JN0-364최신덤프샘플문제 & JN0-364최신업데이트덤프공부

그 외, Fast2test JN0-364 시험 문제집 일부가 지금은 무료입니다: https://drive.google.com/open?id=1z1-CR-5k1XJZkVb4GvQnhEFyxhpa3lmm

인재도 많고 경쟁도 치열한 이 사회에서 IT업계 인재들은 인기가 아주 많습니다.하지만 팽팽한 경쟁률도 무시할 수 없습니다.많은 IT인재들도 어려운 인증시험을 패스하여 자기만의 자리를 지켜야만 합니다.우리 Fast2test에서는 마침 전문적으로 이러한 IT인사들에게 편리하게 시험을 패스할수 있도록 유용한 자료들을 제공하고 있습니다. Juniper 인증JN0-364인증은 아주 중요한 인증시험중의 하나입니다. Fast2test의Juniper 인증JN0-364로 시험을 한방에 정복하세요.

Juniper JN0-364 Exam Syllabus Topics:

SectionObjectives
Intermediate System to Intermediate System (IS-IS)- Demonstrate knowledge of how to configure, monitor, or troubleshoot IS-IS
  • 1. Interfaces and adjacencies
  • 2. Troubleshooting tools
  • 3. Routing policy application
- Identify the concepts, operation, or functionality of IS-IS
  • 1. Link-state database
  • 2. Type, length, values (TLVs)
  • 3. Levels and areas
  • 4. Adjacencies and neighbors
  • 5. Designated intermediate system (DIS)
  • 6. Metrics
  • 7. IS-IS protocol data units (PDUs)
Protocol-Independent Routing- Identify the concepts, operation, or functionality of various protocol-independent routing components
  • 1. Filter-based forwarding
  • 2. Martian addresses
  • 3. Static, aggregate, and generated routes
  • 4. Routing instances, including routing information base (RIB) (also known as routing table) group
  • 5. Load balancing
- Demonstrate knowledge of how to configure, monitor, or troubleshoot various protocol-independent routing components
  • 1. Filter-based forwarding
  • 2. Static, aggregate, and generated routes
  • 3. Load balancing
Layer 2 Bridging or VLANs- Identify the concepts, operation, or functionality of Layer 2 bridging for the Junos OS
  • 1. Frame processing
  • 2. Provider bridging (Q-in-Q tunneling)
  • 3. Service provider switching platforms
  • 4. Virtual Switches
  • 5. Bridging elements and terminology
- Identify the concepts, benefits, or functionality of VLANs
  • 1. Port modes
  • 2. Tagging
  • 3. Integrated Routing and Bridging (IRB)
- Demonstrate knowledge of how to configure, monitor, or troubleshoot Layer 2 bridging or VLANs
  • 1. VLANs
  • 2. IRB
  • 3. Interfaces and ports
  • 4. Provider bridging
Spanning Tree Protocols- Identify the concepts, operation, or functionality of STP
  • 1. MSTP
  • 2. STP
  • 3. RSTP
  • 4. VSTP
- Demonstrate knowledge of how to configure, monitor, or troubleshoot Spanning Tree Protocols
  • 1. MSTP
  • 2. STP
  • 3. RSTP
  • 4. VSTP
Multiprotocol Label Switching (MPLS)- Demonstrate knowledge of how to configure, monitor, or troubleshoot MPLS
  • 1. RSVP-signaled Label-Switched Paths (LSPs)
  • 2. Shortest path segment-routing LSPs
  • 3. LDP-signaled Label-Switched Paths (LSPs)
  • 4. MPLS forwarding
- Identify the concepts, operation, or functionality of MPLS CoS processing on Junos devices
  • 1. Segment routing with MPLS
  • 2. End-to-end packet flow and forwarding
  • 3. MPLS packet header
  • 4. Labels and the label information base
  • 5. LDP
  • 6. MPLS terminology
  • 7. MPLS and routing tables
  • 8. RSVP
IPv6- Demonstrate knowledge of how to configure, monitor, or troubleshoot IPv6
- Identify the concepts, operation, or functionality of IPv6
  • 1. Static routes
  • 2. IPv6 over IPv4 tunneling
  • 3. Dynamic routing - OSPFv3, IS-IS, BGP
Open Shortest Path First (OSPF)- Identify the concepts, operation, or functionality of OSPF
  • 1. Link-state database
  • 2. Router ID
  • 3. Designated router and backup designated router
  • 4. Adjacencies and neighbors
  • 5. OSPF packet types
  • 6. Link-state advertisement (LSA) packet type
  • 7. OSPF area and router types
- Demonstrate knowledge of how to configure, monitor, or troubleshoot OSPF
  • 1. Troubleshooting tools
  • 2. Routing policy application
  • 3. Interfaces and neighbor
Border Gateway Protocol (BGP)- Identify the concepts, operation, or functionality of BGP
  • 1. BGP message types
  • 2. BGP basic operation
  • 3. IBGP and EBGP functionality and interaction
  • 4. BGP route reflection and confederations
  • 5. Route selection process
  • 6. Attributes
- Demonstrate knowledge of how to configure, monitor, or troubleshoot BGP
  • 1. Peers and peer groups
  • 2. Troubleshooting tools
  • 3. Routing policy application

