We have a large number of regular customers exceedingly trust our Fortinet NSE I - OT Security 7.6 Architect practice materials for their precise content about the exam. You may previously have thought preparing for the NSEI_OTS_AR-7.6 practice exam will be full of agony, actually, you can abandon the time-consuming thought from now on. Our practice materials can be understood with precise content for your information, which will remedy your previous faults and wrong thinking of knowledge needed in this exam. As a result, many customers get manifest improvement and lighten their load by using our NSEI_OTS_AR-7.6 practice materials. Up to now, more than 98 percent of buyers of our practice materials have passed it successfully. NSEI_OTS_AR-7.6 practice materials can be classified into three versions: the pdf, the software and the app version. So we give emphasis on your goals, and higher quality of our NSEI_OTS_AR-7.6 practice materials.
| Section | Weight | Objectives |
|---|---|---|
| Network Security | 25% | - Deep inspection for industrial protocols (Modbus, DNP3, OPC) - Virtual patching for legacy OT systems - Security automation and threat response |
| Network Access Control | 25% | - OT Ethernet and industrial communication models - Purdue Model and secure network segmentation - Authentication and access policies for OT devices |
| Monitoring and Risk Assessment | 25% | - Event handling and logging with FortiAnalyzer 7.6 - Threat detection using FortiSIEM 7.4 - OT-focused risk assessment and management |
| Asset Management | 25% | - Fortinet Security Fabric for OT environments - OT security standards and compliance (IEC 62443, NIST) - Device detection and inventory using FortiGate & FortiNAC |
>> NSEI_OTS_AR-7.6 Study Guides <<
If you have the certification for the exam, your competitive force and wage will be improved in your company. NSEI_OTS_AR-7.6 exam cram can help you pass the exam and obtain the corresponding certification successfully. We have a professional team to collect and research the latest information for the exam, and you can know the latest information if you choose us. We offer you free update for 365 days for NSEI_OTS_AR-7.6 Exam Dumps, and our system will send you he latest version automatically. You can receive the downloading link and password for NSEI_OTS_AR-7.6 exam dumps within ten minutes after payment.
NEW QUESTION # 50
Refer to the exhibit.
The configuration of firewall policies is shown.
To improve the security of your OT network, you have configured authentication in the firewall policies as shown in the exhibit, with CLI parameters set to their default settings. However, when you test HTTPS access from the LAN subnet to PLC-1, it is successful without any authentication prompt.
What is the reason?
Answer: C
Explanation:
The correct answer is A . Policy ID 8 contains the Supervisors user group, so authentication is required for traffic matching that policy. However, policy ID 9 permits traffic to PLC-1 without a user or user-group authentication requirement. Fortinet explains that when an authentication policy is followed by a fall-through policy that does not require authentication , traffic can match the fall-through policy and proceed without generating a login prompt. This is particularly relevant because the default CLI setting is auth-on-demand implicitly. Under the default implicitly behavior, FortiGate does not trigger active authentication when a matching unauthenticated fall-through policy exists. Setting auth-on-demand always, or requiring authentication on all potentially matching policies, changes that behavior. Therefore, HTTPS succeeds without prompting because authentication was not configured on firewall policy ID 9 .
NEW QUESTION # 51
Refer to the exhibit.
A partial OT network is shown. You have encountered many disconnections in the links and want to improve the availability of this network. Which action can you perform? (Choose one answer)
Answer: B
Explanation:
The correct answer is C. You can implement parallel redundancy protocol . The study guide explains that media redundancy involves creating a backup path that can be used when part of the network fails and specifically states that "Parallel Redundancy Protocol (PRP) can be used for a star topology." Since the problem described is many disconnections in the links , the issue is link availability, which is a media redundancy problem rather than a firewall virtualization or policy separation problem. PRP is designed to provide a backup communication path with low recovery time when links fail.
The other options do not fit this scenario as well. HA clusters are described in the guide as a solution for network node redundancy , where a backup firewall or switch takes over when the primary device fails. SD- WAN is recommended for remote site access across multiple WAN links, not for the local floor links shown in this topology. VDOMs provide logical segmentation, not link redundancy or higher link availability.
Because the question is specifically about repeated link disconnections , the best action is to implement PRP .
