P.S. Free & New HPE7-A01 dumps are available on Google Drive shared by Prep4pass: https://drive.google.com/open?id=1DtioOZUZcx8Hp96cWIRzffKrr9QFTbGu
We offer you free update for one year if you buy HPE7-A01 training materials from us. That is to say, in the following year, you will get the latest version once the HPE7-A01 exam dumps update. It can save your money for buying new version. In addition, the HPE7-A01 learning materials of us is compiled by experienced experts, and the quality can be guaranteed, you can pass your exam just one time by using ourHPE7-A01 Exam Dumps. We also have online and offline service stuff, if you have any question, you can consult us.
| Section | Weight | Objectives |
|---|---|---|
| Topic 1: Security | 9% | - Network Security
|
| Topic 2: Authentication & Authorization | 8% | - AAA Configuration
|
| Topic 3: Troubleshooting | 6% | - Wired and Wireless Troubleshooting
|
| Topic 4: Monitoring & Management | 6% | - Network Monitoring Tools
|
| Topic 5: WLAN Technologies | 17% | - Wireless LAN Implementation
|
| Topic 6: Network Connectivity & Architecture | 8% | - Connectivity
|
| Topic 7: Switching & Layer 2/3 Technologies | 14% | - Campus Switching
|
| Topic 8: Network Fundamentals | 4% | - Network Stack
|
| Topic 9: Routing | 13% | - Routing Implementation
|
| Topic 10: Performance Optimization | 7% | - QoS and Optimization
|
The pass rate of HPE7-A01 study materials are 98.95%, if you buy HPE7-A01 study material from us, we can ensure you pass the exam successfully. Besides you can get HPE7-A01 exam dumps in ten minutes after your payment. You can use the HPE7-A01 exam dumps freely, if you have any questions in the process of your learning, you can consult the service stuff, and they have the professional knowledge about HPE7-A01 Learning Materials, so don’t hesitate to ask for help from them.
NEW QUESTION # 161
A client is connecting to 802.1X SSID that has been configured in tunnel mode with the default AP-group settings.
After receiving Access-Accept from the RADIUS server, the Aruba Gateway will send Access-Accept to the AP through which tunnel?
Answer: B
Explanation:
According to the Aruba Documentation Portal1, 802.1X is a standard for port-based network access control that uses a RADIUS server to authenticate and authorize wireless clients. 802.1X can be configured in different modes, such as bridge mode, tunnel mode, or split tunnel mode.
Option C: GRE tunnel
This is because option C shows how to configure an SSID in tunnel mode with the default AP-group settings on an Aruba switch. In tunnel mode, all client traffic from the access points is tunneled back to the controller and the controller would in turn put the client traffic onto the network2. The GRE protocol is used to encapsulate and decapsulate the traffic between the access points and the controller3.
Therefore, option C is correct.
1:
https://www.arubanetworks.com/techdocs/AOS-CX/10.06/HTML/5200-7696/GUID-581D2976-694B-46C7-849
https://community.arubanetworks.com/discussion/bridge-and-tunnel-mode 3:
https://www.twingate.com/blog/ipsec-tunnel-mode
NEW QUESTION # 162
List the WPA 4-Way Handshake functions in the correct order.
Answer:
Explanation:
Explanation:
Proves knowledge of the PMK
Exchanges messages for generating PTK
Distributes an encrypted GTK to the client
Sets first initialization vector (IV)
NEW QUESTION # 163
When setting up an Aruba CX VSX pair, which information does the Inter-Switch Link Protocol configuration use in the configuration created?
Answer: B
Explanation:
Explanation
UDLD (Unidirectional Link Detection) is the information that the Inter-Switch Link Protocol configuration uses in the configuration created for Aruba CX VSX pair inter-switch-link. UDLD is a protocol that detects unidirectional links between switches and prevents loops or black holes in the network. UDLD is enabled by default on all ports that are part of the inter-switch-link between VSX peers. The other options are incorrect because they are either not related to inter-switch-link or not supported by Aruba CX VSX. References:
https://www.arubanetworks.com/techdocs/AOS-CX/10.04/HTML/5200-6728/bk01-ch07.html
https://www.arubanetworks.com/techdocs/AOS-CX/10.04/HTML/5200-6728/bk01-ch02.html
NEW QUESTION # 164
A company recently deployed new Aruba Access Points at different branch offices Wireless 802.1X authentication will be against a RADIUS server in the cloud. The security team is concerned that the traffic between the AP and the RADIUS server will be exposed.
