Don't you want to make a splendid achievement in your career? Certainly hope so. Then it is necessary to constantly improve yourself. Working in the Cisco industry, what should you do to improve yourself? In fact, it is a good method to improve yourself by taking Cisco certification exams and getting Cisco certificate. Cisco certificate is very important certificate, so more and more people choose to attend 300-110 Certification Exam.
| Section | Weight | Objectives |
|---|---|---|
| Topic 1: Mobility Design | 25% | - Guest mobility and BYOD design - Roaming optimization
|
| Topic 2: Wireless Infrastructure Design | 30% | - High-density wireless design
|
| Topic 3: Wireless Site Survey | 25% | - Pre-deployment survey and validation - Layer 1 site survey execution and analysis - Design requirements collection and constraint evaluation
|
| Topic 4: WLAN High Availability and Security Design | 20% | - Security architecture design
|
>> Unlimited 300-110 Exam Practice <<
The high quality of our 300-110 preparation materials is mainly reflected in the high pass rate, because we deeply know that the pass rate is the most important. As is well known to us, our passing rate has been high; 99% of people who used our 300-110 real test has passed their tests and get the certificates. I dare to make a bet that you will not be exceptional. Your test pass rate is going to reach more than 99% if you are willing to use our 300-110 Study Materials with a high quality. So it is necessary for you to know well about our 300-110 test prep.
NEW QUESTION # 49
An enterprise is using wireless as the main network connectivity for clients. To ensure wireless network availability, two standalone controllers are installed in the head office. APs are connected to the controllers using a round-robin approach to load balance the traffic. After a power cut, the wireless clients disconnect while roaming. An engineer tried eping from the controller but fails.
Which protocol needs to be allowed between the networks that the controllers are installed?
Answer: C
Explanation:
When eping (EoIP ping) fails between two Cisco Wireless LAN Controllers, it indicates that the data path of the mobility tunnel is blocked. In Cisco AireOS wireless networks, the mobility data path uses IP Protocol 97 (EtherIP -- Ethernet-over-IP encapsulation) for tunneling client traffic between the anchor and foreign controllers. This is distinct from the control path, which uses UDP port 16666. When the mobility data path (IP Protocol 97) is blocked by a firewall or ACL between the two controllers' networks, eping will fail because eping specifically tests the EoIP data encapsulation path. After a power cut, when clients disconnect and attempt to roam between APs on different controllers, the mobility tunnel must be operational for session continuity. If IP Protocol 97 is blocked, the mobility data plane cannot function, causing client disconnections during inter- controller roaming events. The other IP protocols listed (67, 77, 87) are not used for Cisco WLC mobility tunneling.
NEW QUESTION # 50
A consultant must design a WLAN for a large campus with high AP density, 50-100 clients per cell, 5 Mbps throughput per client minimum, 5 GHz and 2.4 GHz coverage at -67 dBm, and no 802.11b clients. Which two WLAN design approaches meet the requirements? (Choose two.)
Answer: A,C
Explanation:
Designing for 50-100 clients per cell with 5 Mbps minimum throughput and no 802.11b clients requires two critical optimizations. First, setting minimum mandatory data rates to 12-18 Mbps (Option A) removes legacy lower data rates from the AP ' s supported rate set. When 1, 2, 5.5, and 11 Mbps rates are disabled and 12 Mbps becomes the minimum mandatory rate, legacy 802.11b clients are excluded from the cell, airtime efficiency improves dramatically, and clients connecting at higher rates use less channel time per frame, increasing effective capacity. Second, Flexible Radio Assignment (FRA) for 2.4 GHz reduction (Option D) is critical in high-density environments. FRA allows the WLC to dynamically reassign some 2.4 GHz radios to 5 GHz operation or monitor mode, reducing 2.4 GHz cell size and interference while increasing 5 GHz capacity in the high-density area. Option C directly contradicts the no-802.11b requirement. Option B (6 SSIDs per AP) is a management consideration but does not directly address throughput. Option E (80-160 MHz channels) would consume available spectrum, reducing the number of usable non-overlapping channels and worsening co-channel interference at high density. Reference: WLSD Study Guide - High-Density WLAN Design, Minimum Data Rate Configuration, Flexible Radio Assignment (FRA).
