IP address information. A VXLAN tunnel is then dynamically established between them: In BGP EVPN, VTEPs establish a BGP peer relationship, exchange routes (e.g., Type 2 for MAC/IP or Type 3 for multicast), and share VNI and VTEP IP details, enabling dynamic tunnel setup. TRUE.
D . When configuring a VTEP, you need to create an EVPN Instance in the Layer 2 BD and configure an RD for the local EVPN instance. You do not need to configure an RT: An EVPN Instance (EVI) is created within a BD, and a Route Distinguisher (RD) is configured to make routes unique. However, Route Targets (RTs) are also required to control route import/export between EVPN peers, ensuring proper VNI and route distribution. Stating that RT configuration is not needed is incorrect, as RTs are essential for BGP EVPN operation. FALSE.
Thus, D is the false statement because RT configuration is necessary in centralized gateway deployment with BGP EVPN.
NEW QUESTION # 27
Which of the following statements is false about VXLAN tunnel establishment?
Answer: B
Explanation:
VXLAN (Virtual Extensible LAN) tunnels are used to encapsulate Layer 2 traffic over a Layer 3 network, a key component in Huawei's CloudFabric data center solutions. Let's evaluate each statement:
A). A VXLAN tunnel is identified by a pair of VTEPs: This is true. A VXLAN tunnel is identified by the pair of VXLAN Tunnel Endpoint (VTEP) IP addresses (local and remote), along with the VNI (VXLAN Network Identifier). This ensures unique tunnel identification. TRUE.
B). After a tunnel is established, if one end of the tunnel goes Down, the other end may not go Down:
This is true. VXLAN tunnels are unidirectional, and the status of one end does not automatically affect the other unless the underlay network connectivity (e.g., Layer 3 reachability) is lost. The remote VTEP may remain operational if it can still encapsulate/decapsulate traffic. TRUE.
C). For a static tunnel, you need to manually configure the local and remote VNIs: This is true. In a static VXLAN tunnel, administrators must manually configure the VNI and VTEP IP addresses on both ends, as there is no dynamic control plane (e.g., BGP EVPN) to automate the process.
TRUE.
D). Dynamic tunnels depend on EVPN Type 5 routes to transmit information: This is false.
Dynamic VXLAN tunnels rely on BGP EVPN as the control plane, but Type 5 routes (IP Prefix routes) are specifically used for advertising host IP routes and external network routes, not for general tunnel establishment. Dynamic tunnel setup primarily uses Type 2 (MAC/IP Advertisement) and Type 3 (Multicast) routes to exchange VNI and VTEP information. Type 5 routes are relevant for Layer 3 routing, not the initial tunnel setup. FALSE.
Thus, D is the false statement because dynamic tunnels depend on EVPN Type 2 and Type 3 routes, not Type 5, for initial establishment.
NEW QUESTION # 28
......
To examine the content quality and format, free H12-893_V1.0 brain dumps demo are available on our website to be downloaded. You can compare these top H12-893_V1.0 dumps with any of the accessible source with you. To stamp reliability, perfection and the ultimate benefit of our content, we offer you a 100% money back guarantee. Take back your money, if you fail the exam despite using H12-893_V1.0 Practice Test.
Exam H12-893_V1.0 Review: https://www.getvalidtest.com/H12-893_V1.0-exam.html
What's more, part of that GetValidTest H12-893_V1.0 dumps now are free: https://drive.google.com/open?id=1UmkC56Eh9ZmxbQhCVrA285pC4QcEjP1g