Fortinet certification will be a qualification assess standard for experienced workers, it is also a breakthrough for some workers who are in bottleneck. NSEI_OTS_AR-7.6 new test camp materials are a good helper. For most IT workers it also increases career chances. For companies one certification increases strong competitive power. NSEI_OTS_AR-7.6 New Test Camp materials will make you stand out from peers in this field applicable in all over the world.
| Section | Objectives |
|---|---|
| Topic 1: Monitoring and Risk Assessment | - Analyze security reports from FortiAnalyzer - Create FortiAnalyzer event handlers - Perform risk assessment and management |
| Topic 2: Network Security | - Configure virtual patching - Configure security inspections for industrial protocols - Configure automation |
| Topic 3: Asset Management | - Explain OT standards and Fortinet compliance - Use Fortinet Security Fabric for an OT network - Implement device detection on FortiGate and FortiNAC |
| Topic 4: Network Access Control | - Configure network segmentation schemas - Explain OT Ethernet concepts - Configure network access authentication |
>> New NSEI_OTS_AR-7.6 Test Braindumps <<
First and foremost, in order to cater to the different needs of people from different countries in the international market, we have prepared three kinds of versions of our NSEI_OTS_AR-7.6 learning questions in this website. Second, we can assure you that you will get the latest version of our NSEI_OTS_AR-7.6 training materials for free from our company in the whole year after payment on NSEI_OTS_AR-7.6 practice materials. Last but not least, we will provide the most considerate after sale service for our customers in twenty four hours a day seven days a week on our NSEI_OTS_AR-7.6 exam questions.
NEW QUESTION # 38
Refer to the exhibit.
A partial Application Sensor profile is shown. When you apply this profile in a firewall policy, which two statements are correct? (Choose two answers)
Answer: A,C
Explanation:
The correct answers are A and C .
Option C is correct because the profile clearly contains the Operational Technology category and specific OT application signatures such as Modbus and IEC.60870.5.104 . The study guide says "You can use application control signatures to detect OT protocols" and "You can filter to a specific OT protocol." That means OT application signatures are active in this sensor profile.
Option A is correct because the guide explains that application control works at different levels: "Detection of protocol (one detection per session)" and "Message level (one detection per protocol message)." It also says you can use application signatures for "granular message type identification." In the exhibit, IEC.
60870.5.104.Control.Functions is explicitly configured, which is a granular IEC message/control-level signature rather than only a protocol-level match. That means logging and control can occur at the IEC command level.
Option B is not correct because the profile shows Modbus configured at the parent protocol level as Monitor
, while the guide states that the "parent signature takes precedence over the child signature." Since protocol-level detection is one detection per session , that does not mean FortiGate will necessarily log each Modbus command individually.
Option D is incorrect because even though the broader Operational Technology category is set to block, the profile includes specific application and filter overrides for Modbus and IEC 104 behavior. So the resulting effect is not simply that all OT protocols are blocked .
NEW QUESTION # 39
Refer to the exhibit.
A simplified OT network is shown. You want to optimize the protection of this OT network. Which two controls must you implement? (Choose two answers)
Answer: A,D
Explanation:
The correct answers are B. IPS on FortiGate_Level5 and C. Virtual patching on FortiGate_Level2 .
The study guide explains that "the first line of defense is securing the IT side of your network" and that FortiGate should be placed to protect ICS environments and stop threats from propagating from IT into OT. It also states that IPS improves OT security because "today's threat landscape requires IPS to block a wider range of threats and improve OT security" and that in IPS mode, vulnerable devices are protected . This makes FortiGate_Level5 , at the upper boundary near the DMZ and external connectivity, the correct place to implement IPS as a primary protection control.
The study guide also states in the Purdue model section that "Level 2 consists of the processes and programs that control the PLCs, RTUs, and IEDs found at Level 1" and that "it is necessary to segment, or even microsegment, these servers with firewall segmentation, along with policies that include application control and virtual patching." In addition, the virtual patching section says "Virtual patching protects OT devices that have not yet been updated against vulnerability exploits" and applies when traffic related to the vulnerable device reaches the firewall policy. Since FortiGate_Level2 sits between the process network and the control network, it is the right enforcement point for virtual patching to protect the PLC-side assets.
