DOWNLOAD the newest Pass4guide JN0-364 PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=1pfIy4O6lXHl-KSy6o5d2L6f4UuvbTiff
These formats are JN0-364 web-based practice test software, desktop practice exam software, and Service Provider Routing and Switching, Specialist (JNCIS-SP) (JN0-364) PDF dumps files. All these three Juniper JN0-364 exam questions formats are easy to use and compatible with all devices and the latest web browsers. Just choose the right Service Provider Routing and Switching, Specialist (JNCIS-SP) (JN0-364) exam dumps format and start JN0-364 exam questions preparation today.
| Section | Weight | Objectives |
|---|---|---|
| Border Gateway Protocol (BGP) | 20-25% | - IBGP and EBGP - Configuration and troubleshooting - Path selection and attributes - Policy and route filtering - Basic operation and message types |
| Open Shortest Path First (OSPF) | 15-20% | - LSA types and operation - Configuration and troubleshooting - Areas and router types - Link-state database |
| Spanning Tree Protocols | 8-12% | - Configuration and convergence - Port roles and states - BPDU and protection features - STP, RSTP, MSTP, VSTP |
| Intermediate System to Intermediate System (IS-IS) | 10-15% | - Metrics and wide metrics - PDUs and TLVs - Adjacencies and levels - Configuration and monitoring |
| Multiprotocol Label Switching (MPLS) | 12-18% | - Terminology and forwarding - Segment routing basics - LDP and RSVP - Configuration and monitoring - Labels and LIB |
| High Availability | 5-8% | - Graceful restart - Nonstop active routing - NSR and GRES concepts |
| Layer 2 Bridging and VLANs | 8-12% | - VLANs and trunking - Bridging concepts - Service provider switching features |
| IPv6 | 8-12% | - Autoconfiguration - Address types and format - Static and dynamic routing - OSPFv3 and BGP for IPv6 |
| Protocol-Independent Routing | 10-15% | - Load balancing - Static, aggregate, and generated routes - Filter-based forwarding - Routing instances and RIB groups - Martian addresses |
| Tunnels | 5-8% | - GRE and IP-IP tunnels - Tunnel configuration and usage |
>> New JN0-364 Test Discount <<
After years of research in IT exam certification, our Pass4guide has become a leader of IT industry. Our exam software is consisted of comprehensive and diverse questions. JN0-364 exam software, as one of the most popular software with best sales, has helped many candidates successfully Pass JN0-364 Exam. Besides, as we know, once you have obtain JN0-364 exam certification, your career in IT industry will be much easier.
NEW QUESTION # 68
You are asked to configure an RSVP LSP.
Under which hierarchy is this configuration performed?
Answer: D
Explanation:
RSVP-signaled LSPs are configured under the protocols mpls hierarchy in Junos OS. The label- switched-path configuration that defines the LSP parameters, destination, bandwidth, and path options is placed under this hierarchy, while the protocols rsvp hierarchy is used only to enable and control RSVP signaling on interfaces.
NEW QUESTION # 69
Click the Exhibit button. The routers shown in the exhibit are configured for segment routing. In this scenario, what is the adjacency SID that Router B advertises to Router A?
Answer: C
Explanation:
The diagram you provided shows two routers, Router A and Router B, with MPLS labels between them. In the context of segment routing with MPLS, each router advertises a set of SIDs (Segment Identifiers). These SIDs can be node SIDs, which are associated with the router itself, or adjacency SIDs, which are associated with the links between routers.
Given the information from the exhibit:
Router A has a Router ID of 10.1.1.1 and is associated with the MPLS label 11. Router B has a Router ID of 10.1.1.2 and is associated with the MPLS label 12. The adjacency SID in segment routing is used to identify a specific adjacency between two routers. In this case, the question is asking for the adjacency SID that Router B advertises to Router A. This would be the label that Router B tells Router A to use to send packets directly to Router B over their shared adjacency.
So, the adjacency SID that Router B advertises would be associated with the link that Router A would use to send traffic to Router B, which is labeled with the number 12 in the exhibit.
NEW QUESTION # 70
Click the Exhibit button.
Referring to the exhibit, which two statements are correct? (Choose two.)
Answer: A,C
Explanation:
All listed ports are in the designated role and forwarding state, and the designated bridge ID shown matches the local bridge ID, which indicates the device is acting as the root bridge for this spanning-tree instance.
The bridge ID begins with 32768, which corresponds to the default bridge priority of 32,768 (32k).
NEW QUESTION # 71
By default, which routing table contains a list of all ingress LSPs?
Answer: B
Explanation:
Ingress LSPs originate on the router and are installed as routes in the main IPv4 unicast routing table. This table contains the destination prefixes and next-hop information used for normal IP forwarding. When an LSP is configured as the forwarding path, the route in this table points to the LSP as the next hop, making it the table that lists ingress LSP routes by default.
NEW QUESTION # 72
In OSPF, which three fields must match between neighbors before forming an adjacency? (Choose three.)
Answer: B,C,D
Explanation:
For OSPF routers to transition from the "Init" state to a full adjacency, they must agree on several parameters exchanged within theirHello packets. If these parameters do not match, the routers will refuse to form a neighbor relationship, a common point of failure in service provider networks.
According to Juniper Networks documentation, the following fields are mandatory matches:
* Hello Interval (Option B):The frequency at which Hello packets are sent. Default is 10 seconds on broadcast networks.
* Dead Interval (Option D):The time a router waits without receiving a Hello before declaring a neighbor down. Default is 4 times the Hello interval.
* Network Mask (Option C):On broadcast and NBMA (Non-Broadcast Multi-Access) segments, the subnet masks must match because OSPF uses the mask to determine the network boundaries for the link-state advertisements.
* Area ID:Routers must belong to the same logical OSPF area.
* Authentication:If configured, the type and password/key must be identical.
Why other options are incorrect:
* Router Priority (Option A):This is used to influence the election of the Designated Router (DR). It doesnotneed to match; in fact, different priorities are often used to ensure a specific router becomes the DR.
* Designated Router (Option E):The DR is theresultof an election that happens after the initial Hello exchange. It is not a field that must match beforehand to start the process.
By ensuring the Hello/Dead timers and the Subnet Mask are synchronized, OSPF guarantees a stable and predictable environment for the subsequent exchange of Link-State Advertisements (LSAs).
NEW QUESTION # 73
......
Never stop challenging your limitations. If you want to dig out your potentials, just keep trying. Repeated attempts will sharpen your minds. Maybe our JN0-364 learning quiz is suitable for you. We strongly advise you to have a brave attempt. You will own a wonderful experience after you learning our JN0-364 Guide practice. As the leader in this career, we have been considered as the most popular exam materials provider. And our JN0-364 practice questions will bring you 100% success on your exam.
JN0-364 Reliable Test Pattern: https://www.pass4guide.com/JN0-364-exam-guide-torrent.html
2026 Latest Pass4guide JN0-364 PDF Dumps and JN0-364 Exam Engine Free Share: https://drive.google.com/open?id=1pfIy4O6lXHl-KSy6o5d2L6f4UuvbTiff