We are benefiting more and more candidates for our excellent 4A0-D03 exam materials which is compiled by the professional experts accurately and skillfully. We are called the best friend on the way with our customers to help pass their 4A0-D03 exam and help achieve their dreaming certification. The reason is that we not only provide our customers with valid and reliable 4A0-D03 study questions, but also offer best service online since we uphold the professional ethical.
| Section | Weight | Objectives |
|---|---|---|
| Topic 1: Data Center Interconnect (DCI) Solutions | 25% | - BGP route policies and route reflectors - Interoperability with Nokia 7750 SR - Gateway-less EVPN DCI |
| Topic 2: SR Linux and EVPN Fundamentals | 25% | - VXLAN encapsulation and underlay - SR Linux architecture and CLI - EVPN control plane and MP-BGP |
| Topic 3: Layer 3 EVPN Services | 25% | - Symmetric and asymmetric routing - VRF integration and route targets - EVPN Route Type 5 |
| Topic 4: Layer 2 EVPN Services | 25% | - Anycast Gateway and IRB - Multi-homing and Ethernet Segments - EVPN Route Types 1โ4 |
>> Practice Nokia 4A0-D03 Exams <<
Of course, when we review a qualifying exam, we can't be closed-door. We should pay attention to the new policies and information related to the test 4A0-D03 certification. For the convenience of the users, the 4A0-D03 test materials will be updated on the homepage and timely update the information related to the qualification examination. Annual qualification examination, although content broadly may be the same, but as the policy of each year, the corresponding examination pattern grading standards and hot spots will be changed, the 4A0-D03 Test Prep can help users to spend the least time to pass the exam.
NEW QUESTION # 49
Consider the exhibit.
All IP-VRFs are configured properly and are operational.
Which of the following statements is FALSE?
Answer: D
Explanation:
Comprehensive and Detailed 150 to 250 words of Explanation From [SR Linux EVPN and Data Center Interconnect/Course Guide/topics]:
In a single-active EVPN multi-homing design, the connected PE routers perform Designated Forwarder election to determine which PE is active for the relevant service or Ethernet Segment. The DF is responsible for forwarding toward the attached segment and, in a Layer 3 multi-homing case, only the active/DF PE advertises the customer IP prefix route toward the EVPN control plane. Single-active redundancy is communicated using Ethernet Segment-related EVPN procedures, including Ethernet A-D information, so remote PEs can identify the redundancy behavior and avoid forwarding traffic to an inactive attachment. The false statement is that the elected DF uses an AD per EVI update to identify itself as primary. AD per EVI is primarily used to advertise per-service Ethernet Segment reachability and support aliasing/load-balancing behavior in multi-homed services. DF election itself is driven by Ethernet Segment route procedures, not by the DF declaring itself primary through AD per EVI. Therefore, option B misstates the role of AD per EVI in the single-active L3 multi-homing control plane. Reference: EVPN DF election, single-active multi-homing, Ethernet A-D routes.
NEW QUESTION # 50
Which of the following statements about EVPN PE-CE routing, using BGP as the routing protocol, is FALSE?
Answer: A
Explanation:
Comprehensive and Detailed 150 to 250 words of Explanation From [SR Linux EVPN and Data Center Interconnect/Course Guide/topics]:
In EVPN PE-CE routing, the PE exchanges ordinary IPv4 or IPv6 unicast routing information with the CE. When the PE learns CE prefixes, it imports them into the tenant IP-VRF and advertises them to other EVPN PEs as EVPN route type 5 IP Prefix routes. Conversely, when the PE receives EVPN routes from remote PEs, it can advertise corresponding IPv4/IPv6 BGP updates toward the CE, subject to policy. Import and export policies are essential because they control which customer routes are accepted, which EVPN-learned routes are advertised, and how attributes are modified. Option C is false because iBGP is not the preferred PE-CE model in this context. eBGP is typically preferred between PE and CE because it creates a clean administrative routing boundary between the provider/data-center edge and the customer or external router. Using eBGP also simplifies route policy, loop prevention, and operational separation. The CE does not need to participate in the EVPN overlay; it speaks standard BGP unicast with the PE, while the PE performs the EVPN RT-5 advertisement into the fabric. Reference: EVPN PE-CE BGP routing, eBGP preference, RT-5 prefix advertisement, import/export policy.
