P.S. Free & New NSE4_FGT_AD-7.6 dumps are available on Google Drive shared by Actual4test: https://drive.google.com/open?id=1eoFcoX-MKKZmZxAWilB1kYMQem8ToE3_
Thousands of Fortinet NSE 4 - FortiOS 7.6 Administrator (NSE4_FGT_AD-7.6) exam applicants are satisfied with our NSE4_FGT_AD-7.6 practice test material because it is according to the latest Fortinet NSE 4 - FortiOS 7.6 Administrator (NSE4_FGT_AD-7.6) exam syllabus and we also offer up to 1 year of free Fortinet Dumps updates. Visitors of Actual4test can check the NSE4_FGT_AD-7.6 product by trying a free demo. Buy the NSE4_FGT_AD-7.6 test preparation material now and start your journey towards success in the NSE4_FGT_AD-7.6 examination.
| Section | Weight | Objectives |
|---|---|---|
| Firewall Policies and NAT | 25% | - Virtual IP (VIP) and DNAT - NAT and PAT configuration - Policy troubleshooting - Policy concepts and types - IPv4 and IPv6 policies |
| High Availability (HA) | 10% | - Heartbeat and synchronization - HA modes and configuration - Failover behavior and troubleshooting |
| FortiGate Fundamentals | 15% | - Initial configuration and setup - Dashboard and monitoring - FortiOS operation modes (NAT/Transparent) - Security Fabric overview - FortiGate models and hardware architecture |
| Network Security | 20% | - Antivirus scanning - Intrusion prevention system (IPS) - DNS filtering - Packet flow and inspection - Application control - URL filtering |
| VPN Configuration | 20% | - VPN concentrator - SSL-VPN fundamentals and configuration - IPSec VPN site-to-site - VPN troubleshooting |
| SD-WAN | 10% | - SD-WAN configuration using security profiles - Performance SLA monitoring - SD-WAN components and benefits |
>> NSE4_FGT_AD-7.6 Exam Tests <<
The simulation of the actual Fortinet NSE4_FGT_AD-7.6 test helps you feel the real NSE4_FGT_AD-7.6 exam scenario, so you don't face anxiety while giving the final examination. You can even access your last test results, which help to realize your mistakes and try to avoid them while taking the Fortinet NSE4_FGT_AD-7.6 Certification test.
NEW QUESTION # 67
You have created a web filter profile named restrictmedia-profile with a daily category usage quota.
When you are adding the profile to the firewall policy, the restrict_media-profile is not listed in the available web profile drop down.
What could be the reason?
Answer: C
Explanation:
In FortiOS 7.6, web filter profiles are inspection-mode dependent. Certain advanced web filtering features-such as daily category usage quota-are only supported when the firewall policy is operating in proxy-based inspection mode.
Why the profile is not visible
The profile restrictmedia-profile includes a daily category usage quota.
Daily quotas are a proxy-based web filtering feature.
If the firewall policy is configured with:
Inspection mode: Flow-based
Then FortiGate will not display proxy-only web filter profiles in the Web Filter drop-down list.
FortiGate automatically filters the available profiles based on feature compatibility with the policy's inspection mode.
This behavior is explicitly documented in the FortiOS 7.6 Web Filtering and Inspection Mode Compatibility sections.
Why the other options are incorrect
A . Already referenced in another firewall policy
Web filter profiles can be reused across multiple policies. This does not hide them.
B . Firewall policy is in no-inspection mode instead of deep-inspection SSL inspection depth affects HTTPS visibility, not whether a web filter profile appears in the drop-down list.
C). Naming convention restriction
FortiOS does not restrict profile selection based on naming conventions.
NEW QUESTION # 68
The HTTP inspection process in web filtering follows a specific order when multiple features are enabled in the web filter profile.
Which order must FortiGate use when the web filter profile has features such as safe search enabled?
Answer: C
Explanation:
Remember that the web filtering profile has several features. So, if you have enabled many of them, the inspection order flows as follows:
1. The local static URL filter
2. FortiGuard category filtering (to determine a rating)
3. Advanced filters (such as safe search or removing Active X components).
NEW QUESTION # 69
Refer to the exhibit.
Review the intrusion prevention system (IPS) profile signature settings shown in the exhibit.
What do you conclude when adding the FTP.Login.Failed signature to the IPS sensor profile?
Answer: D
Explanation:
Select Block to silently drop traffic matching any of the signatures included in the entry.
So, while the default action would be 'Pass' for this signature the administrator is specifically overriding that to set the Block action. To use the default action the setting would have to be
'Default'.
NEW QUESTION # 70
Refer to the exhibits. The exhibits show a diagram of a FortiGate device connected to the network, and the firewall configuration.
An administrator created a Deny policy with default settings to deny Webserver access for Remote-User2.
The policy should work such that Remote-User1 must be able to access the Webserver while preventing Remote-User2 from accessing the Webserver.
Which additional configuration can the administrator add to a deny firewall policy, beyond the default behavior, to block Remote-User2 from accessing the Webserver?
Answer: D
Explanation:
To block Remote-User2's access to the Webserver, the deny policy must explicitly specify the Webserver as the destination address; otherwise, it denies traffic to all destinations, which is not the desired behavior.
NEW QUESTION # 71
You are onboarding an agentless, secure web gateway (SWG) endpoint for secure internet access (SIA). What will happen to the user ' s nonweb traffic? (Choose one answer)
Answer: B
Explanation:
"In this use case, FortiSASE acts as an SWG and distributes a proxy auto-configuration (PAC) file to end users, enabling the FortiSASE SWG service as an explicit web proxy. SWG deployment secures only web traffic protocols, such as HTTP and HTTPS."
"All other nonweb traffic bypasses FortiSASE and is forwarded directly to the internet." Technical Deep Dive:
The correct answer is A .
In agentless SWG-based SIA , FortiSASE is operating as an explicit web proxy using a PAC file . That model captures only web protocols , specifically HTTP and HTTPS . It does not create a full tunnel for the endpoint like agent-based FortiClient deployment does.
So the design implication is simple: nonweb traffic does not traverse FortiSASE in this onboarding model.
It goes directly to the internet from the endpoint.
Why the other options are wrong:
* B is wrong because this is not split-tunnel VPN behavior.
* C is wrong because FWaaS does not automatically capture nonweb traffic in the agentless SWG model.
* D is wrong because SWG does not redirect nonweb traffic to FortiExtender.
This is an important deployment distinction:
* Agent-based SIA can steer broader endpoint traffic through FortiSASE.
* Agentless SWG SIA secures only browser-based web traffic.
NEW QUESTION # 72
......
Are you worried about you poor life now and again? Are you desired to gain a decent job in the near future? Do you dream of a better life? Do you want to own better treatment in the field? If your answer is yes, please prepare for the NSE4_FGT_AD-7.6 exam. It is known to us that preparing for the exam carefully and getting the related certification are very important for all people to achieve their dreams in the near future. It is a generally accepted fact that the NSE4_FGT_AD-7.6 Exam has attracted more and more attention and become widely acceptable in the past years.
NSE4_FGT_AD-7.6 Latest Test Camp: https://www.actual4test.com/NSE4_FGT_AD-7.6_examcollection.html
BONUS!!! Download part of Actual4test NSE4_FGT_AD-7.6 dumps for free: https://drive.google.com/open?id=1eoFcoX-MKKZmZxAWilB1kYMQem8ToE3_