No doubt the Fortinet NSEI_OTS_AR-7.6 certification is a valuable credential that helps you to put your career on the right track and assist you to achieve your professional career goals. To achieve this goal you need to pass the Fortinet NSE I - OT Security 7.6 Architect (NSEI_OTS_AR-7.6) exam. To pass the Fortinet NSE I - OT Security 7.6 Architect (NSEI_OTS_AR-7.6) exam you need to start this journey with valid, updated, and real Fortinet NSEI_OTS_AR-7.6 PDF QUESTIONS. The ActualVCE NSEI_OTS_AR-7.6 exam practice test questions are essential study material for quick Fortinet NSEI_OTS_AR-7.6 exam preparation.
| Section | Objectives |
|---|---|
| Topic 1: Network security | - Configure security inspections for industrial protocols - Configure virtual patching - Configure automation |
| Topic 2: Network access control | - Configure network segmentation schemas - Explain OT Ethernet concepts - Configure network access authentication |
| Topic 3: Asset management | - Fortinet Security Fabric for an OT network - Explain OT standard and Fortinet compliance - Implement device detection on FortiGate and FortiNAC |
| Topic 4: Monitoring and risk assessment | - Create FortiAnalyzer event handlers - Analyze security reports from FortiAnalyzer - Perform risk assessment and management |
>> NSEI_OTS_AR-7.6 Reliable Test Braindumps <<
Only high-quality and high-precision NSEI_OTS_AR-7.6 qualification question can enable learners to be confident to take the qualification examination, and our NSEI_OTS_AR-7.6 learning materials are such high-quality learning materials, it can meet the user to learn the most popular test site knowledge. Because our experts have extracted the frequent annual test centers are summarized to provide users. Only excellent learning materials such as our NSEI_OTS_AR-7.6 Study Tool can meet the needs of the majority of candidates, and now you should make the most decision is to choose our NSEI_OTS_AR-7.6 exam questions.
NEW QUESTION # 47
Refer to the exhibit.
The configuration of firewall policies is shown.
To improve the security of your OT network, you have configured authentication in the firewall policies as shown in the exhibit, with CLI parameters set to their default settings. However, when you test HTTPS access from the LAN subnet to PLC-1, it is successful without any authentication prompt.
What is the reason?
Answer: B
Explanation:
The correct answer is A . Policy ID 8 contains the Supervisors user group, so authentication is required for traffic matching that policy. However, policy ID 9 permits traffic to PLC-1 without a user or user-group authentication requirement. Fortinet explains that when an authentication policy is followed by a fall-through policy that does not require authentication , traffic can match the fall-through policy and proceed without generating a login prompt. This is particularly relevant because the default CLI setting is auth-on-demand implicitly. Under the default implicitly behavior, FortiGate does not trigger active authentication when a matching unauthenticated fall-through policy exists. Setting auth-on-demand always, or requiring authentication on all potentially matching policies, changes that behavior. Therefore, HTTPS succeeds without prompting because authentication was not configured on firewall policy ID 9 .
NEW QUESTION # 48
Refer to the exhibit.
A Logical Topology page of a FortiGate device is shown. Your OT company wants to gain visibility into the network. You decide to implement device detection with the Security Fabric. Based on the exhibit, which statement is correct? (Choose one answer)
Answer: B
Explanation:
The correct answer is A. Device Detection is enabled on the other identified device .
The study guide explains that device identification is a "useful feature for the Security Fabric topology view" and that "FortiGate detects most third-party devices in your network and adds them to the topology view of the Security Fabric." It also states that in the interfaces section, you can enable device detection , and this detection is what allows FortiGate to identify devices based on observed traffic.
In the exhibit, the tooltip distinguishes between "1 device requires authorization" and "1 other identified device." That means the unauthorized device is a separate FortiGate/Fabric member issue, while the other identified device is simply a detected third-party device shown in the topology because device detection is working. Therefore, the correct interpretation is that device detection is enabled for that identified device.
Option B is incorrect because the exhibit does not say the other identified device requires authorization.
Option C is not supported by the study guide, and option D is too specific because no evidence in the exhibit confirms that the detection was enabled specifically on port3 .
NEW QUESTION # 49
Refer to the exhibit.
An automation trigger creation wizard is shown. You want to automate some tasks in your OT network. In a FortiGate device, you create a new automation trigger based on a FortiAnalyzer event handler. When you want to configure the Event handler name field, the event handler created in FortiAnalyzer is not shown.
What are two reasons for this? (Choose two answers)
Answer: C,D
Explanation:
The correct answers are A and B .
