BONUS!!! Download part of PassLeaderVCE NSEI_OTS_AR-7.6 dumps for free: https://drive.google.com/open?id=1WfN9g-7pgWCQISRrFlWC7Z8cGGwiUF-f
Most of our clients found our NSEI_OTS_AR-7.6 exam questions and answers amazing. All they learned from PassLeaderVCE is that the Fortinet NSEI_OTS_AR-7.6 practice test questions were accurately similar to the actual questions they faced on their Fortinet NSE I - OT Security 7.6 Architect exam. It made them utterly confident to go through the whole process of the Fortinet NSE I - OT Security 7.6 Architect.Feel free to compare our quality of Fortinet NSEI_OTS_AR-7.6 Exam Questions dumps with other courses. Nothing can help people pass their Fortinet NSEI_OTS_AR-7.6 certification exam more than we do. Even people who were on their first time taking Fortinet Target NSEI_OTS_AR-7.6 certification can pass their Fortinet NSE I - OT Security 7.6 Architect exam with PassLeaderVCE's help.
| Section | Objectives |
|---|---|
| Network access control | - Explain OT Ethernet concepts - Configure network segmentation schemas - Configure network access authentication |
| Network security | - Configure security inspections for industrial protocols - Configure automation - Configure virtual patching |
| Asset management | - Fortinet Security Fabric for an OT network - Explain OT standard and Fortinet compliance - Implement device detection on FortiGate and FortiNAC |
| Monitoring and risk assessment | - Analyze security reports from FortiAnalyzer - Create FortiAnalyzer event handlers - Perform risk assessment and management |
>> Interactive NSEI_OTS_AR-7.6 Course <<
PassLeaderVCE is a reliable site offering the NSEI_OTS_AR-7.6 valid study material supported by 100% pass rate and full money back guarantee. Besides, our NSEI_OTS_AR-7.6 training material is with the high quality and can simulate the actual test environment, which make you feel in the real test situation. You can get the latest information about the NSEI_OTS_AR-7.6 real test, because our PassLeaderVCE will give you one year free update. You can be confident to face any difficulties in the NSEI_OTS_AR-7.6 actual test no matter any changes.
NEW QUESTION # 29
Refer to the exhibit.
A partial OT network is shown. You want to configure an automated alert sent by FortiAnalyzer when an attack occurs on a FortiGate device. Which two configurations must you implement? (Choose two answers)
Answer: B,C
Explanation:
The correct answers are A and D . The study guide provides a direct use case called Attack Detection and Automated Alert . It states: "A downstream FortiGate detects an attack and sends logs to FortiAnalyzer. FortiAnalyzer parses the logs and notifies the root FortiGate. The root FortiGate triggers the action, which in this case, is a notification to the administrator." The same slide also explicitly shows "Stitches configured on root FortiGate." This confirms that to send the automated alert, you must configure the automation stitch on the root FortiGate .
The second required configuration is an event handler on FortiAnalyzer . The guide explains that "Event handlers generate events" and that "FortiAnalyzer uses event handlers to filter all incoming logs. If logs match the conditions configured in an event handler, FortiAnalyzer generates an event." Since FortiAnalyzer must detect the attack from the received logs before notifying the root FortiGate, an event handler is required on FortiAnalyzer.
Option B is incorrect because the study guide does not identify a LOCALHOST task as the required configuration for this attack-alert flow. Option C is also incorrect because the question asks what must be configured to enable the automated alert workflow . An IPS profile may detect some attacks, but the required automation path in the study guide is specifically event handler on FortiAnalyzer + stitch on the root FortiGate .
NEW QUESTION # 30
You want to gain complete visibility of the entire attack surface using FortiAnalyzer.
Which two views must you use to achieve this result? (Choose two.)
Answer: A,D
Explanation:
The correct answers are C and E . Fortinet states that the SOC Dashboard provides an effective visualization of reported incidents and events and, through Security Fabric integration, enables administrators to gain complete visibility of the entire attack surface . The MITRE ATT CK Attack view complements this by presenting incident and event information according to ATT & CK-defined attack tactics and techniques, allowing analysts to understand where observed activity maps into known adversary behavior. The MITRE Coverage view has a different purpose-it measures event-handler coverage-while the Attack view focuses on actual incidents and events. Risk Summary and Resources Reports are associated primarily with FortiSIEM reporting functions, and Analytics Search is a query and investigation mechanism rather than a consolidated attack-surface view. Therefore, the required FortiAnalyzer views are MITRE ATT & CK Attack and SOC Dashboard .
NEW QUESTION # 31
Refer to the exhibits.
A partial Incident Analysis page and the log details related to the event are shown. An attack is reported on your OT network. You analyze the corresponding incident. Based on the information provided on the Incident Analysis page and the log details, which two statements are correct? (Choose two answers)
Answer: A,C
Explanation:
Based on the technical data provided in the exhibits and the OT Security 7.6 Architect curriculum:
* Industrial Protocol Identification (Statement A) : The log details exhibit clearly shows that the Destination Port used in the attack is 502 . According to the study guide ' s section on Industrial Protocol Protection , the standard port used by the Modbus TCP protocol is 502 . Furthermore, the attack name identifies a " Triangle.Research.Nano-10.PLC, " which are industrial controllers commonly utilizing Modbus for communications.