NEW QUESTION # 52
You want to improve access control for your large OT network using passive authentication. What must you configure on FortiGate? (Choose one answer)
Answer: B
Explanation:
The correct answer is A. Fortinet Single-Sign On (FSSO) . The study guide states under Active and Passive Authentication that for passive authentication, "User does not receive a login prompt from FortiGate" ,
"Credentials are determined automatically" , and specifically "FSSO, RSSO, and NTLM can be used." It then explains that passive authentication occurs with the single sign-on method and explicitly identifies Fortinet SSO (FSSO) as one of those methods.
The guide also says: "For passive authentication, you can implement FSSO. FSSO allows users who have already authenticated on the network through another system to be transparently identified. After initial login to any system on the network, users can access allowed resources without being prompted for credentials." That is exactly what the question asks for: improving access control in a large OT network using passive authentication .
The other options do not match passive authentication. Local users are part of local authentication, two- factor authentication adds an extra security factor but still uses active authentication, and FortiAuthenticator as a remote server supports centralized authentication for mid-to-large networks, but by itself it is not the specific passive-authentication method being asked here. The study guide is explicit that the FortiGate configuration for passive authentication is FSSO .
NEW QUESTION # 53
What is the next step if FortiGate cannot detect a device locally? (Choose one answer)
Answer: D
Explanation:
The correct answer is A. FortiGate queries FortiGuard servers . The study guide explains the device detection process very clearly: "First, FortiGate attempts to detect the devices based on the information in the local device database (CIDB). If FortiGate cannot detect the devices locally, it queries the FortiGuard servers by sending data about the unknown devices to the FortiGuard servers. In response, the FortiGuard servers provide additional information about those devices." This directly answers the question and shows that querying FortiGuard is the next step after local detection fails.
Option D is incorrect because the guide says FortiGate checks the local device database (CIDB) first, before this next step. Option B refers more to FortiNAC-style profiling logic, not FortiGate's OT device detection flow. Option C is also incorrect because service connectors are not described here as the immediate follow-up step for unknown local device detection. The study guide specifically identifies FortiGuard servers as the next destination for device identification assistance.
NEW QUESTION # 54
Refer to the exhibits.
A partial view of the Playbook Monitor page and the corresponding playbook configuration are shown.
Based on the monitor page and the configuration of the playbook, what has triggered the Run_Report task?
(Choose one answer)
Answer: D
Explanation:
Based on the provided exhibits from the FortiAnalyzer playbook engine:
* Playbook Trigger Condition : The Partial Playbook configuration exhibit shows that the playbook is set to trigger based on a condition where the Basic Handler Name is Equal To IPS_Attack_Handling.
* Event vs. Log : In FortiAnalyzer, the field Basic Handler Name is a property of an Event record, indicating the specific Event Handler that generated it. A playbook configured with this condition is triggered by an Event , not directly by a raw log.
* Playbook Execution Flow : The Partial Playbook Monitor view shows the execution sequence:
* Event_Trigger (Starter) : This is the entry point of the playbook, which matches the condition defined in the configuration.
* IPS_Attack_Incident : The first task executed after the trigger.
* Run_Report : The task in question, which is executed as part of the automated workflow initiated by the starter.
* Conclusion : Since the playbook ' s " Starter " is defined by the IPS_Attack_Handling handler name, an event produced by that handler is the root trigger for the entire playbook execution, including the Run_Report task.
Therefore, the Run_Report task was triggered (as part of the playbook) by an IPS_Attack_Handling event .
NEW QUESTION # 55
......
As is known to us, people who want to take the NSEI_OTS_AR-7.6 exam include different ages, different fields and so on. It is very important for company to design the NSEI_OTS_AR-7.6 exam prep suitable for all people. However, our company has achieved the goal. We can promise that the NSEI_OTS_AR-7.6 test questions from our company will be suitable all people. There are many functions about our study materials beyond your imagination. You can purchase our NSEI_OTS_AR-7.6 reference guide according to your own tastes. We believe that the understanding of our study materials will be very easy for you. We hope that you can choose the NSEI_OTS_AR-7.6 test questions from our company, because our products know you better.
NSEI_OTS_AR-7.6 Test Dates: https://www.pass4surecert.com/Fortinet/NSEI_OTS_AR-7.6-practice-exam-dumps.html