At present, artificial intelligence is developing so fast. So machines inevitably grow smarter and more agile. In the result, many simple jobs are substituted by machines. In order to keep your job, choose our NSEI_OTS_AR-7.6 exam questions and let yourself become an irreplaceable figure. In fact, our NSEI_OTS_AR-7.6 Study Materials can give you professional guidance no matter on your daily job or on your career. And with the NSEI_OTS_AR-7.6 certification, you will find you can be better with our help.
| Section | Objectives |
|---|---|
| Topic 1: Network security | - Configure security inspections for industrial protocols - Configure automation - Configure virtual patching |
| Topic 2: Asset management | - Explain OT standard and Fortinet compliance - Fortinet Security Fabric for an OT network - Implement device detection on FortiGate and FortiNAC |
| Topic 3: Monitoring and risk assessment | - Analyze security reports from FortiAnalyzer - Perform risk assessment and management - Create FortiAnalyzer event handlers |
| Topic 4: Network access control | - Explain OT Ethernet concepts - Configure network segmentation schemas - Configure network access authentication |
>> Valuable NSEI_OTS_AR-7.6 Feedback <<
The exam materiala of the ActualTorrent Fortinet NSEI_OTS_AR-7.6 is specifically designed for candicates. It is a professional exam materials that the IT elite team specially tailored for you. Passed the exam certification in the IT industry will be reflected in international value. There are many dumps and training materials providers that would guarantee you pass the Fortinet NSEI_OTS_AR-7.6 Exam. ActualTorrent speak with the facts, the moment when the miracle occurs can prove every word we said.
NEW QUESTION # 20
Refer to the exhibit.
A partial OT network is shown. You want to configure an automated alert sent by FortiAnalyzer when an attack occurs on a FortiGate device. Which two configurations must you implement? (Choose two answers)
Answer: B,D
Explanation:
The correct answers are A and D . The study guide provides a direct use case called Attack Detection and Automated Alert . It states: "A downstream FortiGate detects an attack and sends logs to FortiAnalyzer. FortiAnalyzer parses the logs and notifies the root FortiGate. The root FortiGate triggers the action, which in this case, is a notification to the administrator." The same slide also explicitly shows "Stitches configured on root FortiGate." This confirms that to send the automated alert, you must configure the automation stitch on the root FortiGate .
The second required configuration is an event handler on FortiAnalyzer . The guide explains that "Event handlers generate events" and that "FortiAnalyzer uses event handlers to filter all incoming logs. If logs match the conditions configured in an event handler, FortiAnalyzer generates an event." Since FortiAnalyzer must detect the attack from the received logs before notifying the root FortiGate, an event handler is required on FortiAnalyzer.
Option B is incorrect because the study guide does not identify a LOCALHOST task as the required configuration for this attack-alert flow. Option C is also incorrect because the question asks what must be configured to enable the automated alert workflow . An IPS profile may detect some attacks, but the required automation path in the study guide is specifically event handler on FortiAnalyzer + stitch on the root FortiGate .
NEW QUESTION # 21
Refer to the exhibit.
A partial Application Sensor profile is shown. When you apply this profile in firewall policy, which two statements are correct? (Choose two answers)
Answer: C,D
Explanation:
The correct answers are A and C . The study guide explains that "You can use application control signatures to detect OT protocols" and that application control provides "granular message type identification." In the exhibit, the Operational Technology application category is included in the Application Sensor profile, so OT application signatures are enabled in this profile.
Option C is also correct because the override table shows Modbus_Read.Holding.Registers = Allow and Modbus = Block . The study guide states that you can use specific granular application control signatures to allow a specific Modbus command and block all others , and it also shows that application control can identify read and write commands separately at message level. Therefore, Modbus write commands are blocked by this profile.
Option B is incorrect because the profile is not simply monitoring all OT protocols; it contains a Block action for Modbus. Option D is incorrect because the study guide links OT protocol visibility specifically to the monitor status , while in the exhibit Modbus_Read.Holding.Registers is set to Allow , not Monitor .