* Attack Mitigation (Statement B) : The log details specify that the Action taken by the FortiGate (Edge-FortiGate) was dropped . In cybersecurity and Fortinet fabric operations, dropping a packet associated with an IPS signature means the traffic was blocked from reaching its target, thereby mitigating the attack.
* Target IP Address (Statement E) : The log detail explicitly lists the Destination IP as 192.168.2.3 .
The Incident Analysis page also titles the incident with dstip:192.168.2.3. While the " Affected Endpoint " is shown as 10.1.5.20 , in an " outgoing " attack direction (as shown in the log), this likely refers to the internal source/attacker IP, whereas the target is the destination IP (192.168.2.3). Thus, Statement E is incorrect.
* Protocol Conflict (Statement C) : The IEC 104 protocol typically utilizes port 2404 . Since the log specifies port 502, Statement C is incorrect.
* Severity Distinction (Statement D) : While the Incident severity is marked as High , the question specifically asks about event severity. The " Events " table at the bottom of the Incident Analysis page shows a " User login/logout failed " event with a medium severity. Because there is a distinction in the management console between the severity of individual events and the aggregated incident, and Statement A and B are technically definitive based on port and action, A and B are the correct architectural choices.
NEW QUESTION # 32
Refer to the exhibit.
An industrial Ethernet protocol skipping layers 3 to 6 is shown. Which industrial Ethernet protocol is it?
(Choose one answer)
Answer: C
Explanation:
The correct answer is D. EtherCAT . The study guide explicitly states under the Ethernet/IP and EtherCAT section that "EtherCAT is a protocol that offers real-time communication in a primary-secondary configuration" and "EtherCAT skips layers 3 to 6 to deliver real-time communication." It also adds that
"the most important feature of this protocol is that secondary devices collect only the information they need from the data packets." This matches the exhibit exactly, where the diagram shows Real-Time Data above a Proprietary MAC and Proprietary physical layer , reflecting the protocol structure that bypasses the intermediate OSI layers.
The other options do not match this behavior. The guide says POWERLINK uses layer 2 and layer 7 of the OSI model, not that it skips layers 3 to 6. It also explains that Ethernet/IP is the industrial protocol based entirely on Ethernet standards and adapts to the OSI model. Modbus is described as an open client/server protocol and is not suitable for transmitting data in real time . Therefore, the protocol in the exhibit is clearly EtherCAT .
NEW QUESTION # 33
Refer to the exhibit.
A simplified OT network is shown. You want to optimize the protection of this OT network. Which two controls must you implement? (Choose two answers)
Answer: A,D
Explanation:
The correct answers are B. IPS on FortiGate_Level5 and C. Virtual patching on FortiGate_Level2 .
The study guide explains that "the first line of defense is securing the IT side of your network" and that FortiGate should be placed to protect ICS environments and stop threats from propagating from IT into OT. It also states that IPS improves OT security because "today's threat landscape requires IPS to block a wider range of threats and improve OT security" and that in IPS mode, vulnerable devices are protected . This makes FortiGate_Level5 , at the upper boundary near the DMZ and external connectivity, the correct place to implement IPS as a primary protection control.
The study guide also states in the Purdue model section that "Level 2 consists of the processes and programs that control the PLCs, RTUs, and IEDs found at Level 1" and that "it is necessary to segment, or even microsegment, these servers with firewall segmentation, along with policies that include application control and virtual patching." In addition, the virtual patching section says "Virtual patching protects OT devices that have not yet been updated against vulnerability exploits" and applies when traffic related to the vulnerable device reaches the firewall policy. Since FortiGate_Level2 sits between the process network and the control network, it is the right enforcement point for virtual patching to protect the PLC-side assets.
Option A is not one of the best answers because offline IDS only detects and logs attacks; the guide says "no traffic flows through FortiGate" in offline IDS mode, whereas IPS can actually block threats. Option D is also not the best answer because OT signatures are enabled within the IPS framework, but the stronger control explicitly described for this design is to deploy IPS at the upper boundary and virtual patching closer to vulnerable OT devices .
NEW QUESTION # 34
......
Our Software version of NSEI_OTS_AR-7.6 exam questions can carry on the simulation study, fully in accordance with the true real exam simulation, as well as the perfect timing system, at the end of the test is about to remind users to speed up the speed to solve the problem, the NSEI_OTS_AR-7.6 Training Materials let users for their own time to control has a more profound practical experience, thus effectively and perfectly improve user efficiency, let them do it keep up on NSEI_OTS_AR-7.6 exams.
New Guide NSEI_OTS_AR-7.6 Files: https://www.passleadervce.com/Fortinet-Network-Security-Expert/reliable-NSEI_OTS_AR-7.6-exam-learning-guide.html
BONUS!!! Download part of PassLeaderVCE NSEI_OTS_AR-7.6 dumps for free: https://drive.google.com/open?id=1WfN9g-7pgWCQISRrFlWC7Z8cGGwiUF-f