Wenn Sie unsere Prüfungsmaterialien zur Huawei H35-581_V2.0 Zertifizierungsprüfung kaufen, wird ExamFragen Ihnen den besten Service und die beste Qualität bieten. Unsere Huawei H35-581_V2.0 Zertifizierungssoftware wird schon von dem Anbieter und dem Dritten autorisiert. Außerdem haben wir auch viele IT-Experten, die nach den Bedürfnissen der Kunden eine Serie von Produkten laut dem Kompendium bearbeitet. Die Materialien zur Huawei H35-581_V2.0 Zertifizierungsprüfung haben einen hohen Goldgehalt. Sie können von den Experten und Gelehrte für Forschung benutzt werden. Sie können alle unseren Produkte teilweise als Probe vorm Kauf umsonst benutzen, so dass Sie die Qualität sowie die Anwendbarkeit testen können.
| Section | Weight | Objectives |
|---|---|---|
| Topic 1: 5G Network Testing and Troubleshooting | 15% | - Fault Analysis
|
| Topic 2: 5G Radio Network Planning Fundamentals | 20% | - Radio Propagation and Coverage Principles
|
| Topic 3: 5G Network Optimization | 35% | - Mobility and Capacity Optimization
|
| Topic 4: 5G Network Planning and Design | 30% | - Coverage Planning
|
Fragenkataloge zur Huawei H35-581_V2.0 Zertifizierungsprüfung von ExamFragen sind zutreffender, autoritärer und leichter zu verstehen als die aus anderen Webseiten. Wählen Sie ExamFragen, werden Sie niemals bereuen. Falls Sie noch ein paar Sorgen haben, können Sie einige kostenlosen Testfragen und Antworten als Testvision durch unsere Webseite ExamFragen herunterladen. Nachdem Sie die Fragenkataloge zur Huawei H35-581_V2.0 Zertifizierungsprüfung von ExamFragen gekauft haben, können Sie sicherlich erfolgreich bestehen.
25. Frage
Which of the following cause values can be carried in the SCG failure information message?
Select All that Apply
Antwort: A,D
Begründung:
Options A and B are correct because both SCG reconfiguration failure and an RLC maximum-retransmission condition are defined failure causes that can be reported through the Secondary Cell Group (SCG) failure information procedure.
In NR Dual Connectivity, the SCG represents the secondary radio resources provided by the Secondary Node.
When an SCG failure occurs, the UE may report the failure to the Master Node without immediately releasing the entire master connection.
Option A - SCG reconfiguration failure: This condition occurs when the UE cannot successfully apply an applicable RRC reconfiguration affecting the SCG. The standardized failure type is scg-reconfigFailure .
Option B - Maximum RLC retransmissions: When the SCG Radio Link Control (RLC) entity reaches its configured maximum retransmission threshold, the UE can initiate SCG failure reporting. The corresponding standardized failure type is rlc-MaxNumRetx .
Option C - T301 timeout: T301 is associated with RRC connection reestablishment. Its expiration is not defined as one of the listed SCG failure types.
Option D - SRB1 integrity check failure: The SCG failure procedure can report an SRB3 integrity failure, not the SRB1 condition specified in this option.
Therefore, A and B are the correct choices.
Official Reference: 3GPP TS 38.331, Section 5.7.3, SCG Failure Information Procedure , and Section 6.2.2, SCGFailureInformation Message and FailureType .
26. Frage
The NG interface between the 5G gNodeB and the core network is IP-network based. Which of the following protocols is used on the control plane?
Antwort: D
Begründung:
Stream Control Transmission Protocol (SCTP) is the correct answer because it provides the transport-layer signaling service used by the NG control-plane interface between the gNodeB and the 5G Core.
In 5G Standalone (SA) architecture, the NG interface consists of two principal components: NG-C and NG-U.
NG-C connects the NG-RAN node to the Access and Mobility Management Function (AMF) and carries Next Generation Application Protocol (NGAP) signaling.
NGAP supports procedures such as initial UE message transfer, UE context management, handover coordination, paging, and PDU session resource management.
According to 3GPP TS 38.412, NGAP messages are transported using SCTP over IP.
SCTP provides reliable message delivery, multiple independent streams, congestion control, and multihoming capabilities.
These characteristics are particularly useful for maintaining signaling reliability and transport-network resilience.
The remaining options have different functions.
UDP provides connectionless transport and is used beneath GTP-U for applicable user-plane traffic.
GTP-U carries user-plane packets between the NG-RAN and UPF over the NG-U interface.
X2-C identifies the LTE X2 control-plane interface rather than the NG control-plane transport protocol.
Therefore, SCTP is the correct choice for the NG-C transport layer.
Official Reference: 3GPP TS 38.412, Sections 4.1 and 7, NG Signalling Bearer Protocol Stack and Transport Layer ; TS 38.410, NG Interface General Aspects .
27. Frage
Which of the following timers is specific to 5G networks?
Antwort: D
Begründung:
T319 is the correct answer because it is defined in the 5G New Radio (NR) Radio Resource Control (RRC) specification to supervise the RRC connection resume procedure.
5G NR supports three principal RRC states: RRC_IDLE, RRC_CONNECTED, and RRC_INACTIVE. The RRC_INACTIVE state allows a UE to retain its Access Stratum (AS) context while reducing signaling overhead and power consumption.
