PracticeVCE Fortinet NSEI_OTS_AR-7.6 Practice Test give you the opportunity to practice for the Fortinet NSEI_OTS_AR-7.6 new exam questions. By using Fortinet Practice Test, you can get the ideal possibility to know the actual Fortinet NSE I - OT Security 7.6 Architect exam, as they follow the same interface as the real exam. This way, you can become more confident and comfortable while taking the actual exam.
| Section | Objectives |
|---|---|
| Asset management | - Implement device detection on FortiGate and FortiNAC - Fortinet Security Fabric for an OT network - Explain OT standard and Fortinet compliance |
| Network access control | - Explain OT Ethernet concepts - Configure network segmentation schemas - Configure network access authentication |
| Network security | - Configure virtual patching - Configure automation - Configure security inspections for industrial protocols |
| Monitoring and risk assessment | - Analyze security reports from FortiAnalyzer - Perform risk assessment and management - Create FortiAnalyzer event handlers |
>> Reliable NSEI_OTS_AR-7.6 Exam Cram <<
Our company has dedicated ourselves to develop the NSEI_OTS_AR-7.6 study materials for all candidates to pass the exam easier, also has made great achievement after more than ten years' development. As the certification has been of great value, a right NSEI_OTS_AR-7.6 study material can be your strong forward momentum to help you pass the exam like a hot knife through butter. On the contrary, it might be time-consuming and tired to prepare for the NSEI_OTS_AR-7.6 Exam without a specialist study material. So it's would be the best decision to choose our NSEI_OTS_AR-7.6 study materials as your learning partner.
NEW QUESTION # 11
Refer to the exhibit.
A partial Application Sensor profile is shown. When you apply this profile in a firewall policy, which two statements are correct? (Choose two answers)
Answer: A,D
Explanation:
The correct answers are A and C .
Option C is correct because the profile clearly contains the Operational Technology category and specific OT application signatures such as Modbus and IEC.60870.5.104 . The study guide says "You can use application control signatures to detect OT protocols" and "You can filter to a specific OT protocol." That means OT application signatures are active in this sensor profile.
Option A is correct because the guide explains that application control works at different levels: "Detection of protocol (one detection per session)" and "Message level (one detection per protocol message)." It also says you can use application signatures for "granular message type identification." In the exhibit, IEC.
60870.5.104.Control.Functions is explicitly configured, which is a granular IEC message/control-level signature rather than only a protocol-level match. That means logging and control can occur at the IEC command level.
Option B is not correct because the profile shows Modbus configured at the parent protocol level as Monitor
, while the guide states that the "parent signature takes precedence over the child signature." Since protocol-level detection is one detection per session , that does not mean FortiGate will necessarily log each Modbus command individually.
Option D is incorrect because even though the broader Operational Technology category is set to block, the profile includes specific application and filter overrides for Modbus and IEC 104 behavior. So the resulting effect is not simply that all OT protocols are blocked .
NEW QUESTION # 12
Refer to the exhibit.
A partial OT network is shown. You want to configure an automated alert sent by FortiAnalyzer when an attack occurs on a FortiGate device. Which two configurations must you implement? (Choose two answers)
Answer: C,D
Explanation:
The correct answers are A and D . The study guide provides a direct use case called Attack Detection and Automated Alert . It states: "A downstream FortiGate detects an attack and sends logs to FortiAnalyzer. FortiAnalyzer parses the logs and notifies the root FortiGate. The root FortiGate triggers the action, which in this case, is a notification to the administrator." The same slide also explicitly shows "Stitches configured on root FortiGate." This confirms that to send the automated alert, you must configure the automation stitch on the root FortiGate .
The second required configuration is an event handler on FortiAnalyzer . The guide explains that "Event handlers generate events" and that "FortiAnalyzer uses event handlers to filter all incoming logs. If logs match the conditions configured in an event handler, FortiAnalyzer generates an event." Since FortiAnalyzer must detect the attack from the received logs before notifying the root FortiGate, an event handler is required on FortiAnalyzer.
Option B is incorrect because the study guide does not identify a LOCALHOST task as the required configuration for this attack-alert flow. Option C is also incorrect because the question asks what must be configured to enable the automated alert workflow . An IPS profile may detect some attacks, but the required automation path in the study guide is specifically event handler on FortiAnalyzer + stitch on the root FortiGate .