NEW QUESTION # 51
Consider the exhibit.
Which of the following is NOT configured on dcgw10 to support the Layer 3 VPN connectivity?
Answer: A
Explanation:
Comprehensive and Detailed 150 to 250 words of Explanation From [SR Linux EVPN and Data Center Interconnect/Course Guide/topics]:
In an integrated gateway-based data center interconnect design, the gateway must interwork between the data center EVPN/VXLAN domain and the WAN VPN transport domain. For Layer 3 VPN connectivity on a Nokia 7750 SR integrated gateway, the base BGP instance must support the relevant VPN address families, such as VPN-IPv4 and EVPN, because the gateway participates in control-plane exchange between the data center and WAN sides. The VPRN must also be associated with the WAN transport, normally through MPLS tunnel binding, and the VRF target must match the corresponding VPRN on the remote gateway so that VPN routes are imported and exported correctly. A routed VXLAN interface, however, is an SR Linux IP-VRF/VXLAN construct used for symmetric L3 EVPN forwarding inside a VXLAN-based data center fabric. In this question, dcgw10 is acting as the integrated WAN gateway for L3VPN connectivity, so a routed VXLAN interface is not the required configuration item on the VPRN instance. Reference: integrated gateway DCI, VPRN over MPLS, EVPN-to-VPN interworking.
NEW QUESTION # 52
Consider the exhibit.
The network is going to be designed to use interface-less symmetric routing.
Which of the following statements is TRUE?
Answer: C
Explanation:
Comprehensive and Detailed 150 to 250 words of Explanation From [SR Linux EVPN and Data Center Interconnect/Course Guide/topics]:
In interface-less symmetric routing, the EVPN fabric exchanges host forwarding information using EVPN route type 2 MAC/IP advertisements. RT-2 carries the host MAC address and, when present, the associated host IP address, allowing remote PEs to build the forwarding state needed for distributed gateway operation. Unlike asymmetric routing, interface-less symmetric routing does not require every MAC-VRF to be instantiated on every PE. The design scales better because each leaf only needs the locally attached MAC-VRFs plus the shared IP-VRF/routed VXLAN construct for inter-subnet forwarding. Option B describes an asymmetric forwarding pattern more than a symmetric one; in symmetric routing, both ingress and egress PEs perform routed forwarding functions through the IP-VRF. Option C is also incorrect because anycast gateway is fundamental when multiple leaves provide the same default-gateway service for a subnet. Therefore, the true statement is that forwarding information is exchanged using EVPN route type 2 updates. Reference: interface-less symmetric routing, EVPN RT-2 host MAC/IP signaling, distributed IRB operation.
NEW QUESTION # 53
Consider the exhibit.
Which of the following statements is FALSE?
Answer: B
Explanation:
Comprehensive and Detailed 150 to 250 words of Explanation From [SR Linux EVPN and Data Center Interconnect/Course Guide/topics]:
In an SR Linux Layer 2 EVPN MAC-VRF, locally attached MAC addresses are learned through the data plane on local access interfaces, while remote MAC addresses are learned from MP-BGP EVPN control-plane advertisements and installed with a VXLAN next-hop. The exhibit shows one local learned MAC on an Ethernet subinterface and another MAC learned through EVPN with a VXLAN interface and VNI 100. The remote VTEP or next-hop information identifies the remote endpoint, and the VNI maps the received VXLAN traffic to the correct MAC-VRF service. The false statement is C because saying that the MAC address associated with the vxlan-interface "will not age out" is too absolute. A remote EVPN MAC is not aged in the same way as a local data-plane-learned MAC, but it can still be removed when the corresponding EVPN route is withdrawn, invalidated, or no longer present in the control plane. The "N/A" style aging behavior does not mean permanent retention. Reference: SR Linux MAC-VRF verification, local MAC learning, EVPN-learned remote MACs, VXLAN VNI mapping.
NEW QUESTION # 54
......
If your job is very busy and there is not much time to specialize, and you are very eager to get a 4A0-D03 certificate to prove yourself, it is very important to choose a very high 4A0-D03 learning materials like ours that passes the rate. I know that the 99% pass rate of our 4A0-D03 Exam simulating must have attracted you. Do not hesitate anymore. You will never regret buying our 4A0-D03 study engine!
Latest 4A0-D03 Version: https://www.dumpleader.com/4A0-D03_exam.html