NEW QUESTION # 22
In the Purdue model, at which level are physical assets like the Industrial Internet of Things (IIoT) placed?
(Choose one answer)
Answer: D
Explanation:
According to the OT Security 7.6 Architect study guide regarding the Purdue Model :
* Asset Location : The study guide states that " All critical physical assets are located on the plant floor and equipped with IIoT sensors. "
* Level Classification : The " plant floor " is further defined as the " control area zone, " which consists of Levels 0, 1, and 2 .
* Hierarchy : The " Operations & Control " zone is identified as Level 3 and Level 3.5 .
* Direct Answer : In the " Introduction " lesson ' s Knowledge Check , the specific question " In the Purdue model, at which level are IIoTs placed? " is provided with the verified answer: Below Level 3.5 .
NEW QUESTION # 23
Refer to the exhibit.
The OT devices behind the ruggedized FortiGate have vulnerabilities and you want to apply a virtual patching profile in the firewall policy. Why is Virtual Patching not available in the Security Profiles section? (Choose one answer)
Answer: B
Explanation:
The correct answer is A. You must enable Virtual Patching in the Feature Visibility section .
The study guide states clearly that "By default, virtual patching profiles are hidden on the GUI, and you must enable them through System > Feature Visibility." That exactly matches the situation in the exhibit, where Virtual Patching does not appear under Security Profiles . So the issue is not that the feature is unsupported, but that it is simply hidden in the GUI until it is enabled.
The other options do not answer the question being asked. A valid OT security service license is required for virtual patching signatures and protection workflow, and OT signatures are relevant to IPS-based OT protection, but those do not explain why the menu item itself is missing from the Security Profiles section .
The guide specifically identifies Feature Visibility as the reason the Virtual Patching profile is not shown in the GUI. Therefore, the required action is to enable Virtual Patching in System > Feature Visibility .
NEW QUESTION # 24
Refer to the exhibits.
A partial view of the Playbook Monitor page and the corresponding playbook configuration are shown.
Based on the monitor page and the configuration of the playbook, what has triggered the Run_Report task?
(Choose one answer)
Answer: D
Explanation:
Based on the provided exhibits from the FortiAnalyzer playbook engine:
* Playbook Trigger Condition : The Partial Playbook configuration exhibit shows that the playbook is set to trigger based on a condition where the Basic Handler Name is Equal To IPS_Attack_Handling.
* Event vs. Log : In FortiAnalyzer, the field Basic Handler Name is a property of an Event record, indicating the specific Event Handler that generated it. A playbook configured with this condition is triggered by an Event , not directly by a raw log.
* Playbook Execution Flow : The Partial Playbook Monitor view shows the execution sequence:
* Event_Trigger (Starter) : This is the entry point of the playbook, which matches the condition defined in the configuration.
* IPS_Attack_Incident : The first task executed after the trigger.
* Run_Report : The task in question, which is executed as part of the automated workflow initiated by the starter.
* Conclusion : Since the playbook ' s " Starter " is defined by the IPS_Attack_Handling handler name, an event produced by that handler is the root trigger for the entire playbook execution, including the Run_Report task.
Therefore, the Run_Report task was triggered (as part of the playbook) by an IPS_Attack_Handling event .
NEW QUESTION # 25
......
The best reason for choosing our NSEI_OTS_AR-7.6 exam torrent as your training materials is its reliability and authenticity. Our latest NSEI_OTS_AR-7.6 vce dumps aimed to meet your exam requirements and making it easy for you to obtain high passing score in the NSEI_OTS_AR-7.6 Actual Test. The learning materials provided by our website cover most of key knowledge of NSEI_OTS_AR-7.6 practice exam and the latest updated exam information.
NSEI_OTS_AR-7.6 Downloadable PDF: https://www.actualtorrent.com/NSEI_OTS_AR-7.6-questions-answers.html