Option A is not one of the best answers because offline IDS only detects and logs attacks; the guide says "no traffic flows through FortiGate" in offline IDS mode, whereas IPS can actually block threats. Option D is also not the best answer because OT signatures are enabled within the IPS framework, but the stronger control explicitly described for this design is to deploy IPS at the upper boundary and virtual patching closer to vulnerable OT devices .
NEW QUESTION # 40
Refer to the exhibit.
A Logical Topology page of a FortiGate device is shown. Your OT company wants to gain visibility into the network. You decide to implement device detection with the Security Fabric. Based on the exhibit, which statement is correct? (Choose one answer)
Answer: C
Explanation:
The correct answer is A. Device Detection is enabled on the other identified device .
The study guide explains that device identification is a "useful feature for the Security Fabric topology view" and that "FortiGate detects most third-party devices in your network and adds them to the topology view of the Security Fabric." It also states that in the interfaces section, you can enable device detection , and this detection is what allows FortiGate to identify devices based on observed traffic.
In the exhibit, the tooltip distinguishes between "1 device requires authorization" and "1 other identified device." That means the unauthorized device is a separate FortiGate/Fabric member issue, while the other identified device is simply a detected third-party device shown in the topology because device detection is working. Therefore, the correct interpretation is that device detection is enabled for that identified device.
Option B is incorrect because the exhibit does not say the other identified device requires authorization.
Option C is not supported by the study guide, and option D is too specific because no evidence in the exhibit confirms that the detection was enabled specifically on port3 .
NEW QUESTION # 41
Refer to the exhibit.
A partial OT network is shown.
PLC-1 has a known critical vulnerability, but you cannot update it.
What must you configure to protect PLC-1?
Answer: C
Explanation:
The correct answer is C . This scenario is the precise use case for virtual patching . The OT Security 7.6 study guide states that virtual patching protects OT devices that have not yet been updated against vulnerability exploits . FortiGate identifies the vulnerable asset, queries FortiGuard for device-specific vulnerabilities and mitigation rules, receives applicable OT virtual-patching signatures, and maps those rules to the device. When traffic associated with the vulnerable asset reaches FortiGate, the firewall policy containing the virtual-patching profile applies the protection. In the topology, FortiGate_Level2 is the enforcement point immediately protecting PLC-1 and the control-network assets. IPS at Level 5 provides broader perimeter protection, but it is not the device-specific compensating control requested here.
Application Control primarily regulates industrial protocols and commands. Therefore, Virtual patching on FortiGate_Level2 is required.
NEW QUESTION # 42
Refer to the exhibit.
A partial OT network is shown.
You have recently removed the air gap in the network to provide full connectivity.
What must you configure to protect your OT network from external attacks?
Answer: B
Explanation:
The correct answer is D . Removing the air gap creates connectivity between the OT environment and external networks, significantly increasing exposure to unauthorized access and cyberattacks. Fortinet explains that the expansion of remote connectivity and IT/OT interconnections increases the OT attack surface and that the modern threat landscape requires IPS to block a wider range of threats . In the shown Purdue-style topology, FortiGate_Level5 is positioned at the upper boundary toward external connectivity and is therefore the appropriate enforcement point for protecting against attacks entering from outside the OT environment. Virtual patching at Level 2 is intended primarily to compensate for known vulnerabilities on specific OT devices that cannot yet be patched. Application Control provides industrial protocol visibility and command-level control, while merely enabling OT signatures at Level 3 does not replace perimeter intrusion prevention. Consequently, IPS belongs on FortiGate_Level5 .
NEW QUESTION # 43
......
Customizable Fortinet NSE I - OT Security 7.6 Architect (NSEI_OTS_AR-7.6) exam conditions in such a way that you can create your desired NSEI_OTS_AR-7.6 exam with pre-determined questions and exam duration. You will be able to see instant results after going through the NSEI_OTS_AR-7.6 Practice Exam To confirm the product licence. For customer satisfaction, VCEPrep has also designed a Fortinet NSE I - OT Security 7.6 Architect (NSEI_OTS_AR-7.6) demo version so the candidate can assure the reliability of the Fortinet PDF Dumps.
NSEI_OTS_AR-7.6 Latest Exam Labs: https://www.vceprep.com/NSEI_OTS_AR-7.6-latest-vce-prep.html