What is the appropriate solution for this scenario?
Answer: A
Explanation:
This is the appropriate solution for this scenario where wireless 802.1X authentication will be against a RADIUS server in the cloud and the security team is concerned that the traffic between the AP and the RADIUS server will be exposed. RadSec, also known as RADIUS over TLS, is a protocol that provides encryption and authentication for RADIUS traffic over TCP and TLS. RadSec can be configured on both the AP and the RADIUS server to establish a secure tunnel for exchanging RADIUS packets. The other options are incorrect because they either do not provide encryption or authentication for RADIUS traffic or do not involve RadSec.References:
https://www.securew2.com/blog/what-is-radsec/https://www.cloudradius.com/radsec-vs-radius/
NEW QUESTION # 165
Refer to Exhibit:
With Access-1, What needs to be identically configured With MSTP to load-balance VLANS?
Answer: D
Explanation:
Explanation
The correct answer is B. Spanning-tree instance VLAN mapping.
To load-balance VLANs with MSTP, you need to configure the same VLAN-to-instance mapping on all switches in the same MST region. This means that you need to assign different VLANs to different MST instances, and then adjust the spanning tree parameters (such as priority, cost, or port role) for each instance to achieve the desired load balancing. For example, you can make one switch the root for instance 1 and another switch the root for instance 2, and then map half of the VLANs to instance 1 and the other half to instance 2.
According to the Cisco document Understand the Multiple Spanning Tree Protocol (802.1s), one of the steps to configure MST is:
Split your set of VLANs into more instances and configure different MST settings for each of these instances. In order to easily achieve this, elect Bridge D1 to be the root for VLANs 501 through 1000, and Bridge D2 to be the root for VLANs 1 through 500. These statements are true for this configuration:
Switch D1(config)#spanning-tree mst configuration
Switch D1(config-mst)#instance 1 vlan 501-1000
Switch D1(config-mst)#exit
Switch D1(config)#spanning-tree mst 1 priority 0
Switch D2(config)#spanning-tree mst configuration
Switch D2(config-mst)#instance 2 vlan 1-500
Switch D2(config-mst)#exit
Switch D2(config)#spanning-tree mst 2 priority 0
The above commands create two MST instances, 1 and 2, and map VLANs 501-1000 to instance 1 and VLANs 1-500 to instance 2. Then, they make switch D1 the root for instance 1 and switch D2 the root for instance 2.
The other options are incorrect because:
A: Spanning-tree bpdu-guard setting is a security feature that disables a port if it receives a BPDU from an unauthorized device. It does not affect load balancing with MSTP.
C: Spanning-tree CIST mapping is not a valid command. CIST stands for Common and Internal Spanning Tree, which is the spanning tree instance that runs within an MST region and interacts with other regions or non-MST switches.
D: Spanning-tree root-guard setting is another security feature that prevents a port from becoming a root port if it receives superior BPDUs from another switch. It does not affect load balancing with MSTP.
NEW QUESTION # 166
......
For candidates who prefer a more flexible and convenient option, HP provides the HPE7-A01 PDF file, which can be easily printed and studied at any time. The PDF file contains the latest real Aruba Certified Campus Access Professional Exam (HPE7-A01) questions, and HPE7-A01 ensures that the file is regularly updated to keep up with any changes in the exam's content.
HPE7-A01 Updated Dumps: https://www.prep4pass.com/HPE7-A01_exam-braindumps.html
P.S. Free 2026 HP HPE7-A01 dumps are available on Google Drive shared by Prep4pass: https://drive.google.com/open?id=1DtioOZUZcx8Hp96cWIRzffKrr9QFTbGu