>> JN0-364최신 덤프샘플문제 <<

JN0-364최신 업데이트 덤프공부 - JN0-364최신버전 공부자료

Fast2test Juniper JN0-364덤프의 질문들과 답변들은 100%의 지식 요점과 적어도 98%의 시험 문제들을 커버하는,수년동안 가장 최근의Juniper JN0-364시험 요점들을 컨설팅 해 온 시니어 프로 IT 전문가들의 그룹에 의해 구축 됩니다. Fast2test의 IT전문가들이 자신만의 경험과 끊임없는 노력으로 최고의Juniper JN0-364학습자료를 작성해 여러분들이Juniper JN0-364시험에서 패스하도록 도와드립니다.

최신 JNCIS-SP JN0-364 무료샘플문제 (Q29-Q34):

질문 # 29
Click the Exhibit button.

You have configured an MPLS LSP to 192.168.100.3. However, the LSP is in the down state.
Referring to the exhibit, which two actions would solve this problem? (Choose two.)

정답：A,D

설명：
The LSP is using CSPF and the output indicates CSPF cannot build a path because the traffic- engineering database is not available. Enabling OSPF traffic-engineering allows the router to populate the TE database used by CSPF. Alternatively, disabling CSPF forces the LSP to be computed using the normal IGP shortest path, which removes the dependency on the TE database and allows the LSP to come up.


질문 # 30
An OSPF router does not have a router ID configured.
In this scenario, which statement is correct about the router ID?

정답：A

설명：
The router identifier is used by BGP and OSPF to identify the routing device from which a packet originated. The router identifier usually is the IP address of the local routing device. If you do not configure a router identifier, the IP address of the first interface to come online is used. This is usually the loopback interface. Otherwise, the first hardware interface with an IP address is used In OSPF, if a router ID is not manually configured, Junos OS will automatically select the router ID based on the highest IP address of any of the router's loopback interfaces. If no loopback interface exists, the highest IP address of any active interface will be used. Therefore, answer C is correct.


질문 # 31
Which two statements about the BGP path selection process are correct? (Choose two.)

정답：C,D


질문 # 32
You configured an aggregated Ethernet bundle between R1 and R2. Unfortunately, the bundle is not working correctly.
Referring to the exhibit, which configuration change will solve this issue?

정답：A


질문 # 33
Which IS-IS adjacency state indicates that hello packets have been exchanged but the adjacency is not yet fully established?

정답：D

설명：
In theIS-IS (Intermediate System to Intermediate System)protocol, the process of forming an adjacency between two neighbors follows a specific sequence of states. While OSPF uses states like "Init," "Two-Way," and "Full," IS-IS uses a slightly different nomenclature within its state machine.
According to Juniper Networks technical documentation, when a router first sends anIS-IS Hello (IIH) PDU and receives one back from a neighbor, but has not yet confirmed that the neighbor "sees" it back, the adjacency enters theInitializingstate. Specifically, on a point-to-point link, the state transitions fromDownto Initializingas soon as the first PDU is received. On a broadcast network (like Ethernet), the Initializing state indicates that the local router has received a Hello PDU from the neighbor, but the local router's own System ID is not yet listed in the neighbor's list of "seen" neighbors (the neighbor's Hello PDU does not yet contain the local router's MAC address).
The adjacency only moves to theUpstate (Option C) once bi-directional communication is confirmed- meaning both routers have seen each other's System IDs in the incoming Hello PDUs.
Why other options are incorrect:
* Loading (Option A):This is an OSPF state, not an IS-IS state. In IS-IS, database synchronization happens after the adjacency is Up.
* Two-Way (Option D):While functionally similar to the state IS-IS is achieving, "Two-Way" is the specific terminology for OSPF. In IS-IS, the intermediate step between knowing a neighbor exists and having a fully functional adjacency is strictly calledInitializing.


질문 # 34
......

Fast2test는 여러분이 원하는 최신 최고버전의 Juniper 인증JN0-364덤프를 제공합니다. Juniper 인증JN0-364덤프는 IT업계전문가들이 끊임없는 노력과 지금까지의 경험으로 연구하여 만들어낸 제일 정확한 시험문제와 답들로 만들어졌습니다. Fast2test의 문제집으로 여러분은 충분히 안전이 시험을 패스하실 수 있습니다. 우리 Fast2test 의 문제집들은 모두 100%합격율을 자랑하며 Fast2test의 제품을 구매하였다면 Juniper 인증JN0-364시험패스와 자격증 취득은 근심하지 않으셔도 됩니다. 여러분은 IT업계에서 또 한층 업그레이드 될것입니다.

JN0-364최신 업데이트 덤프공부: https://kr.fast2test.com/JN0-364-premium-file.html

Fast2test JN0-364 최신 PDF 버전 시험 문제집을 무료로 Google Drive에서 다운로드하세요: https://drive.google.com/open?id=1z1-CR-5k1XJZkVb4GvQnhEFyxhpa3lmm