P.S. Free 2026 Juniper JN0-364 dumps are available on Google Drive shared by VCE4Plus: https://drive.google.com/open?id=1vpQSgqxvgpzh9dM3o0xfeXGO8ORxlpuN
The JN0-364 certification is the best proof of your ability. However, it's not easy for those work officers who has less free time to prepare such an JN0-364 exam, and people always feel fear of the unknown thing and cannot handle themselves with a sudden change. However, our JN0-364 Exam Questions can stand by your side. And we are determined to devote ourselves to serving you with the superior JN0-364 study materials. You can have a try on the free demo of our JN0-364 exam questions, you can understand in detail and make a choice.
| Section | Objectives |
|---|---|
| Topic 1: Multiprotocol Label Switching (MPLS) | - Demonstrate knowledge of how to configure, monitor, or troubleshoot MPLS
|
| Topic 2: Open Shortest Path First (OSPF) | - Demonstrate knowledge of how to configure, monitor, or troubleshoot OSPF
|
| Topic 3: Spanning Tree Protocols | - Demonstrate knowledge of how to configure, monitor, or troubleshoot Spanning Tree Protocols
|
| Topic 4: Border Gateway Protocol (BGP) | - Identify the concepts, operation, or functionality of BGP
|
| Topic 5: IPv6 | - Identify the concepts, operation, or functionality of IPv6
|
| Topic 6: Layer 2 Bridging or VLANs | - Identify the concepts, operation, or functionality of Layer 2 bridging for the Junos OS
|
| Topic 7: Intermediate System to Intermediate System (IS-IS) | - Identify the concepts, operation, or functionality of IS-IS
|
| Topic 8: Protocol-Independent Routing | - Identify the concepts, operation, or functionality of various protocol-independent routing components
|
>> JN0-364 Latest Exam Dumps <<
Are you planning to take the Service Provider Routing and Switching, Specialist (JNCIS-SP) (JN0-364) certification test and don't know where to download real and updated JN0-364 exam questions? VCE4Plus is offering Juniper JN0-364 Dumps questions, especially for applicants who want to prepare quickly for the Service Provider Routing and Switching, Specialist (JNCIS-SP) test. Candidates who don't study from real dumps questions fail to clear the Service Provider Routing and Switching, Specialist (JNCIS-SP) examination in a short time.
NEW QUESTION # 95
Exhibit:
Referring to the exhibit, which two statements are correct? (Choose two.)
Answer: B,C
Explanation:
In the provided exhibit, the output of the command show spanning-tree interface for switch1 reveals critical details about the Spanning Tree Protocol (STP) operational state.
The first correct statement is thatthe switch1 device is the root bridge(Option B). This is determined by comparing the "Port ID" column with the "Designated port ID" column, as well as checking the "Designated bridge ID". In the exhibit, for every interface listed (from ge-0/0/6.0 to ge-0/0/13.0), the Port ID and the Designated port ID are identical. Furthermore, every port is in the "FWD" (Forwarding) state with the
"DESG" (Designated) role. In a Spanning Tree topology, the root bridge is the only device where all active participating interfaces serve as designated ports, as it has no need for a "Root" port role (which points toward a root bridge).
The second correct statement is thatthe bridge priority for switch1 is 32k(Option D). Looking at the
"Designated bridge ID" column, we see the value 32768.0019e2552481. In Junos and general networking standards, the Bridge ID is composed of a bridge priority and the device's MAC address. The default priority for most Spanning Tree variants (STP, RSTP, MSTP) is 32,768, which is commonly referred to in shorthand as "32k".
Regarding the incorrect options:
* Option A:There is no evidence of VSTP (VLAN Spanning Tree Protocol); the output shows "instance
0," which is typical for IEEE standard RSTP or STP.
* Option C:The Port IDs for ge-0/0/8, ge-0/0/9, and ge-0/0/11 all start with "32" (e.g., 32:521), whereas the default port priority is typically 128 (as seen in ge-0/0/6.0 with 128:519). This indicates that the interface priorities for these specific ports have been manually tuned to a non-default value.
NEW QUESTION # 96
You are deploying an MC-LAG connection at the edge of your network to a new customer. This solution must ensure that traffic uses all available links when forwarding traffic between the two networks.
In this scenario, which two statements are correct? (Choose two.)
Answer: A,C
NEW QUESTION # 97
You are asked to configure a new network environment that will be based on IPv6 and use OSPF. In this scenario, which two statements correctly identify configuration task considerations? (Choose two.)
