JN0-364 Study Tool | New JN0-364 Dumps Free

P.S. Free & New JN0-364 dumps are available on Google Drive shared by Exam4Tests: https://drive.google.com/open?id=1BnIqelVZnnjPdcPdANozeXIpLaP0Q7P2

Exam4Tests is a website to provide Juniper certification exam training tool for people who attend Juniper certification exam examinee. Exam4Tests's training tool has strong pertinence, which can help you save a lot of valuable time and energy to pass JN0-364 certification exam. Our exercises and answers and are very close true JN0-364 examination questions. IN a short time of using Exam4Tests's simulation test, you can 100% pass the exam. So spending a small amount of time and money in exchange for such a good result is worthful. Please add Exam4Tests's training tool in your shopping cart now.

Juniper JN0-364 Exam Syllabus Topics:

SectionObjectives
Topic 1: Multiprotocol Label Switching (MPLS)- Identify the concepts, operation, or functionality of MPLS CoS processing on Junos devices
  • 1. LDP
  • 2. MPLS and routing tables
  • 3. RSVP
  • 4. Segment routing with MPLS
  • 5. Labels and the label information base
  • 6. MPLS terminology
  • 7. MPLS packet header
  • 8. End-to-end packet flow and forwarding
- Demonstrate knowledge of how to configure, monitor, or troubleshoot MPLS
  • 1. RSVP-signaled Label-Switched Paths (LSPs)
  • 2. Shortest path segment-routing LSPs
  • 3. LDP-signaled Label-Switched Paths (LSPs)
  • 4. MPLS forwarding
Topic 2: Intermediate System to Intermediate System (IS-IS)- Identify the concepts, operation, or functionality of IS-IS
  • 1. Type, length, values (TLVs)
  • 2. Link-state database
  • 3. Adjacencies and neighbors
  • 4. Levels and areas
  • 5. Metrics
  • 6. Designated intermediate system (DIS)
  • 7. IS-IS protocol data units (PDUs)
- Demonstrate knowledge of how to configure, monitor, or troubleshoot IS-IS
  • 1. Troubleshooting tools
  • 2. Interfaces and adjacencies
  • 3. Routing policy application
Topic 3: Open Shortest Path First (OSPF)- Demonstrate knowledge of how to configure, monitor, or troubleshoot OSPF
  • 1. Troubleshooting tools
  • 2. Interfaces and neighbor
  • 3. Routing policy application
- Identify the concepts, operation, or functionality of OSPF
  • 1. Link-state database
  • 2. Adjacencies and neighbors
  • 3. Router ID
  • 4. Designated router and backup designated router
  • 5. Link-state advertisement (LSA) packet type
  • 6. OSPF packet types
  • 7. OSPF area and router types
Topic 4: Spanning Tree Protocols- Demonstrate knowledge of how to configure, monitor, or troubleshoot Spanning Tree Protocols
  • 1. MSTP
  • 2. STP
  • 3. VSTP
  • 4. RSTP
- Identify the concepts, operation, or functionality of STP
  • 1. MSTP
  • 2. STP
  • 3. VSTP
  • 4. RSTP
Topic 5: IPv6- Demonstrate knowledge of how to configure, monitor, or troubleshoot IPv6
- Identify the concepts, operation, or functionality of IPv6
  • 1. Dynamic routing - OSPFv3, IS-IS, BGP
  • 2. IPv6 over IPv4 tunneling
  • 3. Static routes
Topic 6: Layer 2 Bridging or VLANs- Identify the concepts, operation, or functionality of Layer 2 bridging for the Junos OS
  • 1. Virtual Switches
  • 2. Bridging elements and terminology
  • 3. Provider bridging (Q-in-Q tunneling)
  • 4. Service provider switching platforms
  • 5. Frame processing
- Demonstrate knowledge of how to configure, monitor, or troubleshoot Layer 2 bridging or VLANs
  • 1. Interfaces and ports
  • 2. Provider bridging
  • 3. IRB
  • 4. VLANs
- Identify the concepts, benefits, or functionality of VLANs
  • 1. Integrated Routing and Bridging (IRB)
  • 2. Tagging
  • 3. Port modes
Topic 7: Protocol-Independent Routing- Demonstrate knowledge of how to configure, monitor, or troubleshoot various protocol-independent routing components
  • 1. Load balancing
  • 2. Filter-based forwarding
  • 3. Static, aggregate, and generated routes
- Identify the concepts, operation, or functionality of various protocol-independent routing components
  • 1. Martian addresses
  • 2. Load balancing
  • 3. Filter-based forwarding
  • 4. Routing instances, including routing information base (RIB) (also known as routing table) group
  • 5. Static, aggregate, and generated routes
Topic 8: Border Gateway Protocol (BGP)- Demonstrate knowledge of how to configure, monitor, or troubleshoot BGP
  • 1. Troubleshooting tools
  • 2. Peers and peer groups
  • 3. Routing policy application
- Identify the concepts, operation, or functionality of BGP
  • 1. BGP message types
  • 2. Route selection process
  • 3. BGP route reflection and confederations
  • 4. BGP basic operation
  • 5. Attributes
  • 6. IBGP and EBGP functionality and interaction

>> JN0-364 Study Tool <<

Free PDF Quiz JN0-364 - Service Provider Routing and Switching, Specialist (JNCIS-SP) Updated Study Tool

We would like to benefit our customers from different countries who decide to choose our JN0-364 study guide in the long run, so we cooperation with the leading experts in the field to renew and update our JN0-364 study materials. We can assure you that you will get the latest version of our JN0-364 Training Materials for free from our company in the whole year after payment. Do not miss the opportunity to buy the best JN0-364 preparation questions in the international market which will also help you to advance with the times.