Option B is correct because the study guide states that "When a handler generates an event with the automation stitch option enabled, FortiAnalyzer sends a notification" to FortiGate. If Automation Stitch is not enabled in the FortiAnalyzer event handler, that handler will not be usable for the FortiGate automation- stitch workflow. The guide also explains that the configuration of each event handler can include
"Automation stitches" and "Rules," showing that this is a required part of the FortiAnalyzer-to-FortiGate automation path.
Option A is also correct. The study guide explains the automation flow in the Security Fabric:
"FortiAnalyzer parses the logs and notifies the root FortiGate" and then "The root FortiGate triggers the action." That means FortiGate must have the FortiAnalyzer connection configured through the Security Fabric side before it can consume FortiAnalyzer event handlers. The warning in the exhibit about configuring a FortiAnalyzer connection also points directly to that requirement.
Option C is incorrect because + Create is not the reason the existing event handler is missing; it is only an interface control. Option D is not the best answer for this item because the question is about why the event handler name list on FortiGate is empty for FortiAnalyzer-triggered automation. The study guide's verified requirements for that workflow are the FortiAnalyzer-to-FortiGate Fabric connection and enabling Automation Stitch on the FortiAnalyzer event handler.
NEW QUESTION # 50
Refer to the exhibits.
The Playbook Monitor dashboard and the analysis of the corresponding incident analysis are shown. You created the playbook with the objective of automatically attaching the report to the incident that was created.
Which two statements are correct? (Choose two answers)
Answer: B,C
Explanation:
The correct answers are C and D .
Option D is correct because the Playbook Monitor clearly shows the starter as On_Demand and the trigger as user(admin) . The study guide states that "ON_DEMAND: The playbook runs when an administrator manually starts it" and also notes that to run it manually, you select the playbook and click Run . This exactly matches the exhibit, so the playbook was manually triggered.
Option C is also correct. The study guide explains that "tasks run one after another" and that "if needed, the output of one task can be used by the tasks that follow it." It also gives an example where workflow logic matters, such as creating an incident and then attaching details to it. In the exhibit, the sequence shown is Attach_report , then Run_report , then Create_Incident , while the incident analysis shows no report attached . Since the report must exist and the incident must already be available before it can be attached properly, the task order is wrong and must be reordered.
Option B is incorrect because the monitor shows multiple tasks completed successfully, not only Create_Incident . Option A is not the best answer because the main problem demonstrated by the exhibits is not simply waiting time, but the incorrect workflow order. The playbook completed successfully, yet the report is still not attached, which indicates a design issue in the task sequence rather than just a delay.
NEW QUESTION # 51
Match each industrial protocol to its corresponding characteristics.
Select each OT industrial protocol in the column on the left and drag and drop it into the blank space next to its corresponding characteristic in the column on the right. You must match all four industrial protocols to their characteristics in the work area.
Answer:
Explanation:
Explanation:
Industrial Protocol
Correct Characteristic
POWERLINK
Mainly used for the transmission of process data
EtherCAT
Offers real-time data transmission in a primary-secondary configuration Modbus Uses client/server communication Ethernet/IP Based entirely on Ethernet standards The correct mappings follow the industrial Ethernet characteristics defined in the OT Security 7.6 curriculum.
Ethernet/IP is the industrial protocol based entirely on Ethernet standards and adapts to the standard Ethernet
/TCP-IP architecture. EtherCAT is designed for deterministic real-time communication and specifically operates in a primary-secondary configuration while bypassing OSI layers 3 through 6. POWERLINK is an open real-time industrial Ethernet protocol that uses OSI layers 2 and 7 and is mainly intended for transmitting process data. Modbus , by contrast, uses a client/server communication model in which the server responds only after receiving a request from a client; it is not considered a real-time transmission protocol. These distinctions uniquely determine all four drag-and-drop placements.
NEW QUESTION # 52
......
Our NSEI_OTS_AR-7.6 study materials are the hard-won fruit of our experts with their unswerving efforts in designing products and choosing test questions. Pass rate is what we care for preparing for an examination, which is the final goal of our NSEI_OTS_AR-7.6 study materials. According to the feedback of our users, we have the pass rate of 99%, which is equal to 100% in some sense. The high quality of our products also embodies in its short-time learning. You are only supposed to practice NSEI_OTS_AR-7.6 Study Materials for about 20 to 30 hours before you are fully equipped to take part in the examination.
NSEI_OTS_AR-7.6 Exams: https://www.actualvce.com/Fortinet/NSEI_OTS_AR-7.6-valid-vce-dumps.html