ZertFragen bietet Ihnen die neuesten Schulungsunterlagen zur Huawei H35-581_V2.0 Zertifizierungsprüfung. Die fleißigen IT-Experten von ZertFragen aktualisieren ständig Schulungsunterlagen durch ihre eigene Kompetenz und Erfahrung, so dass die IT-Fachleute die Prüfung mühlos bestehen können. Das Huawei H35-581_V2.0 Zertifikat stellt eine immer wichtigere Stelle in der IT-Branche dar. Und immer mehr Leute haben sich an dieser Prüfung beteiligt. Und viele davon benutzen unsere Produkte von ZertFragen und haben die Huawei H35-581_V2.0 Zertifizierungsprüfung bestanden. Die Feedbacks von diesen Leute haben bewiesen, dass unsere Produkte von ZertFragen eher zuverlässig sind.
| Section | Objectives |
|---|---|
| Radio Network Planning | - Site selection and dimensioning - Coverage planning - Capacity planning |
| Troubleshooting and Performance Enhancement | - Fault diagnosis in 5G networks - Performance tuning methods |
| 5G Radio Network Fundamentals | - 5G NR system architecture and principles - Radio access network basics |
| Radio Network Optimization | - Mobility optimization - Interference analysis and mitigation - KPI analysis and optimization |
>> H35-581_V2.0 Fragen Antworten <<
Ohne Zeitaufwand und Anstrengung die Huawei H35-581_V2.0 Prüfung zu bestehen ist unmöglich, daher bemühen wir uns darum, Ihre Belastung der Vorbereitung auf Huawei H35-581_V2.0 zu erleichtern. Standardisierte Simulierungsrüfung und die leicht zu verstehende Erläuterungen können Ihnen helfen, allmählich die Methode für Huawei H35-581_V2.0 Prüfung zu beherrschen. Um mehr Stress von Ihnen zu beseitigen versprechen wir, falls Sie die Prüfung nicht bestehen, geben wir Ihnen volle Rückerstattung der Huawei H35-581_V2.0 Prüfungsunterlagen nach der Überprüfung Ihres Zeugnisses. ZertFragen ist vertrauenswüdig!
39. Frage
Which of the following statements regarding throughput-related indicators is incorrect?
Antwort: A
Begründung:
Option A is incorrect under the standardized burst-based throughput measurement methodology because including the final small transmission interval can distort the measured throughput.
In NR performance management, throughput measurements are intended to represent radio transmission performance rather than the average application traffic rate across periods containing idle time.
The relevant measurement procedure distinguishes intervals during which the transmission buffer contains data from intervals when the buffer becomes empty.
The final transmission interval of a data burst may carry only a small residual packet. Including its duration and data volume can introduce a packet-size-dependent effect into the calculated throughput.
3GPP TS 28.554 therefore defines an extended throughput measurement method that excludes the final slot of the burst from the applicable calculation.
Option B is correct because average uplink and downlink UE throughput are used to assess radio-network performance as experienced by users.
Option C describes the general relationship between transmitted data volume and applicable active transmission time, subject to the precise measurement definitions.
Option D expresses a comparable throughput relationship at cell level, although its wording is less precise than the standardized KPI definitions.
Therefore, option A contradicts the specified throughput methodology.
Official Reference: 3GPP TS 28.554, Section 6.3.6.2, Extended Definition of Throughput , Figure 1; TS
28.552, 5G Performance Measurements .
40. Frage
Which of the following network-capability requirements apply to vehicle platooning in V2V?
Select All that Apply
Antwort: A,B,C
Begründung:
Vehicle platooning involves multiple vehicles traveling cooperatively while maintaining coordinated distances, speeds, and driving behavior.
Vehicle-to-Vehicle (V2V) communication supports the exchange of information such as vehicle position, velocity, acceleration, braking intentions, and cooperative driving commands.
Option A - 10-40 Mbit/s: The material identifies this data-rate range as a capability requirement for the specified platooning scenario.
Option C - Reliability above 99.999%: The question bank uses this stringent reliability target to characterize communications intended to support safety-critical vehicle coordination.
Option D - Latency of 1-10 ms: This range represents the low-latency objective assumed by the question.
Rapid delivery of coordination messages can be important when vehicles operate with short inter-vehicle gaps.
Option B is excluded under that assumed profile because its upper latency bound is substantially higher.
However, these exact figures are not established as universal vehicle-platooning requirements by 3GPP TS 22.186 . Its vehicle-platooning table specifies scenario-dependent figures, including 10-25 ms latency, reliability values up to 99.99% where explicitly stated, and data-rate requirements that can reach 65 Mbit/s.
Therefore, A, C, and D are the supplied course-bank answer, not an independently standards-confirmed combination.
Official Reference: 3GPP TS 22.186, Section 5.2, Table 5.2-1, Performance Requirements for Vehicles Platooning .
41. Frage
Which of the following timers is specific to 5G networks?