NEW QUESTION # 13
You want to automate some tasks in your OT network. Which three configurations are directly available in a new basic event handler on FortiAnalyzer? (Choose three answers)
Answer: A,D,E
Explanation:
According to the OT Security 7.6 Architect study guide regarding FortiAnalyzer Event Management :
* Notification Options : When configuring a new event handler, FortiAnalyzer provides several built-in notification methods to alert administrators when specific log criteria are met. The most common and direct method is Send alert email (Option A).
* Incident Management : To streamline the SOC workflow, an event handler can be configured to Automatically create an incident (Option D) based on the triggered event. This moves the event into the Incident Manager for further analysis.
* Security Fabric Integration : In the 7.6 architecture, event handlers can directly trigger an Automation stitch (Option E). This allows the FortiAnalyzer to notify the root FortiGate to take action (like running a CLI script or changing a policy) across the Security Fabric.
* Exclusions : Create a report (Option B) is typically a task performed by a Playbook or a scheduled report job, not a direct setting inside the basic event handler configuration. Quarantine an attacker (Option C) is an action that results from an automation stitch or playbook, but it is not a direct configuration toggle within the event handler itself.
NEW QUESTION # 14
Refer to the exhibits.
A partial view of the Playbook Monitor page and the corresponding playbook configuration are shown.
Based on the monitor page and the configuration of the playbook, what has triggered the Run_Report task?
(Choose one answer)
Answer: D
Explanation:
Based on the provided exhibits from the FortiAnalyzer playbook engine:
* Playbook Trigger Condition : The Partial Playbook configuration exhibit shows that the playbook is set to trigger based on a condition where the Basic Handler Name is Equal To IPS_Attack_Handling.
* Event vs. Log : In FortiAnalyzer, the field Basic Handler Name is a property of an Event record, indicating the specific Event Handler that generated it. A playbook configured with this condition is triggered by an Event , not directly by a raw log.
* Playbook Execution Flow : The Partial Playbook Monitor view shows the execution sequence:
* Event_Trigger (Starter) : This is the entry point of the playbook, which matches the condition defined in the configuration.
* IPS_Attack_Incident : The first task executed after the trigger.
* Run_Report : The task in question, which is executed as part of the automated workflow initiated by the starter.
* Conclusion : Since the playbook ' s " Starter " is defined by the IPS_Attack_Handling handler name, an event produced by that handler is the root trigger for the entire playbook execution, including the Run_Report task.
Therefore, the Run_Report task was triggered (as part of the playbook) by an IPS_Attack_Handling event .
NEW QUESTION # 15
For the installation of your first FortiGate device, you want to minimize the impact in your OT network.
Therefore, you deploy it initially as an offline IDS. Which two statements about this deployment are correct?
(Choose two answers)
Answer: B,D
Explanation:
Deploying a FortiGate in offline IDS (also known as one-arm sniffer mode) is a common strategy in OT environments for several reasons found in the study guide:
* Priority of Availability : In OT, availability and safety are critically important and prioritized higher than in IT. An offline IDS minimizes impact because it does not sit in the direct path of production traffic.
* Network Sensor Role : In this mode, the FortiGate is connected to a mirror/SPAN port on a switch. It acts as a network sensor , receiving a copy of the traffic rather than having the traffic flow through it.
This confirms Statement A is correct and Statement D is incorrect.
* Passive vs. Active : The guide explicitly states that in OT environments, passive methods are preferred over active methods to avoid negatively impacting performance or causing process interruptions.
* Depth of Visibility : Even though the device is offline, you apply security profiles (such as IPS, Application Control, and Antivirus) to the sniffer interface. This allows the FortiGate to analyze the copied traffic and provide deep visibility into the OT assets and their behaviors. This confirms Statement B is correct.
* Detection vs. Prevention : An IDS (Intrusion Detection System) is passive ; it can detect threats but cannot reset connections or drop packets to block attacks. Therefore, it cannot block zero-day attacks, making Statement C incorrect.
NEW QUESTION # 16
......
We will provide you with three different versions of our NSEI_OTS_AR-7.6 exam questions on our test platform. You have the opportunity to download the three different versions from our test platform. The three different versions of our NSEI_OTS_AR-7.6 test torrent include the PDF version, the software version and the online version. The three different versions will offer you same questions and answers, but they have different functions. According to your needs, you can choose any one version of our NSEI_OTS_AR-7.6 Guide Torrent. For example, if you need to use our products in an offline state, you can choose the online version; if you want to try to simulate the real examination, you can choose the software. In a word, the three different versions of our NSEI_OTS_AR-7.6 test torrent.
NSEI_OTS_AR-7.6 Braindumps Torrent: https://www.practicevce.com/Fortinet/NSEI_OTS_AR-7.6-practice-exam-dumps.html