When a UE in RRC_INACTIVE needs to resume communication, it initiates the RRC connection resume procedure by transmitting an RRCResumeRequest or RRCResumeRequest1 message. Timer T319 supervises this procedure.
If the UE receives an appropriate RRCResume message, T319 is stopped, and the UE restores the relevant radio-bearer configuration and transitions to RRC_CONNECTED.
If T319 expires before successful completion, the UE performs RRC resume failure handling and enters RRC_IDLE.
The remaining timers are also present in LTE:
T300: Supervises RRC connection establishment.
T310: Supports radio-link failure detection.
T311: Supervises cell selection during RRC connection reestablishment.
Therefore, among the listed options, T319 is specifically associated with the NR RRC connection resume procedure.
Official Reference: 3GPP TS 38.331, Sections 5.3.13.3-5.3.13.5, RRC Connection Resume , and Section
7.1.1, RRC Timers .
28. Frage
Notification Control indicates whether the gNodeB must notify the core network when which of the following parameters can no longer be met?
Antwort: A
Begründung:
The Guaranteed Flow Bit Rate (GFBR) is the correct answer because Notification Control enables the NG- RAN to notify the 5G Core when the guaranteed Quality of Service (QoS) requirements associated with a GBR QoS flow can no longer be fulfilled.
In the 5G QoS architecture, each QoS flow has a QoS profile containing parameters such as the 5G QoS Identifier (5QI), Allocation and Retention Priority (ARP), and additional bit-rate parameters where applicable.
For Guaranteed Bit Rate (GBR) QoS flows, GFBR specifies the bit rate that the network is expected to guarantee under the established QoS requirements.
When Notification Control is enabled, the NG-RAN evaluates whether the configured QoS characteristics remain achievable.
If the requested QoS profile cannot be satisfied, the NG-RAN can send a notification toward the Session Management Function (SMF) indicating that GFBR can no longer be guaranteed.
The standardized assessment may consider GFBR, Packet Delay Budget (PDB), and Packet Error Rate (PER).
The remaining parameters serve different purposes.
Session-AMBR limits aggregate bit rates for applicable non-GBR traffic within a PDU session.
UE-AMBR controls aggregate non-GBR traffic associated with the UE.
MFBR defines the maximum flow bit rate rather than the guaranteed flow bit rate.
Therefore, GFBR is the correct parameter.
Official Reference: 3GPP TS 23.501, Section 5.7.2.4, Notification Control .
29. Frage
Which of the following physical-layer processing procedures is dedicated to the DFT-S-OFDM waveform?
Antwort: D
Begründung:
Transform precoding is the distinguishing physical-layer processing operation associated with Discrete Fourier Transform-spread Orthogonal Frequency Division Multiplexing (DFT-S-OFDM).
In 5G NR, uplink data transmission on the Physical Uplink Shared Channel (PUSCH) can use CP-OFDM or DFT-S-OFDM, subject to the applicable configuration.
DFT-S-OFDM introduces a Discrete Fourier Transform (DFT) operation into the symbol-processing chain before resource mapping and OFDM signal generation. This spreads modulation symbols across the allocated subcarriers.
A principal benefit is the reduction of Peak-to-Average Power Ratio (PAPR) compared with conventional CP- OFDM in typical operating conditions.
Lower PAPR enables the UE power amplifier to operate more efficiently, reducing the required amplifier back-off and potentially improving uplink coverage, particularly for power-limited terminals.
Scrambling, modulation, and layer mapping are not exclusive to DFT-S-OFDM. These operations also occur in other NR physical-layer processing chains.
By contrast, transform precoding provides the characteristic DFT-spreading operation associated with DFT-S- OFDM transmission.
Accordingly, option D is correct because it identifies the processing operation that distinguishes DFT-S- OFDM from conventional CP-OFDM.
Official Reference: 3GPP TS 38.211, Sections 6.3.1.1-6.3.1.4, PUSCH Scrambling, Modulation, Layer Mapping, and Transform Precoding ; TS 38.214, Section 6.1.3.
Technical warning / qualification: The original option states Transformer precoding . The standardized term is Transform precoding . The wording should be corrected in the published question bank.
30. Frage
......
Heute legen immer mehr IT Profis großen Wert auf Huawei H35-581_V2.0 Prüfungszertifizierung. Sie wird ein Maßstab für die IT-Fähigkeiten einer Person. Viele Leute leiden darunter, wie sich auf die Huawei H35-581_V2.0 Prüfung vorzubereiten. Allerdings sind Sie glücklich. Wenn Sie diese den Artikel gelesen haben, finden Sie doch die beste Vorbereitungsweise für Huawei H35-581_V2.0 Prüfung. Die Huawei H35-581_V2.0 Prüfungssoftware von unserem ExamFragen Team zu benutzen bedeutet, dass Ihre Prüfungszertifizierung der Huawei H35-581_V2.0 ist gesichert. Zaudern Sie noch? Laden Sie unsere kostenfreie Demo und Probieren Sie mal!
H35-581_V2.0 Ausbildungsressourcen: https://www.examfragen.de/H35-581_V2.0-pruefung-fragen.html