The Best JN0-351 Valid Exam Practice & Leader in Certification Exams Materials & Fantastic JN0-351 Test Topics Pdf

P.S. Free & New JN0-351 dumps are available on Google Drive shared by PassReview: https://drive.google.com/open?id=1h7mi3J2InxYVMU_cg2G0H9Clm1ee6fLD

With the help of our JN0-351 desktop practice test software, you will be able to feel the real exam scenario. It is better than JN0-351 vce dumps questions. If you want to pass the JN0-351 JN0-351 exam in the first attempt, then donโ€™t forget to go through the JN0-351 desktop practice test software provided by the PassReview. It will allow you to assess your skills and you will be able to get a clear idea of your preparation for the Real JN0-351 Exam. It is the best way to proceed when you are trying to find the best solution to pass the JN0-351 exam in the first attempt.

Juniper JN0-351 Exam Syllabus Topics:

SectionObjectives
High Availability- Junos HA features
  • 1. Graceful restart
    • 2. NSR / NSB
      • 3. GRES
        - Redundancy mechanisms
        • 1. BFD
          • 2. VRRP
            Layer 3 Routing Fundamentals- Routing protocols
            • 1. OSPF fundamentals and operations
              • 2. IS-IS basics
                • 3. BGP fundamentals
                  - Routing concepts
                  • 1. Route preference and policy
                    • 2. Protocol-independent routing
                      Layer 2 Security- Switch security features
                      • 1. MAC limiting
                        • 2. Storm control
                          Tunneling Technologies- IP tunneling
                          • 1. GRE tunnels
                            • 2. IP-IP tunnels
                              Layer 2 Switching- Spanning Tree Protocol (STP/RSTP)
                              • 1. STP operations and convergence
                                • 2. Loop prevention mechanisms
                                  - VLANs and trunking
                                  • 1. 802.1Q tagging
                                    • 2. VLAN configuration and verification

                                      >> JN0-351 Valid Exam Practice <<

                                      JN0-351 Test Topics Pdf | Valid JN0-351 Exam Notes

                                      The Juniper JN0-351 exam questions are being offered in three different formats. These formats are Enterprise Routing and Switching, Specialist (JNCIS-ENT) (JN0-351) PDF dumps files, desktop practice test software, and web-based practice test software. All these three Enterprise Routing and Switching, Specialist (JNCIS-ENT) (JN0-351) exam dumps formats contain the real Enterprise Routing and Switching, Specialist (JNCIS-ENT) (JN0-351) exam questions that assist you in your Enterprise Routing and Switching, Specialist (JNCIS-ENT) (JN0-351) practice exam preparation and finally, you will be confident to pass the final JN0-351 exam easily.

                                      Juniper Enterprise Routing and Switching, Specialist (JNCIS-ENT) Sample Questions (Q51-Q56):

                                      NEW QUESTION # 51
                                      Which statement is true about the configuration shown in the exhibit?

                                      Answer: A


                                      NEW QUESTION # 52
                                      Which two statements are correct about tunnels? (Choose two.)

