2026 Latest Pass4sureCert JN0-364 PDF Dumps and JN0-364 Exam Engine Free Share: https://drive.google.com/open?id=1Fd7NuQbbsBcjOtVCRXBfIXxXhAL-5AQO
The pass rate is 98.75% for JN0-364 exam braindumps, and you can pass your exam in your first attempt if you choose us. Many candidates have recommended our JN0-364 exam materials to their friends for the high pass rate. In addition, we are pass guarantee and money back guarantee if you fail to pass the exam. JN0-364 Exam Braindumps cover most of knowledge points for the exam, and you can increase your professional ability in the process of learning. We offer you free update for 365 days for JN0-364 training materials after payment, and the update version will be sent to your email automatically.
| Section | Weight | Objectives |
|---|---|---|
| IPv6 | 8-12% | - Autoconfiguration - Address types and format - OSPFv3 and BGP for IPv6 - Static and dynamic routing |
| Layer 2 Bridging and VLANs | 8-12% | - VLANs and trunking - Bridging concepts - Service provider switching features |
| Border Gateway Protocol (BGP) | 20-25% | - Path selection and attributes - Configuration and troubleshooting - Basic operation and message types - Policy and route filtering - IBGP and EBGP |
| Protocol-Independent Routing | 10-15% | - Routing instances and RIB groups - Martian addresses - Load balancing - Filter-based forwarding - Static, aggregate, and generated routes |
| Tunnels | 5-8% | - Tunnel configuration and usage - GRE and IP-IP tunnels |
| Intermediate System to Intermediate System (IS-IS) | 10-15% | - Adjacencies and levels - Metrics and wide metrics - PDUs and TLVs - Configuration and monitoring |
| Open Shortest Path First (OSPF) | 15-20% | - LSA types and operation - Configuration and troubleshooting - Link-state database - Areas and router types |
| High Availability | 5-8% | - Nonstop active routing - Graceful restart - NSR and GRES concepts |
| Multiprotocol Label Switching (MPLS) | 12-18% | - Segment routing basics - LDP and RSVP - Terminology and forwarding - Labels and LIB - Configuration and monitoring |
| Spanning Tree Protocols | 8-12% | - STP, RSTP, MSTP, VSTP - Configuration and convergence - Port roles and states - BPDU and protection features |
Pass4sureCert has rich resources and JN0-364 test questions. It equips with JN0-364 exam simulations and test dumps. You can try to download questions and answers. Moreover, Pass4sureCert answers real questions. Equipping with online Juniper JN0-364 Study Guide, 100% guarantee to Pass Your JN0-364 Exam.
NEW QUESTION # 166
Which IS-IS packet type will establish and maintain neighbor relationships?
Answer: B
Explanation:
In theIS-IS (Intermediate System to Intermediate System)protocol, communication between routers is performed usingProtocol Data Units (PDUs). To discover neighbors and maintain adjacencies, IS-IS relies on theHello PDU (IIH - IS-IS Hello).
According to Juniper Networks technical documentation, when IS-IS is enabled on an interface, the router begins transmitting Hello PDUs to a multi-destination address (multicast). These PDUs contain essential information such as the router'sSystem ID, its configuredArea Addresses, and itsLevel capability(Level 1, Level 2, or both). For two routers to become neighbors, they must exchange these Hello PDUs and agree on specific parameters, such as the MTU of the link and the hello/hold timers.
Once an adjacency is established, the Hello PDU serves as a "keepalive" mechanism. If a router stops receiving Hello PDUs from a neighbor for a duration exceeding theHolding Time, it assumes the neighbor is down and flushes the associated Link-State PDUs (LSPs) from its database.
To clarify the other options:
* Link-State PDU (Option A):These are used to distribute actual topology and reachability information, not to form adjacencies.
* Partial Sequence Number PDU (Option C):PSNPs are used on point-to-point links to acknowledge the receipt of LSPs or to request missing LSPs.
* Update PDU (Option D):This is not a standard IS-IS term; in IS-IS, updates are handled via the flooding of LSPs.