NEW QUESTION # 51
What happens to an AP when a flex profile name is changed in a site tag?
Answer: C
Explanation:
On the Cisco Catalyst 9800 IOS XE WLC platform, the tag-based configuration model uses site tags to associate APs with specific profiles including a flex profile and an AP join profile. The site tag is a fundamental binding element - when any component of a site tag is modified, including renaming the flex profile associated with that tag, the WLC treats this as a material configuration change requiring the AP to re- evaluate its operational parameters. Specifically, the AP must disconnect its existing DTLS (Datagram Transport Layer Security) control plane tunnel to the WLC and re-establish it. This DTLS session disconnect and rejoin cycle is equivalent to a full AP rejoin: CAPWAP discovery, DTLS handshake, join request, configuration download, and image verification. Client service is interrupted on the affected AP during this process. Firmware updates (Option A) occur via a separate image download process. Temporary SSID disable (Option B) is not a defined behavior for profile name changes. Switching to a backup controller (Option C) requires AP failover conditions, not configuration changes. Understanding the disruptive nature of site tag modifications is essential for change management in production 9800 deployments. Reference: WLSD Study Guide - Catalyst 9800 Tag-Based Configuration Model, Site Tag Architecture, Flex Profile and AP Join Profile Management.
NEW QUESTION # 52
A customer has an existing wireless network with a Cisco 9800 WLC high availability cluster and Cisco 9120 APs. The customer asks an engineer to perform a post wireless survey that includes a list of any non-802.11 devices on the 5 GHz band. The engineer performs the survey using an
802.11a/b/g/n/ac/ax WLAN adapter but did not use a spectrum analyzer. Which approach meets the requirements?
Answer: B
Explanation:
Non-802.11 device detection on the 5 GHz band without a dedicated spectrum analyzer is possible through Cisco's CleanAir technology, which is embedded as an RF ASIC in many Cisco AP models including the 9120 series. CleanAir operates at the hardware layer -- below the
802.11 MAC -- enabling the APs to detect, classify, and report non-802.11 interference sources such as cordless phones, microwave ovens, video cameras, radar, and other unlicensed RF emitters in the 5 GHz spectrum. The WLC aggregates CleanAir reports from all APs and provides a consolidated interference device list accessible through the WLC's monitoring interface. Since the question specifies the 5 GHz band, the relevant 802.11 protocol for 5 GHz is 802.11a (and its successors 802.11n and 802.11ac). Exporting the list of 802.11a interferers from the WLC using the CleanAir RF ASIC correctly targets the 5 GHz band and identifies non-802.11 devices detected there.
NEW QUESTION # 53
An engineer is designing a wireless network for a facility located 3 km from an airport with a terminal Doppler weather radar installation. Which design consideration applies to the 5 GHz channel plan?
Answer: C
Explanation:
Dynamic Frequency Selection is a regulatory requirement that obligates a Wi-Fi device operating on affected 5 GHz channels to detect radar signals and vacate the channel within a defined interval, then remain off that channel for a non-occupancy period of 30 minutes. When this occurs, the AP moves to a new channel and associated clients must re-associate, producing a brief but real service interruption. Near an airport with terminal Doppler weather radar, the probability of these events is materially higher, so the engineer must weigh the additional channel capacity DFS provides against the risk of periodic disruption - often excluding the channels closest to the radar's operating frequency for latency-sensitive SSIDs while retaining the rest.
DFS channels cannot be locked against radar-triggered changes, since compliance is mandatory.
DFS does not confer higher transmit power, and radar detection applies to UNII-2 and UNII-2 Extended, not UNII-1.
NEW QUESTION # 54
......
For most people who have no much time to prepare the Cisco real exam, latest 300-110 exam questions will be your excellent partner to help you get high passing score in the valid test. Once you receive our 300-110 Dumps Torrent, it will just need one or two days to practice test questions and answers. If you finished it well, clearing exam will be easy.
300-110 Exam Questions Fee: https://www.dumpexams.com/300-110-real-answers.html