                                      Answer: B,C

                                      Explanation:
                                      Explanation
                                      A tunnel is a connection between two computer networks, in which data is sent from one network to another through an encrypted link. Tunnels are commonly used to secure data communications between two networks or to connect two networks that use different protocols.
                                      Option B is correct, because tunnel endpoints must have a valid route to the remote tunnel endpoint. A tunnel endpoint is the device that initiates or terminates a tunnel connection. For a tunnel to be established, both endpoints must be able to reach each other over the underlying network. This means that they must have a valid route to the IP address of the remote endpoint1.
                                      Option D is correct, because tunnels add additional overhead to packet size. Tunnels work by encapsulating packets: wrapping packets inside of other packets. This means that the original packet becomes the payload of the surrounding packet, and the surrounding packet has its own header and trailer. The header and trailer of the surrounding packet add extra bytes to the packet size, which is called overhead. Overhead can reduce the efficiency and performance of a network, as it consumes more bandwidth and processing power2.
                                      Option A is incorrect, because BFD can be used to monitor tunnels. BFD is a protocol that can be used to quickly detect failures in the forwarding path between two adjacent routers or switches. BFD can be integrated with various routing protocols and link aggregation protocols to provide faster convergence and fault recovery.
                                      BFD can also be used to monitor the connectivity of tunnels, such as GRE, IPsec, or MPLS.
                                      Option C is incorrect, because IP-IP tunnels are stateless. IP-IP tunnels are a type of tunnels that use IP as both the encapsulating and encapsulated protocol. IP-IP tunnels are simple and easy to configure, but they do not provide any security or authentication features. IP-IP tunnels are stateless, which means that they do not keep track of the state or status of the tunnel connection. Stateless tunnels do not require any signaling or negotiation between the endpoints, but they also do not provide any error detection or recovery mechanisms.
                                      References:
                                      1: What is Tunneling? | Tunneling in Networking 2: What Is Tunnel In Networking, Its Types, And Its Benefits? : [Configuring Bidirectional Forwarding Detection] : [IP-IP Tunneling]


                                      NEW QUESTION # 53
                                      You are configuring an IS-IS IGP network and do not see the IS-IS adjacencies established. In this scenario, what are two reasons for this problem? (Choose two.)

                                      Answer: A,D

                                      Explanation:
                                      Explanation
                                      Option A suggests that the MTU is not at least 1492 bytes. This is correct because IS-IS requires a minimum MTU of 1492 bytes to establish adjacencies1. If the MTU is less than this, IS-IS adjacencies will not be established1.
                                      Option D suggests that the lo0 interface is not included as an IS-IS interface. This is also correct because the loopback interface (lo0) is typically used as the router ID in IS-IS1. If the loopback interface is not included in IS-IS, it could prevent IS-IS adjacencies from being established1.
                                      Therefore, options A and D are correct.


                                      NEW QUESTION # 54
                                      Both the R1 and R2 devices are advertising prefix X into AS 65530 with the BGP attributes shown in the exhibit.

                                      Which statement is correct in this scenario?

                                      Answer: C


                                      NEW QUESTION # 55
                                      You want to ensure traffic is routed through a GRE tunnel.
                                      In this scenario, which two statements will satisfy this requirement? (Choose two.)

                                      Answer: C,D

                                      Explanation:
                                      Option A is correct. For traffic to be sent through a GRE tunnel, there must be a route that directs the traffic into the tunnel. This is typically accomplished through the use of a static route or a dynamic routing protocol.
                                      Option B is correct. All intermediary devices must have a route to the tunnel endpoints34. In real-world scenarios, the tunnel endpoints for a tunnel going over the Internet must have globally reachable internet addresses. Otherwise, intermediate routers in the Internet cannot forward the tunneled packets.


                                      NEW QUESTION # 56
                                      ......

                                      Our Enterprise Routing and Switching, Specialist (JNCIS-ENT) (JN0-351) exam questions are being offered in three easy-to-use and compatible formats. These Juniper JN0-351 exam dumps formats offer a user-friendly interface and are compatible with all devices, operating systems, and browsers. The Enterprise Routing and Switching, Specialist (JNCIS-ENT) (JN0-351) PDF questions file contains real and Valid JN0-351 Exam Questions that assist you in JN0-351 exam dumps preparation and boost the candidate's confidence to pass the challenging Enterprise Routing and Switching, Specialist (JNCIS-ENT) (JN0-351) exam easily. The Enterprise Routing and Switching, Specialist (JNCIS-ENT) (JN0-351) PDF dumps file work with all devices and operating system.

                                      JN0-351 Test Topics Pdf: https://www.passreview.com/JN0-351_exam-braindumps.html

                                      BONUS!!! Download part of PassReview JN0-351 dumps for free: https://drive.google.com/open?id=1h7mi3J2InxYVMU_cg2G0H9Clm1ee6fLD