Juniper Service Provider Routing and Switching, Specialist (JNCIS-SP) Sample Questions (Q92-Q97):

NEW QUESTION # 92
A BGP router receives two routes to the same prefix. One route has a higher local preference, while the other has a shorter AS path.
In this scenario, which route would be selected?

Answer: C

Explanation:
Local preference is evaluated before the AS path length in the BGP best-path selection process.
A route with a higher local preference is therefore preferred even if another route has a shorter AS path.


NEW QUESTION # 93
An OSPF router does not have a router ID configured.
In this scenario, which statement is correct about the router ID?

Answer: C

Explanation:
The router identifier is used by BGP and OSPF to identify the routing device from which a packet originated. The router identifier usually is the IP address of the local routing device. If you do not configure a router identifier, the IP address of the first interface to come online is used. This is usually the loopback interface. Otherwise, the first hardware interface with an IP address is used In OSPF, if a router ID is not manually configured, Junos OS will automatically select the router ID based on the highest IP address of any of the router's loopback interfaces. If no loopback interface exists, the highest IP address of any active interface will be used. Therefore, answer C is correct.


NEW QUESTION # 94
You must ensure that your routing platform with redundant REs continues to forward packets, even if one RE fails. Which technology would you use to accomplish this task?

Answer: B

Explanation:
For Juniper platforms equipped with dualRouting Engines (REs), the fundamental technology required to provide high availability during a hardware or software failure of the primary RE isGraceful Routing Engine Switchover (GRES).
According to Juniper Networks technical documentation, GRES allows the backup RE to stay in a "hot" standby state. When GRES is enabled, the primary RE synchronizes critical state information with the backup RE, specifically thechassis stateand theinterface state. This synchronization includes the Packet Forwarding Engine (PFE) configuration.
When the primary RE fails, the backup RE takes over immediately. Because the PFE (which resides on the line cards) was already synchronized and is not restarted during the switchover, the routercontinues to forward packetsthat are already in flight or part of established flows. This prevents a complete network outage during an RE failover.
Comparison with other options:
* NSB (Non-Stop Bridging - Option A):Focuses specifically on maintaining Layer 2 protocol states (like STP) during a switchover.
* LAG (Link Aggregation - Option B):Provides redundancy for physical links, not the control plane or the RE.
* BFD (Bidirectional Forwarding Detection - Option C):Is a protocol used for rapid detection of link or neighbor failures; it does not protect the RE or maintain forwarding during an internal switchover.
It is important to note that while GRES maintains theforwardingstate, it does not by itself maintain therouting protocolstate (adjacencies). To keep OSPF or BGP sessions from dropping during the switchover, GRES must be paired withNon-Stop Active Routing (NSR). However, as the question focuses on the core requirement of continuing to forward packets,GRESis the foundational technology.


NEW QUESTION # 95
Which two statements are correct about the way that BGP propagates routes by default?
(Choose two.)

Answer: A,C

Explanation:
By default, BGP will propagate routes learned from EBGP peers to other IBGP peers. However, due to the BGP split-horizon rule, routes learned from one IBGP peer are not re-advertised to another IBGP peer. This behavior is designed to prevent routing information loops within the same AS.


NEW QUESTION # 96
You are asked to configure interfaces on Juniper devices to support dual VLAN tags.
In this scenario, which two interface statements would accomplish this task? (Choose two.)

Answer: C,D

Explanation:
Flexible VLAN tagging enables an interface to support multiple VLAN tagging formats, including QinQ configurations that use two VLAN tags.
Stacked VLAN tagging enables the interface to process double-tagged Ethernet frames, allowing an outer service VLAN tag to be added to an inner customer VLAN tag for QinQ deployments.


NEW QUESTION # 97
......

You don't need to wait days or weeks to get your performance report. The software displays the result of the Juniper JN0-364 practice test immediately, which is an excellent way to understand which area needs more attention. Exam4Tests Juniper JN0-364 exam dumps save your study and preparation time. Our experts have added hundreds of Service Provider Routing and Switching, Specialist (JNCIS-SP) (JN0-364) questions similar to the real exam. You can prepare for the Service Provider Routing and Switching, Specialist (JNCIS-SP) (JN0-364) exam dumps during your job. You don't need to visit the market or any store because Exam4Tests Service Provider Routing and Switching, Specialist (JNCIS-SP) (JN0-364) exam questions are easily accessible from the website. You can try the Juniper JN0-364 exam dumps demo before purchasing.

New JN0-364 Dumps Free: https://www.exam4tests.com/JN0-364-valid-braindumps.html

What's more, part of that Exam4Tests JN0-364 dumps now are free: https://drive.google.com/open?id=1BnIqelVZnnjPdcPdANozeXIpLaP0Q7P2