We have compiled the NSEI_OTS_AR-7.6 test guide for these candidates who are trouble in this exam, in order help they pass it easily, and we deeply believe that our NSEI_OTS_AR-7.6 exam questions can help you solve your problem. Believe it or not, if you buy our study materials and take it seriously consideration, we can promise that you will easily get the certification that you have always dreamed of. We believe that you will never regret to buy and practice our NSEI_OTS_AR-7.6 latest question as the high pass rate of our NSEI_OTS_AR-7.6 exam questions is 99% to 100%.
| Section | Objectives |
|---|---|
| Monitoring and risk assessment | - Create FortiAnalyzer event handlers - Perform risk assessment and management - Analyze security reports from FortiAnalyzer |
| Network security | - Configure virtual patching - Configure automation - Configure security inspections for industrial protocols |
| Network access control | - Explain OT Ethernet concepts - Configure network access authentication - Configure network segmentation schemas |
| Asset management | - Explain OT standard and Fortinet compliance - Implement device detection on FortiGate and FortiNAC - Fortinet Security Fabric for an OT network |
>> NSEI_OTS_AR-7.6 Certification Practice <<
The ExamTorrent is a leading platform that has been helping the Fortinet NSEI_OTS_AR-7.6 exam aspirants for many years. Over this long time period, thousands of Fortinet NSEI_OTS_AR-7.6 Exam candidates have passed their dream NSEI_OTS_AR-7.6 certification exam and have become a member of Fortinet NSEI_OTS_AR-7.6 certification exam community.
NEW QUESTION # 57
Refer to the exhibit.
A partial OT network is shown.
You have recently removed the air gap in the network to provide full connectivity.
What must you configure to protect your OT network from external attacks?
Answer: A
Explanation:
The correct answer is D . Removing the air gap creates connectivity between the OT environment and external networks, significantly increasing exposure to unauthorized access and cyberattacks. Fortinet explains that the expansion of remote connectivity and IT/OT interconnections increases the OT attack surface and that the modern threat landscape requires IPS to block a wider range of threats . In the shown Purdue-style topology, FortiGate_Level5 is positioned at the upper boundary toward external connectivity and is therefore the appropriate enforcement point for protecting against attacks entering from outside the OT environment. Virtual patching at Level 2 is intended primarily to compensate for known vulnerabilities on specific OT devices that cannot yet be patched. Application Control provides industrial protocol visibility and command-level control, while merely enabling OT signatures at Level 3 does not replace perimeter intrusion prevention. Consequently, IPS belongs on FortiGate_Level5 .
NEW QUESTION # 58
Refer to the exhibit.
Based on the information provided on the partial Event Monitor page shown in the exhibit, how was the attack detected? (Choose one answer)
Answer: C
Explanation:
The correct answer is D. Automatically by an event handler . The study guide explicitly states that "Event handlers generate events on FortiAnalyzer" and "FortiAnalyzer uses event handlers to filter all incoming logs. If the logs received match the conditions set in the event handlers, FortiAnalyzer generates an event." It also says "You can view all generated events on the Event Monitor page." This directly matches the exhibit, which is showing entries on the Event Monitor page. Therefore, the attack shown there was detected automatically through an event handler .
The guide also explains the detection flow: "FortiAnalyzer receives logs," "FortiAnalyzer parses logs," and "FortiAnalyzer generates an event if a rule is matched in an event handler." In addition, the Event Monitor view includes the Handler column, which identifies the event handler that generated the event. That is why the attack is not considered manually detected, and it is not primarily detected by a playbook or stitch.
Playbooks and stitches are used for subsequent automation actions, but the event appearing in Event Monitor is created by the event handler mechanism.
NEW QUESTION # 59
Refer to the exhibit.
An industrial Ethernet protocol skipping layers 3 to 6 is shown. Which industrial Ethernet protocol is it?
(Choose one answer)
Answer: C
Explanation:
The correct answer is D. EtherCAT . The study guide explicitly states under the Ethernet/IP and EtherCAT section that "EtherCAT is a protocol that offers real-time communication in a primary-secondary configuration" and "EtherCAT skips layers 3 to 6 to deliver real-time communication." It also adds that
"the most important feature of this protocol is that secondary devices collect only the information they need from the data packets." This matches the exhibit exactly, where the diagram shows Real-Time Data above a Proprietary MAC and Proprietary physical layer , reflecting the protocol structure that bypasses the intermediate OSI layers.
The other options do not match this behavior. The guide says POWERLINK uses layer 2 and layer 7 of the OSI model, not that it skips layers 3 to 6. It also explains that Ethernet/IP is the industrial protocol based entirely on Ethernet standards and adapts to the OSI model. Modbus is described as an open client/server protocol and is not suitable for transmitting data in real time . Therefore, the protocol in the exhibit is clearly EtherCAT .
NEW QUESTION # 60
You want to improve access control for your large OT network using passive authentication. What must you configure on FortiGate? (Choose one answer)
Answer: B
Explanation:
The correct answer is A. Fortinet Single-Sign On (FSSO) . The study guide states under Active and Passive Authentication that for passive authentication, "User does not receive a login prompt from FortiGate" ,
"Credentials are determined automatically" , and specifically "FSSO, RSSO, and NTLM can be used." It then explains that passive authentication occurs with the single sign-on method and explicitly identifies Fortinet SSO (FSSO) as one of those methods.
The guide also says: "For passive authentication, you can implement FSSO. FSSO allows users who have already authenticated on the network through another system to be transparently identified. After initial login to any system on the network, users can access allowed resources without being prompted for credentials." That is exactly what the question asks for: improving access control in a large OT network using passive authentication .
The other options do not match passive authentication. Local users are part of local authentication, two- factor authentication adds an extra security factor but still uses active authentication, and FortiAuthenticator as a remote server supports centralized authentication for mid-to-large networks, but by itself it is not the specific passive-authentication method being asked here. The study guide is explicit that the FortiGate configuration for passive authentication is FSSO .
NEW QUESTION # 61
According to the IEC 62443 standard, your security level is 4 . What is your OT environment defending against? (Choose one answer)
Answer: C
Explanation:
According to the OT Security 7.6 Architect study guide regarding IEC 62443 Security Levels :
* Security Level 4 (SL 4) Definition : This level provides " Protection against intentional violation using sophisticated means with extended resources, specific skills, and high motivation " .
* Real-World Application : The study guide specifically notes: " If you are facing a syndicate of cyber extortionists with extensive resources and capabilities, then you should strive for security level 4 " .
* Comparison to other levels :
* SL 1 : Protection against " casual or unintentional system violation " .
* SL 2 : Protection against " intentional violation using simple means with low resources " .
* SL 3 : Protection against " intentional violation using sophisticated means with moderate resources " .
NEW QUESTION # 62
......
If you want to pass your exam just one time, then we will be your best choice. NSEI_OTS_AR-7.6 questions and answers are edited by professional experts, and they have the professional knowledge in this field, therefore NSEI_OTS_AR-7.6 exam materials are high-quality. In addition, NSEI_OTS_AR-7.6 training materials contain most of the knowledge point for the exam, and you can have a good command of the exam dumps as well as improve your professional ability in the process of learning. You can also obtain the download link and password within ten minutes for NSEI_OTS_AR-7.6 Exam Dumps, so you can start your learning immediately.
Reliable NSEI_OTS_AR-7.6 Cram Materials: https://www.examtorrent.com/NSEI_OTS_AR-7.6-valid-vce-dumps.html