NEW QUESTION # 167
Click the Exhibit button. Referring to the exhibit, which two statements are true? (Choose two.)
Answer: A,D
Explanation:
The configuration places the interface in VLAN membership for VLAN ID 10, meaning it is part of the VLAN that uses VLAN ID 10. With ethernet-switching and VLAN membership specified, the port expects frames associated with that VLAN, which are carried as tagged frames for that VLAN.
NEW QUESTION # 168
Which BGP attribute is optional, transitive, and is passed unchanged to other BGP peers if not recognized?
Answer: A
Explanation:
The Community attribute is an optional transitive BGP attribute. Optional transitive attributes are propagated to other BGP peers even if a router does not recognize them. The Community attribute is commonly used to tag routes so that routing policies can apply specific handling to those routes as they propagate through the network.
NEW QUESTION # 169
Referring to the exhibit, which statement is true about VRRP?
Answer: D
Explanation:
The exhibit shows the show vrrp summary output from two routers, with both routers listing the state of their VRRP group as master. VRRP allows for multiple routers to share a virtual IP address and a virtual MAC address, but usually, only one router is the master at any given time while others are in backup state. However, in some configurations, VRRP can operate in an active/active mode where multiple routers handle traffic simultaneously for load sharing. Since both routers show the state as master and there is no evidence of misconfiguration in the virtual IP addresses or priority, it indicates that VRRP is likely functioning in an active/active setup.
NEW QUESTION # 170
You have configured an MPLS LSP that begins on R1 and terminates on R5 using the Junos default settings.
Referring to the exhibit, which router will perform only label swap operations?
Answer: A
Explanation:
In an MPLS network, routers are categorized by their role along a Label Switched Path (LSP). In this scenario, the LSP originates onR1 (Ingress LER)and terminates onR5 (Egress LER). Between these two endpoints are the Provider (P) routers, also known as Transit Label Switching Routers (LSRs), which include R2, R3, and R4.
To identify which router performsonlylabel swap operations, we must look at the standard Junos data plane behavior:
* R1 (Ingress LER):Performs aPushoperation. It receives native IP traffic from Networks 1 or 2, looks up the destination, and imposes (pushes) an MPLS label onto the packet before sending it to R2.
* R2 and R3 (Transit LSRs):These routers perform aSwapoperation. They receive a labeled packet, look up the incoming label in their Label Forwarding Information Base (LFIB), replace it with an outgoing label provided by the downstream neighbor, and forward it.
* R4 (Penultimate Hop):By default, Junos usesPenultimate Hop Popping (PHP). Because R4 is the second-to-last router before the egress (R5), the egress router R5 advertises an "implicit-null" label (Label 3) to R4. This instructs R4 to perform aPopoperation-removing the MPLS label entirely-and sending the native IP packet to R5.
* R5 (Egress LER):Receives the packet (which is already unlabeled due to PHP) and performs a standard IP route lookup to reach the final destination in Network 3 or 4.
Among the options provided,R3is the only router that is a transit LSR butnotthe penultimate hop. While R2 also performs a swap, it is not an option. R4 performs a Pop (due to PHP), R1 performs a Push, and R5 performs an IP lookup. Therefore, R3 is the correct answer as it solely performs the label swap operation.
NEW QUESTION # 171
......
Our JN0-364 exam materials will help you pass the exam with the least time. You can pass your exam after learning 48 to 72 hours of our JN0-364 exam dumps. Since we have a professional team to edit and verify the exam materials, therefore the JN0-364 exam materials are high-quality and accurate. Besides JN0-364 Exam Dumps contain most of knowledge points of the exam, and you will have a good command of them in the process of learning. We are pass guarantee and money back guarantee. If you fail to pass the exam, we will refund your money.
Pdf JN0-364 Braindumps: https://www.pass4surecert.com/Juniper/JN0-364-practice-exam-dumps.html
BTW, DOWNLOAD part of Pass4sureCert JN0-364 dumps from Cloud Storage: https://drive.google.com/open?id=1Fd7NuQbbsBcjOtVCRXBfIXxXhAL-5AQO