Antwort: B
Begründung:
T319 is the correct answer because it is defined in the 5G New Radio (NR) Radio Resource Control (RRC) specification to supervise the RRC connection resume procedure.
5G NR supports three principal RRC states: RRC_IDLE, RRC_CONNECTED, and RRC_INACTIVE. The RRC_INACTIVE state allows a UE to retain its Access Stratum (AS) context while reducing signaling overhead and power consumption.
When a UE in RRC_INACTIVE needs to resume communication, it initiates the RRC connection resume procedure by transmitting an RRCResumeRequest or RRCResumeRequest1 message. Timer T319 supervises this procedure.
If the UE receives an appropriate RRCResume message, T319 is stopped, and the UE restores the relevant radio-bearer configuration and transitions to RRC_CONNECTED.
If T319 expires before successful completion, the UE performs RRC resume failure handling and enters RRC_IDLE.
The remaining timers are also present in LTE:
T300: Supervises RRC connection establishment.
T310: Supports radio-link failure detection.
T311: Supervises cell selection during RRC connection reestablishment.
Therefore, among the listed options, T319 is specifically associated with the NR RRC connection resume procedure.
Official Reference: 3GPP TS 38.331, Sections 5.3.13.3-5.3.13.5, RRC Connection Resume , and Section
7.1.1, RRC Timers .
42. Frage
Which of the following slot configurations has a relatively large E2E delay?
Antwort: A
Begründung:
Option A is the expected answer because its slot configuration creates a relatively long interval between uplink transmission opportunities, increasing the scheduling-related latency experienced by applicable traffic.
In Time Division Duplex (TDD) operation, uplink and downlink transmissions share the same carrier- frequency resources but occur in different time-domain intervals.
The configured slot pattern determines the distribution of downlink slots, uplink slots, and special slots.
In the 8:2 configuration, the sequence DDDDDDDSUU contains seven consecutive downlink slots, followed by a special slot and two uplink slots.
For 30 kHz subcarrier spacing, a normal slot lasts 0.5 ms, producing a 5 ms configuration period.
Consequently, uplink packets arriving shortly after the available uplink opportunities may experience substantial waiting time before the next usable uplink slot.
The other configurations provide more frequent uplink opportunities, which generally reduces waiting time for uplink transmissions and selected feedback procedures.
Such delays can influence uplink scheduling requests, HARQ timing, and application-level responsiveness.
However, actual end-to-end latency also depends on traffic direction, processing delays, network congestion, retransmissions, and transport-network conditions.
Therefore, option A is the best answer when comparing the scheduling-related latency implications of the listed TDD patterns.
Official Reference: 3GPP TS 38.213, Section 11.1, UE Procedures for Determining Slot Format ; TS
38.331, TDD-UL-DL-ConfigCommon and TDD-UL-DL-ConfigDedicated .
Technical warning / qualification: The comparison assumes similar operating conditions and emphasizes uplink opportunity waiting time. The slot pattern alone does not establish a universally highest end-to-end latency for every traffic flow.
43. Frage
For both the VoNR and EPS fallback solutions, the 5GC must interwork with the IMS.
Antwort: A
Begründung:
The statement is true because both Voice over New Radio (VoNR) and Evolved Packet System (EPS) fallback provide voice services through the IP Multimedia Subsystem (IMS), although the radio-access and core-network procedures used to deliver the voice session differ.
In a VoNR deployment, the UE maintains its connection to the 5G Core (5GC) through NR. IMS signaling and media traffic are transported over an appropriate PDU session, with the 5GC supporting QoS-flow establishment, policy enforcement, and connectivity to the IMS network.
The Session Management Function (SMF) manages the corresponding PDU session, while the User Plane Function (UPF) provides user-plane connectivity toward the IMS data network.
EPS fallback applies when the 5G system cannot provide the required IMS voice service directly over its existing radio access.
In this case, the 5GC and NG-RAN coordinate a handover or redirection toward LTE connected to the EPC.
IMS voice establishment or continuation then takes place over the EPS.
Importantly, EPS fallback does not mean that the voice-media path remains anchored in the 5GC after fallback. It means that the 5G system participates in IMS voice-service support and coordinates access to EPS when necessary.
Official Reference: 3GPP TS 23.501, Sections 5.16.3.1-5.16.3.10, IMS Support and IMS Voice Service via EPS Fallback .
44. Frage
......
Wenn Sie ZertFragen wählen, kommt der Erfolg auf Sie zu. Die Examsfragen zur Huawei H35-581_V2.0 Zertifizierungsprüfung wird Ihnen helfen, die Prüfung zu bestehen. Die Simulationsprüfung vor der Huawei H35-581_V2.0 Zertifizierungsprüfung zu machen, ist ganz notwendig und effizient. Wenn Sie ZertFragen wählen, können Sie 100% die Prüfung bestehen.
H35-581_V2.0 Exam: https://www.zertfragen.com/H35-581_V2.0_prufung.html