Answer: A,C
Explanation:
When transitioning to an IPv6 environment usingOSPFv3(the version of OSPF designed for IPv6), there are significant architectural differences compared to OSPFv2 (IPv4). According to Juniper Networks technical documentation, OSPFv3 was redesigned to be more protocol-agnostic.
Router ID (Option C):
Despite OSPFv3 routing IPv6 (which uses 128-bit addresses), the OSPFRouter IDremains a32-bit value formatted like an IPv4 address (e.g., 1.1.1.1). This is a common point of confusion. In a pure IPv6 environment where no IPv4 addresses are configured on any interfaces, a Juniper router cannot automatically derive a Router ID. Therefore, the administrator must manually configure a 32-bit Router ID under [edit routing-options] for the OSPFv3 process to initialize.
Interface Configuration (Option D):
OSPFv3 runs directly over the IPv6 link-local scope. Unlike OSPFv2, it does not require an IPv4 address to function. Therefore, interfaces areonly required to be configured with family inet6(Option D). You do not need "dual-stack" (both IPv4 and IPv6) functionality just to run OSPFv3. The protocol uses the link-local address (fe80::/10) of the interface for neighbor adjacencies and as the next hop for routing updates. This separation allows OSPFv3 to carry multiple "address families" (both IPv4 and IPv6 unicast) if needed, but the base requirement for an IPv6-only network is simply the family inet6 configuration.
NEW QUESTION # 98
Which two statements regarding GRE and IP-IP tunnels are correct? (Choose two.)
Answer: B,D
Explanation:
In Juniper Networks Junos OS,Generic Routing Encapsulation (GRE)andIP-in-IP (IP-IP)are common tunneling mechanisms used to transport packets across a network by encapsulating them within another protocol. Understanding the header structure and the limitations of these protocols is essential for proper MTU (Maximum Transmission Unit) management and security design.
Overhead (Option A):
Both GRE and IP-IP tunnels operate by adding an additional IP header to the original packet. An IP-IP tunnel (Protocol 4) adds a20-byteIPv4 header. A GRE tunnel (Protocol 47) adds the same20-bytedelivery IP header plus a minimum4-byteGRE header (totaling 24 bytes, which can increase if keys or sequencing are used).
Because these headers are added to the payload, the total size of the packet increases. This "overhead" means that if the original packet was already at the MTU limit (e.g., 1500 bytes), the encapsulated packet will exceed it, potentially leading to fragmentation or the need to adjust theTCP MSS (Maximum Segment Size).
Encryption (Option D):
Crucially, according to Juniper Service Provider documentation, neither GRE nor IP-IP provides native encryptionor data confidentiality. They are encapsulation protocols, not security protocols. The payload remains in cleartext and is visible to any device along the path. If security and encryption are required for data traversing these tunnels, they must be combined withIPsec (IP Security). While GRE is often used as the
"carrier" for IPsec (to allow multicast or dynamic routing protocols which IPsec alone does not support), the GRE protocol itself remains an unencrypted delivery mechanism. Therefore, statements A and D accurately describe the architectural behavior of these tunnel types.
NEW QUESTION # 99
Which BGP attribute is optional, transitive, and is passed unchanged to other BGP peers if not recognized?
Answer: D
Explanation:
The Community attribute is an optional transitive BGP attribute. Optional transitive attributes are propagated to other BGP peers even if a router does not recognize them. The Community attribute is commonly used to tag routes so that routing policies can apply specific handling to those routes as they propagate through the network.
NEW QUESTION # 100
......
As is known to us, different people different understanding of learning, and also use different methods in different periods, and different learning activities suit different people, at different times of the day. Our JN0-364 test questions are carefully designed by a lot of experts and professors in order to meet the needs of all customers. We can promise that our JN0-364 exam question will be suitable for all people, including student, housewife, and worker and so on. No matter who you are, you must find that our JN0-364 Guide Torrent will help you a lot. If you choice our product and take it seriously consideration, we can make sure it will be very suitable for you to help you pass your exam and get the JN0-364 certification successfully. You will find Our JN0-364 guide torrent is the best choice for you.
Valid Dumps JN0-364 Questions: https://www.vce4plus.com/Juniper/JN0-364-valid-vce-dumps.html
BONUS!!! Download part of VCE4Plus JN0-364 dumps for free: https://drive.google.com/open?id=1vpQSgqxvgpzh9dM3o0xfeXGO8ORxlpuN